The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
From Ni-YSZ to sulfur-tolerant anode materials for SOFCs: electrochemical behavior, in situ characterization, modeling, and future perspectives
Abstract
Solid oxide fuel cells (SOFCs) offer great promise for the most efficient and cost-effective conversion to electricity of a wide variety of fuels such as hydrocarbons, coal gas, and gasified carbonaceous solids. However, the conventional Ni-YSZ (yttria-stabilized zirconia) anode is highly susceptible to deactivation (poisoning) by contaminants commonly encountered in readily available fuels, especially sulfur-containing compounds. Thus, one of the critical challenges facing the realization of fuel-flexible and cost-effective SOFC systems is the development of sulfur-tolerant anode materials. This perspective article aims at providing a comprehensive review of materials that have been studied as anodes for SOFCs, the electrochemical behavior of various anode materials in H2S-contaminated fuels, experimental methods for ex situ and in situ characterizations of species and phases formed on anode surfaces upon exposure to H2S-containing fuels, mechanisms for the interactions between H2S and anode surfaces as predicted from density functional theory (DFT) calculations, and possible strategies of minimizing or eliminating the effect of sulfur poisoning. While significant progress has been made in developing alternative anode materials with better sulfur tolerance, in probing and mapping electrode surface species relevant to sulfur poisoning, and in unraveling the mechanisms of H2S–anode interactions using both computational and experimental approaches, many challenges still remain to bridge the gaps between models at different scales or between theoretical predictions and experimental observations. An important new direction for future research is to develop a predictive multi-scale (from DFT to continuum) computational framework, through a rigorous validation at each scale by carefully-designed experiments performed under in situ conditions, for rational design of better sulfur-tolerant anode materials and structures for a new generation of SOFCs to be powered by readily available fuels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Density-functional theory and strong interactions: Orbital ordering in Mott-Hubbard insulators
Liechtenstein, A. I., Anisimov, V. I., & Zaanen, J. (1995) · Physical Review B · doi:10.1103/physrevb.52.r5467 · Cited by 4,803
Introduction to Computational Chemistry
Jensen, F. (1998) · Cited by 4,669
Theoretical surface science and catalysis—calculations and concepts
Hammer, B., & Nørskov, J. K. (2000) · Advances in Catalysis · doi:10.1016/s0360-0564(02)45013-4 · Cited by 3,972
Minh, N. Q. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb03645.x · Cited by 3,839
Insights into Current Limitations of Density Functional Theory
Cohen, A. J., Mori-Sánchez, P., & Yang, W. (2008) · Science · doi:10.1126/science.1158722 · Cited by 2,527
Advanced anodes for high-temperature fuel cells
Atkinson, A., Barnett, S., Gorte, R. J., Irvine, J. T. S., McEvoy, A. J., Mogensen, M., Singhal, S. C., & Vohs, J. (2004) · Nature Materials · doi:10.1038/nmat1040 · Cited by 1,427
Kitchin, J. R., Nørskov, J. K., Barteau, M. A., & Chen, J. G. (2004) · The Journal of Chemical Physics · doi:10.1063/1.1737365 · Cited by 1,358
Yang, L., Wang, S., Blinn, K., Liu, M., Liu, Z., Cheng, Z., & Liu, M. (2009) · Science · doi:10.1126/science.1174811 · Cited by 1,225
Self-citationQM/MM: what have we learned, where are we, and where do we go from here?
