The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Functional conjugated microporous polymers: from 1,3,5-benzene to 1,3,5-triazine
Abstract
Conjugated microporous polymers (CMPs) based on the electron-withdrawing 1,3,5-triazine node (TCMPs) were synthesized by palladium-catalyzed Sonogashira-Hagihara cross-coupling. The porosity in these polymers was found to be comparable to the analogous 1,3,5-connected benzene CMP systems that we reported previously, demonstrating that nodes can be substituted in these amorphous materials in a rational manner, much as for certain crystalline porous metal–organic frameworks. The CO2 adsorption properties of the TCMPs were measured and compared with the corresponding CMPs, and it was found that the TCMP networks adsorbed more CO2 than CMP analogues with comparable BET surface areas. Network TNCMP-2 showed the highest surface area (995 m2 g−1) and a CO2 uptake of 1.45 mmol g−1 at 1 bar at 298 K. The band gap in these triazine-based CMPs could also be engineered through copolymerization with other functional monomers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Ren, S., Zeng, D., Zhong, H., Wang, Y., Qian, S., & Fang, Q. (2010) · The Journal of Physical Chemistry B · doi:10.1021/jp104710y · Cited by 97
Self-citation
Cited by
Conjugated microporous polymers: design, synthesis and application
Xu, Y., Jin, S., Xu, H., Nagai, A., & Jiang, D. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60160a · Cited by 1,683
Porous Organic Materials: Strategic Design and Structure–Function Correlation
Das, S., Heasman, P., Ben, T., & Qiu, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00439 · Cited by 1,286
Chu, S., Wang, Y., Guo, Y., Feng, J., Wang, C., Luo, W., Fan, X., & Zou, Z. (2013) · ACS Catalysis · doi:10.1021/cs4000624 · Cited by 521
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Porous covalent–organic materials: synthesis, clean energy application and design
Xiang, Z., & Cao, D. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00063f · Cited by 351
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Microporous Functionalized Triazine-Based Polyimides with High CO2 Capture Capacity
Liebl, M. R., & Senker, J. (2013) · Chemistry of Materials · doi:10.1021/cm4000894 · Cited by 269
Conjugated porous polymers: incredibly versatile materials with far-reaching applications
Taylor, D., Dalgarno, S. J., Xu, Z., & Vilela, F. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00315k · Cited by 259
Fungi-based porous carbons for CO2 adsorption and separation
Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32139d · Cited by 220
Metadata
- Authors
- Ren, S., Dawson, R., Laybourn, A., Jiang, J.-X., Khimyak, Y., Adams, D. J., & Cooper, A. I.
- Venue
- Polymer Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 3
- Issue
- 4
- Pages
- 928
- ISSN
- 1759-9954 (ISSN-L)
- 1759-9962
- OpenAlex
- W2102207104
- Cited by
- 215
- References
- 2
- FWCI
- 8.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.