Chain scission resists for extreme ultraviolet lithography based on high performance polysulfone-containing polymers
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A series of polymers with a comb architecture were prepared where the poly(olefin sulfone) backbone was designed to be highly sensitive to extreme ultraviolet (EUV) radiation, while the well-defined poly(methyl methacrylate) (PMMA) arms were incorporated with the aim of increasing structural stability. It is hypothesized that upon EUV radiation rapid degradation of the polysulfone backbone will occur leaving behind the well-defined PMMA arms. The synthesized polymers were characterised and have had their performance as chain-scission EUV photoresists evaluated. It was found that all materials possess high sensitivity towards degradation by EUV radiation (E0 in the range 4–6 mJ cm−2). Selective degradation of the poly(1-pentene sulfone) backbone relative to the PMMA arms was demonstrated by mass spectrometry headspace analysis during EUV irradiation and by grazing-angle ATR-FTIR. EUV interference patterning has shown that materials are capable of resolving 30 nm 1 : 1 line : space features. The incorporation of PMMA was found to increase the structural integrity of the patterned features. Thus, it has been shown that terpolymer materials possessing a highly sensitive poly(olefin sulfone) backbone and PMMA arms are able to provide a tuneable materials platform for chain scission EUV resists. These materials have the potential to benefit applications that require nanopattering, such as computer chip manufacture and nano-MEMS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Resolution, LER, and sensitivity limitations of photoresists
Gallatin, G. M., Naulleau, P., Niakoula, D., Brainard, R., Hassanein, E., Matyi, R., Thackeray, J., Spear, K., & Dean, K. (2008) · SPIE Proceedings · doi:10.1117/12.772763 · Cited by 54
Cited by
Advanced lithography materials: From fundamentals to applications
Zhang, Y., Yu, H., Wang, L., Wu, X., He, J., Huang, W., Ouyang, C., Chen, D., & Keshta, B. E. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103197 · Cited by 72
Evolution of patterning materials towards the Moore’s Law 2.0 Era
Goldfarb, D. L. (2022) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ac5534 · Cited by 47
Key Challenges and Opportunities for Advanced Extreme Ultraviolet Lithography Photoresist Materials
Li, M., & Aqad, E. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202420962 · Cited by 33
Biradar, M. R., Sagdic, G., Yuan, C., Marui, R., & Ober, C. K. (2026) · Chemical Reviews · doi:10.1021/acs.chemrev.5c01043 · Cited by 6
The chemistry and application of nonchemically amplified (non-CA) chain-scission resists
Whittaker, A. K. (2016) · Frontiers of Nanoscience · doi:10.1016/b978-0-08-100354-1.00006-5 · Cited by 3
Self-citation
Metadata
- Authors
- Lawrie, K. J., Blakey, I., Blinco, J. P., Cheng, H. H., Gronheid, R., Jack, K. S., Pollentier, I., Leeson, M. J., Younkin, T. R., & Whittaker, A. K.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 15
- Pages
- 5629
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2028023447
- Cited by
- 57
- References
- 1
- FWCI
- 2.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.