Lin, H., & Truhlar, D. G. (2007) · Theoretical Chemistry Accounts · doi:10.1007/s00214-006-0143-z · Cited by 1,200
Science and Technology of Ceramic Fuel Cells
(1995) · Elsevier eBooks · doi:10.1016/b978-0-444-89568-4.x5001-4 · Cited by 1,181
Double Perovskites as Anode Materials for Solid-Oxide Fuel Cells
Huang, Y.-H., Dass, R. I., Xing, Z.-L., & Goodenough, J. B. (2006) · Science · doi:10.1126/science.1125877 · Cited by 1,070
E LECTRONIC S TRUCTURE AND C ATALYSIS ON M ETAL S URFACES
Greeley, J., Nørskov, J. K., & Mavrikakis, M. (2002) · Annual Review of Physical Chemistry · doi:10.1146/annurev.physchem.53.100301.131630 · Cited by 993
Direct Hydrocarbon Solid Oxide Fuel Cells
McIntosh, S., & Gorte, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020725g · Cited by 897
The nature of the active site in heterogeneous metal catalysis
Nørskov, J. K., Bligaard, T., Hvolbæk, B., Abild-Pedersen, F., Chorkendorff, I., & Christensen, C. H. (2008) · Chemical Society Reviews · doi:10.1039/b800260f · Cited by 885
Direct Hydrocarbon Solid Oxide Fuel Cells
van den Bossche, M., & McIntosh, S. (2012) · Springer eBooks · doi:10.1007/978-1-4614-5785-5_3 · Cited by 686
A review on the status of anode materials for solid oxide fuel cells
Zhu, W., & Deevi, S. C. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(03)00620-8 · Cited by 663
Matsuzaki, Y. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00653-6 · Cited by 599
Recent anode advances in solid oxide fuel cells
Sun, C., & Stimming, U. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.086 · Cited by 598
Thermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate
Marina, O. A. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00140-6 · Cited by 583
Bartholomew, C. H., Agrawal, P. K., & Katzer, J. R. (1982) · Advances in Catalysis · doi:10.1016/s0360-0564(08)60454-x · Cited by 581
Large-Scale Molecular Dynamics Simulations of Self-Assembling Systems
Klein, M. L., & Shinoda, W. (2008) · Science · doi:10.1126/science.1157834 · Cited by 416
Redox Cycling of Ni‐Based Solid Oxide Fuel Cell Anodes: A Review
Sarantaridis, D., & Atkinson, A. (2007) · Fuel Cells · doi:10.1002/fuce.200600028 · Cited by 416
Hydrogen generation from natural gas for the fuel cell systems of tomorrow
Dicks, A. L. (1996) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02347-6 · Cited by 408
Sulfur-tolerant anode materials for solid oxide fuel cell application
Gong, M., Liu, X., Trembly, J., & Johnson, C. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.026 · Cited by 378
Yang, L., Choi, Y., Qin, W., Chen, H., Blinn, K., Liu, M., Liu, P., Bai, J., Tyson, T. A., & Liu, M. (2011) · Nature Communications · doi:10.1038/ncomms1359 · Cited by 334
Self-citationRaman Spectroscopy of Nickel Sulfide Ni3S2
Cheng, Z., Abernathy, H., & Liu, M. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0770209 · Cited by 298
Self-citationOxidation of Hydrogen on Ni/Yttria‐Stabilized Zirconia Cermet Anodes
Primdahl, S., & Mogensen, M. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1838026 · Cited by 282
H[sub 2]S Poisoning of Solid Oxide Fuel Cells
Sasaki, K., Susuki, K., Iyoshi, A., Uchimura, M., Imamura, N., Kusaba, H., Teraoka, Y., Fuchino, H., Tsujimoto, K., Uchida, Y., et al. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2336075 · Cited by 274
Molecular-level descriptions of surface chemistry in kinetic models using density functional theory
Gokhale, A. A., Kandoi, S., Greeley, J. P., Mavrikakis, M., & Dumesic, J. A. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.09.038 · Cited by 272
Sulfur Poisoning and Regeneration of Ni-Based Anodes in Solid Oxide Fuel Cells
Zha, S., Cheng, Z., & Liu, M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2404779 · Cited by 267
Self-citationChallenges in Modeling Materials Properties Without Experimental Input
Carter, E. A. (2008) · Science · doi:10.1126/science.1158009 · Cited by 254
Blaylock, D. W., Ogura, T., Green, W. H., & Beran, G. J. O. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp806527q · Cited by 253
Cheng, Z., & Liu, M. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.04.004 · Cited by 247
Self-citationOxide anode materials for solid oxide fuel cells
Fergus, J. W. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.07.012 · Cited by 242
Properties of Ni/YSZ cermet as anode for SOFC
Koide, H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00652-4 · Cited by 234
Efficient Monte Carlo methods for the simulation of catalytic surface reactions
Lukkien, J. J., Segers, J. P. L., Hilbers, P. A. J., Gelten, R. J., & Jansen, A. P. J. (1998) · Physical Review E · doi:10.1103/physreve.58.2598 · Cited by 223
