Hydrothermal reactions of sodium formate and sodium acetate as model intermediate products of the sodium hydroxide-promoted hydrothermal gasification of biomass
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In this work, the hydrothermal reactions of ‘intermediate’ compounds of hydrothermal biomass decomposition have been investigated in relation to reaction temperature and time. Experiments were carried out in a batch Hastelloy-C reactor from 250 °C and 4 MPa up to 500 °C and 43 MPa. The results indicate that sodium formate decomposes to mainly H2 (up to 92% yield) with little yield of CO2. The reaction of sodium formate was complete at just above 400 °C, or after 60 min at 350 °C. On the other hand, sodium acetate was stable until around 380 °C, decomposing gradually to produce mainly CH4 (up to 75% yield) and some CO2. Increasing the reaction temperature beyond 400 °C, and increasing reaction time at 450 °C, led to the increasing production of both CH4 and H2 gases from sodium acetate. These results suggested two possible decomposition patterns for sodium acetate. The predominant mechanism is the reaction with water to produce CH4 and another possible oxidation mechanism that may involve the formation of sodium oxalate at a much higher temperature. The latter mechanism may explain the formation of H2 gas from the hydrothermal reaction of sodium acetate. Selected hydrothermal reactions of sodium oxalate were carried out between 350 and 500 °C. The results showed that at 450 and 500 °C, sodium oxalate yields H2 gas and CO2 almost exclusively. This suggests the possibility of H2 gas production from sodium oxalate as an intermediate product of the reaction of sodium acetate at high temperatures. Generally, this work suggests that sodium formate and sodium acetate may be the important intermediate species that lead to the production of H2 and CH4 gases during the sodium hydroxide-promoted hydrothermal gasification of biomass.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Sınaǧ, A., Kruse, A., & Rathert, J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030475+ · Cited by 327
Chemical Reactions of C1 Compounds in Near-Critical and Supercritical Water
Watanabe, M., Sato, T., Inomata, H., Smith, R. L., Arai, K., Kruse, A., & Dinjus, E. (2004) · Chemical Reviews · doi:10.1021/cr020415y · Cited by 282
Cited by
Magdeldin, M., & Järvinen, M. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114558 · Cited by 71
De Blasio, C., Lucca, G., Özdenkci, K., Mulas, M., Lundqvist, K., Koskinen, J., Santarelli, M., Westerlund, T., & Järvinen, M. (2016) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4871 · Cited by 56
Stonor, M. R., Ouassil, N., Chen, J. G., & Park, A.-H. A. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.07.013 · Cited by 27
Metadata
- Authors
- Onwudili, J. A., & Williams, P. T.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 12
- Issue
- 12
- Pages
- 2214
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W2056966567
- Cited by
- 51
- References
- 3
- FWCI
- 1.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrothermal reactions of sodium formate and sodium acetate as model intermediate products of the sodium hydroxide-promoted hydrothermal gasification of biomass. https://app.cochat.ai/papers/10.1039/c0gc00547a
- The paper
- Onwudili, J. A., & Williams, P. T. (2010). Hydrothermal reactions of sodium formate and sodium acetate as model intermediate products of the sodium hydroxide-promoted hydrothermal gasification of biomass. Green Chemistry. https://doi.org/10.1039/c0gc00547a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.