The DOI matches its Crossref record.
How should you measure your excitonic solar cells?
Abstract
The research field of photovoltaics is booming due to the recognised imperative to realise a long term solutions to clean and inexpensive power generation. With this rapid growth in activity, new concepts and new directions, it is becoming more and more important to be able to effectively compare technological advances made in different research groups, and between the different competing technologies. In this article it is illustrated how challenging it can be to fairly asses the efficiency of a solar cell. Specific examples of how much of an influence a range of measurement practices can have on the estimated short-circuit photocurrents and efficiencies are shown for a number of the most commonly researched excitonic solar cell concepts. In the worst case scenario, systematic overestimations by a factor of 5 can be made. For completeness, the influence of the light source, and the correct method to properly calibrate a solar simulator and estimate the spectral mismatch factor is also described. The error in calibrating the light source is actually likely to lead to a much smaller variance than the definition of the active area of the solar cell. The undeniable implication is that it is essential for excitonic solar cells to be correctly masked to define the active area, if the measured efficiency is to bear a true resemblance of the device performance. Adoption of standard protocols across the field will enable a much better comparison between literature values of efficiency and more rapid and well directed technological advancement will occur.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Self-citationEperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Self-citationPerovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Self-citationXiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Anchoring Groups for Dye-Sensitized Solar Cells
Zhang, L., & Cole, J. M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507334m · Cited by 825
Abate, A., Leijtens, T., Pathak, S., Teuscher, J., Avolio, R., Errico, M. E., Kirkpatrik, J., Ball, J. M., Docampo, P., McPherson, I., et al. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44397j · Cited by 674
Self-citationHybrid Perovskite/Perovskite Heterojunction Solar Cells
Hu, Y., Schlipf, J., Wussler, M., Petrus, M. L., Jaegermann, W., Bein, T., Müller-Buschbaum, P., & Docampo, P. (2016) · ACS Nano · doi:10.1021/acsnano.6b01535 · Cited by 345
High Performance All‐Polymer Solar Cell via Polymer Side‐Chain Engineering
Zhou, Y., Kurosawa, T., Ma, W., Guo, Y., Fang, L., Vandewal, K., Diao, Y., Wang, C., Yan, Q., Reinspach, J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201306242 · Cited by 338
Chen, Y.-H., Lin, L.-Y., Lu, C.-W., Lin, F., Huang, Z.-Y., Lin, H.-W., Wang, P.-H., Liu, Y.-H., Wong, K.-T., Wen, J., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301872s · Cited by 274
Faber, M. S., Park, K., Cabán-Acevedo, M., Santra, P. K., & Jin, S. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400642e · Cited by 206
Metadata
- Authors
- Snaith, H. J.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 4
- Pages
- 6513
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2152511172
- Cited by
- 207
- References
- 0
- FWCI
- 19.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.