The effect of H2S on the performance of Ni–YSZ anodes in solid oxide fuel cells
Rasmussen, J. F. B., & Hagen, A. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.001 · Cited by 197
A solid oxide fuel cell operating on hydrogen sulfide (H2S) and sulfur-containing fuels
Aguilar, L., Zha, S., Cheng, Z., Winnick, J., & Liu, M. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.03.061 · Cited by 191
Self-citationElectrical properties and sulfur tolerance of La0.75Sr0.25Cr1−xMnxO3 under anodic conditions
Zha, S., Tsang, P., Cheng, Z., & Liu, M. (2005) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2005.03.027 · Cited by 184
Self-citationHighly Sulfur Tolerant Cu-Ceria Anodes for SOFCs
He, H., Gorte, R. J., & Vohs, J. M. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1896469 · Cited by 178
Perspectives on the first principles elucidation and the design of active sites
Neurock, M. (2003) · Journal of Catalysis · doi:10.1016/s0021-9517(02)00115-x · Cited by 168
Fuel cells for micro-combined heat and power generation
Hawkes, A., Staffell, I., Brett, D., & Brandon, N. (2009) · Energy & Environmental Science · doi:10.1039/b902222h · Cited by 166
Bessler, W. G., Vogler, M., Störmer, H., Gerthsen, D., Utz, A., Weber, A., & Ivers‐Tiffée, E. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp00541j · Cited by 166
Dong, J., Cheng, Z., Zha, S., & Liu, M. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.06.016 · Cited by 154
Self-citationY-doped SrTiO3 based sulfur tolerant anode for solid oxide fuel cells
Kurokawa, H., Yang, L., Jacobson, C. P., Jonghe, L. C. D., & Visco, S. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.11.048 · Cited by 153
Self-citationInfluence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cells
Cheng, Z., Zha, S., & Liu, M. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.052 · Cited by 147
Self-citationComputational study of sulfur–nickel interactions: A new S–Ni phase diagram
Wang, J., & Liu, M. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.06.022 · Cited by 138
Self-citationDurability of solid oxide fuel cells using sulfur containing fuels
Hagen, A., Rasmussen, J. F. B., & Thydén, K. T. S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.053 · Cited by 132
High performance solid oxide fuel cell operating on dry gasified coal
Gür, T. M., Homel, M. A., & Virkar, A. V. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.098 · Cited by 132
Trends of Water Gas Shift Reaction on Close-Packed Transition Metal Surfaces
Huang, S.-C., Lin, C.-H., & Wang, J. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1005814 · Cited by 109
Self-citationU.S. DOE fossil energy fuel cells program
Williams, M. C., Strakey, J. P., & Sudoval, W. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.085 · Cited by 104
Thermodynamics of sulfur chemisorption on metals. I. Alumina-supported nickel
McCarty, J. G., & Wise, H. A. (1980) · The Journal of Chemical Physics · doi:10.1063/1.439156 · Cited by 104
Break Down of Losses in Thin Electrolyte SOFCs
Barfod, R., Hagen, A., Ramousse, S., et al. (2006) · Fuel Cells · doi:10.1002/fuce.200500113 · Cited by 102
Laursen, S., & Linic, S. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.026101 · Cited by 99
Ceria Nanocoating for Sulfur Tolerant Ni-Based Anodes of Solid Oxide Fuel Cells
Kurokawa, H., Sholklapper, T. Z., Jacobson, C. P., Jonghe, L. C. D., & Visco, S. J. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2748630 · Cited by 98
Chemical, electrical, and thermal properties of strontium doped lanthanum vanadate
Cheng, Z., ZHA, S., AGUILAR, L., & Liu, M. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.05.009 · Cited by 97
Self-citationYang, L., Cheng, Z., Liu, M., & Wilson, L. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00386g · Cited by 89
Self-citationGrgicak, C. M., Pakulska, M. M., O’Brien, J. S., & Giorgi, J. B. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.05.002 · Cited by 87
A Direct H 2 S / Air Solid Oxide Fuel Cell
Pujare, N. U., Semkow, K. W., & Sommells, A. F. (1987) · Journal of The Electrochemical Society · doi:10.1149/1.2100262 · Cited by 81
Wang, J., & Liu, M. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.10.025 · Cited by 80
Self-citationSuzuki, T., Uchinokura, K., Sekine, T., & Matsuura, E. (1977) · Solid State Communications · doi:10.1016/0038-1098(77)90967-x · Cited by 70
High-temperature solid oxide fuel cell — technical status
Feduska, W., & Isenberg, A. O. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)80009-3 · Cited by 69
Light scattering and ir measurements in XS2 pryite-type compounds
