The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Materials challenges for the development of solid sorbents for post-combustion carbon capture
Abstract
In an effort to reduce the energy penalty and cost associated with state-of-the-art carbon capture technologies, a range of 2nd and 3rd generation CO2 capture technologies are being developed. One of these technologies, based on solid sorbents for the gas separation in carbon capture, has the potential to significantly reduce the energy penalty and avoid some of the problems associated with the current technologies. However to realise this potential, two main developments are required: new porous materials and new plant integration processes. This application note describes the performance requirements and challenges associated with the development of functional materials for this application. We describe the key challenges for materials development and the requirements in terms of operating conditions, gas composition, stability, and lifetime to make solid sorbents a viable large scale CO2 capture process. Examples of potential future research and breakthrough materials currently being developed are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Advances in principal factors influencing carbon dioxide adsorption on zeolites
Bonenfant, D., Kharoune, M., Niquette, P., Mimeault, M., & Hausler, R. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/1/013007 · Cited by 351
Functionalized MOFs for Enhanced CO2 Capture
Torrisi, A., Bell, R. G., & Mellot-Draznieks, C. (2010) · Crystal Growth & Design · doi:10.1021/cg100646e · Cited by 293
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Cited by
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Siegelman, R. L., Milner, P. J., Kim, E. J., Weston, S. C., & Long, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00505f · Cited by 203
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
N-doped porous carbon derived from polypyrrole for CO2 capture from humid flue gases
Wang, Z., Goyal, N., Liu, L., Tsang, D. C. W., Shang, J., Liu, W., & Li, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125376 · Cited by 117
Superior CO 2 adsorption from waste coffee ground derived carbons
Travis, W., Gadipelli, S., & Guo, Z. (2015) · RSC Advances · doi:10.1039/c4ra13026j · Cited by 86
Self-citation
Metadata
- Authors
- Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R.
- Venue
- J. Mater. Chem.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 7
- Pages
- 2815-2823
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1994823469
- Cited by
- 292
- References
- 6
- FWCI
- 46.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Materials challenges for the development of solid sorbents for post-combustion carbon capture. https://app.cochat.ai/papers/10.1039/c2jm12592g
- The paper
- Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R. (2012). Materials challenges for the development of solid sorbents for post-combustion carbon capture. J. Mater. Chem. https://doi.org/10.1039/c2jm12592g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
