Activated carbon monoliths for gas storage at room temperature
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Porous materials are interesting candidates for gas storage in different applications. The present study analyses at room temperature the high pressure storage of H2, CH4 and CO2 in a number of porous carbons (eight monoliths and two powdered activated carbons). The samples cover a wide range of porosities and densities (monoliths having high porosity with moderate density or moderate porosity with high density) with the aim to discuss the relative importance that the sample surface area has on the volumetric storage capacity, in relation to the importance of the density of the material. Our results show that the gravimetric storage capacities of the three studied gases are controlled by the textural properties of the adsorbent, whereas the volumetric storage capacities are mainly controlled by the adsorbent density. High volumetric excess adsorption capacity values (for example, H2: 10 g l−1; CH4: 110 g l−1 and CO2: 440 g l−1) correspond to monoliths having high densities, despite their moderately developed porosities. This paper also compares these results with those obtained similarly (same gases and same experimental conditions) using the highest known surface area material (MOF-210). In summary, our volumetric results, obtained with commercially available ATMI monoliths and their CO2 activation, are, to the best of our knowledge, amongst the highest that have been reported; higher than the high surface area samples of the M3M monolith prepared from Maxsorb (SBET: 2610 m2 g−1) or MOF-210 (SBET: 6240 m2 g−1). Although a variety of MOFs have been reported to exceed our results, oftentimes these values are overestimated due to the fact that the volumetric capacity of MOFs was calculated using crystal density rather than experimentally measured density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processes of adsorption and diffusion on solid surfaces
Lennard-Jones, J. E. (1932) · Transactions of the Faraday Society · doi:10.1039/tf9322800333 · Cited by 795
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Cited by
Hou, J., Cao, C., Idrees, F., & Ma, X. (2015) · ACS Nano · doi:10.1021/nn506394r · Cited by 1,529
Sun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Synthesis of functionalized 3D hierarchical porous carbon for high-performance supercapacitors
Qie, L., Chen, W., Xu, H., Xiong, X., Jiang, Y., Zou, F., Hu, X., Xin, Y., Zhang, Z., & Huang, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41638k · Cited by 1,147
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Baby, R., Saifullah, B., & Hussein, M. Z. (2019) · Nanoscale Research Letters · doi:10.1186/s11671-019-3167-8 · Cited by 364
Nanoporous Materials for the Onboard Storage of Natural Gas
Kumar, K. V., Preuss, K., Titirici, M.-M., & Rodríguez-Reinoso, F. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00505 · Cited by 350
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Activated carbon from biomass precursors using phosphoric acid: A review
Neme, I., Gonfa, G., & Masi, C. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e11940 · Cited by 311
Zeolite-templated carbons – three-dimensional microporous graphene frameworks
Nishihara, H., & Kyotani, T. (2018) · Chemical Communications · doi:10.1039/c8cc01932k · Cited by 266
Zhuo, H., Hu, Y., Tong, X., Zhong, L., Peng, X., & Sun, R. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.04.041 · Cited by 196
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Adeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
Metadata
- Authors
- Marco-Lozar, J. P., Kunowsky, M., Suárez-García, F., Carruthers, J. D., & Linares-Solano, A.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 12
- Pages
- 9833
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2098136724
- Cited by
- 133
- References
- 2
- FWCI
- 4.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.