Anastassakis, E., & Perry, C. H. (1976) · The Journal of Chemical Physics · doi:10.1063/1.432711 · Cited by 66
A First-Principles Analysis for Sulfur Tolerance of CeO2in Solid Oxide Fuel Cells
Chen, H., Choi, Y., Liu, M., et al. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0705774 · Cited by 66
Self-citationQuantum Dynamics of Chemical Reactions
Clary, D. C. (2008) · Science · doi:10.1126/science.1157718 · Cited by 63
Raman spectroscopy of NiSe2and NiS2-xSex(0<x<2) thin films
Heras, C. D. L., & Agulló-Rueda, F. (2000) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/12/24/320 · Cited by 60
Use of Metal Sulfides as Anode Catalysts in H[sub 2]S-Air SOFCs
Liu, M., Wei, G.-L., Luo, J., Sanger, A. R., & Chuang, K. T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1583715 · Cited by 60
Self-citationIn Situ Optical Studies of Solid-Oxide Fuel Cells
Pomfret, M. B., Owrutsky, J. C., & Walker, R. A. (2010) · Annual Review of Analytical Chemistry · doi:10.1146/annurev.anchem.111808.073641 · Cited by 60
A Solid Oxide Fuel Cell Running on H[sub 2]S∕CH[sub 4] Fuel Mixtures
Cheng, Z., Zha, S., Aguilar, L., Wang, D., Winnick, J., & Liu, M. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2137467 · Cited by 59
Self-citationUtilization of Hydrogen Sulfide in an Intermediate‐Temperature Ceria‐Based Solid Oxide Fuel Cell
Peterson, D., & Winnick, J. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838503 · Cited by 58
Stability of Materials as Candidates for Sulfur-Resistant Anodes of Solid Oxide Fuel Cells
Cheng, Z., Zha, S., & Liu, M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2198107 · Cited by 57
Self-citationAnode Materials for a Hydrogen Sulfide Solid Oxide Fuel Cell
Yates, C., & Winnick, J. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392017 · Cited by 56
Performance of a solid oxide fuel cell utilizing hydrogen sulfide as fuel
Liu, M., He, P., Luo, J., Sanger, A. R., & Chuang, K. T. T. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00660-1 · Cited by 53
Self-citationA Sulfur-Tolerant Anode Material for SOFCs
Zha, S., Cheng, Z., & Liu, M. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1945370 · Cited by 53
Self-citationThe Effect of H2S on the Performance of SOFCs using Methane Containing Fuel
Rasmussen, J. F. B., & Hagen, A. (2010) · Fuel Cells · doi:10.1002/fuce.201000012 · Cited by 48
Chen, X. J., Liu, Q. L., Chan, S. H., Brandon, N. P., & Khor, K. A. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2780866 · Cited by 39
Mitigation of Sulfur Poisoning of Ni/Zirconia SOFC Anodes by Antimony and Tin
Marina, O. A., Coyle, C. A., Engelhard, M., & Pederson, L. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3552357 · Cited by 37
A density functional theory study of sulfur poisoning
McAllister, B., & Hu, P. (2005) · The Journal of Chemical Physics · doi:10.1063/1.1854125 · Cited by 34
Choi, Y., Mebane, D. S., Wang, J., & Liu, M. (2007) · Topics in Catalysis · doi:10.1007/s11244-007-9011-x · Cited by 34
Self-citationDensity functional theory study of hydrogen sulfide dissociation on bi-metallic Ni–Mo catalysts
Albenze, E. J., & Shamsi, A. (2006) · Surface Science · doi:10.1016/j.susc.2006.06.006 · Cited by 33
He, P., Liu, M., Luo, J., Sanger, A. R., & Chuang, K. T. T. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1479156 · Cited by 31
Self-citationInvestigations into the interactions between sulfur and anodes for solid oxide fuel cells
Cheng, Z. (2008) · SMARTech Repository (Georgia Institute of Technology) · Cited by 5
Self-citation
Cited by
Progress in material selection for solid oxide fuel cell technology: A review
Mahato, N., Banerjee, A., Gupta, A., Omar, S., & Balani, K. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.001 · Cited by 1,536
Sengodan, S., Choi, S., Jun, A., Shin, T. H., Ju, Y.-W., Jeong, H. Y., Shin, J., Irvine, J. T. S., & Kim, G. (2015) · Nature Materials · doi:10.1038/nmat4166 · Cited by 746
Feng, J.-X., Wu, J.-Q., Tong, Y.-X., & Li, G.-R. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b08521 · Cited by 671
Zou, X., Liu, Y., Li, G., Wu, Y., Liu, D., Li, W., Li, H., Wang, D., Zhang, Y., & Zou, X. (2017) · Advanced Materials · doi:10.1002/adma.201700404 · Cited by 589
Song, M.-K., Park, S., Alamgir, F. M., Cho, J., & Liu, M. (2011) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2011.06.001 · Cited by 540
Self-citation
Metadata
- Authors
- Cheng, Z., Wang, J.-H., Choi, Y., Yang, L., Lin, M. C., & Liu, M.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 11
- Pages
- 4380
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1986564234
- Cited by
- 335
- References
- 82
- FWCI
- 12.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.