The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Novel C3N4–CdS composite photocatalysts with organic–inorganic heterojunctions: in situ synthesis, exceptional activity, high stability and photocatalytic mechanism
Abstract
Novel organic–inorganic composites composed of two visible light responsive semiconductors of graphitic carbon nitride (C3N4) and CdS were successfully synthesized via an “in situ” precipitation–deposition method. The C3N4–CdS heterostructures were fabricated by depositing CdS nanoparticles onto the surface of C3N4. The morphology and optical property of compsoites can be tuned by adjusting the mass ratio of C3N4–CdS, which determines the enhanced level of photocatalytic activity. The optimum activity of 0.7C3N4–0.3CdS photocatalyst is almost 20.5 and 3.1 times higher than those of individual C3N4 and CdS for the degradation of methyl orange, and 41.6 and 2.7 fold higher for the degradation of 4-aminobenzoic acid, respectively. Moreover, its activity is also much higher than those of C3N4–TiO2 and CdS–TiO2 composites, as well as N-modified TiO2. Of special significance is that the present C3N4–CdS composites exhibit high stabilities under illumination, in contrast with CdS. The enhancement in both performance and stability should be assigned to the effective separation and transfer of photogenerated charges originating from the well-matched overlapping band-structures and closely contacted interfaces. Our work highlights that coupling semiconductors with well-matched band energies provides a flexible route to improve the activity and stability of photocatalysts, and gives ideas for the design and synthesis of other highly active and stable materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Environmental applications of semiconductor photocatalysis
Hoffmann, M. R., Martin, S. T., Choi, W., & Bahnemann, D. W. (1995) · Chemical Reviews · doi:10.1021/cr00033a004 · Cited by 18,495
A metal-free polymeric photocatalyst for hydrogen production from water under visible light
Wang, X., Maeda, K., Thomas, A., Takanabe, K., Xin, G., Carlsson, J. M., Domen, K., & Antonietti, M. (2009) · Nature Materials · doi:10.1038/nmat2317 · Cited by 12,532
Heterogeneous photocatalyst materials for water splitting
Kudo, A., & Miseki, Y. (2009) · Chem. Soc. Rev. · doi:10.1039/b800489g · Cited by 10,585
Semiconductor-based Photocatalytic Hydrogen Generation
Chen, X., Shen, S., Guo, L., & Mao, S. S. (2010) · Chemical Reviews · doi:10.1021/cr1001645 · Cited by 7,876
Wang, Y., Wang, X., & Antonietti, M. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201101182 · Cited by 3,364
Photodegradation Performance of g-C3N4 Fabricated by Directly Heating Melamine
Yan, S. C., Li, Z. S., & Zou, Z. G. (2009) · Langmuir · doi:10.1021/la900923z · Cited by 2,777
Semiconductor-mediated photodegradation of pollutants under visible-light irradiation
Chen, C., Ma, W., & Zhao, J. (2010) · Chemical Society Reviews · doi:10.1039/b921692h · Cited by 2,214
Unique Electronic Structure Induced High Photoreactivity of Sulfur-Doped Graphitic C3N4
Liu, G., Niu, P., Sun, C., Smith, S. C., Chen, Z., Lu, G. Q. (., & Cheng, H.-M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja103798k · Cited by 2,024
Xiang, Q., Yu, J., & Jaroniec, M. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp200953k · Cited by 1,843
Wang, X., Maeda, K., Chen, X., Takanabe, K., Domen, K., Hou, Y., Fu, X., & Antonietti, M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809307s · Cited by 1,809
Zheng, Y., Liu, J., Liang, J., Jaroniec, M., & Qiao, S. Z. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03479d · Cited by 1,741
Yan, S. C., Li, Z. S., & Zou, Z. G. (2010) · Langmuir · doi:10.1021/la904023j · Cited by 1,670
Phosphorus-Doped Carbon Nitride Solid: Enhanced Electrical Conductivity and Photocurrent Generation
Zhang, Y., Mori, T., Ye, J., & Antonietti, M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja101749y · Cited by 1,336
Metal‐Containing Carbon Nitride Compounds: A New Functional Organic–Metal Hybrid Material
Wang, X., Chen, X., Thomas, A., Fu, X., & Antonietti, M. (2009) · Advanced Materials · doi:10.1002/adma.200802627 · Cited by 1,333
Ionothermal Synthesis of Crystalline, Condensed, Graphitic Carbon Nitride
Bojdys, M. J., Müller, J., Antonietti, M., & Thomas, A. (2008) · Chemistry – A European Journal · doi:10.1002/chem.200800190 · Cited by 1,230
Photocatalysis A to Z—What we know and what we do not know in a scientific sense
Ohtani, B. (2010) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2011.02.001 · Cited by 749
Liao, G., Chen, S., Quan, X., Yu, H., & Zhao, H. (2012) · J. Mater. Chem. · doi:10.1039/c1jm13490f · Cited by 735
Ge, L., Zuo, F., Liu, J., Ma, Q., Wang, C., Sun, D., Bartels, L., & Feng, P. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3041692 · Cited by 704
Preparation of highly visible-light active N-doped TiO2 photocatalyst
Yang, G., Jiang, Z., Shi, H., Xiao, T., & Yan, Z. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00376j · Cited by 689
Sun, J.-X., Yuan, Y.-P., Qiu, L.-G., Jiang, X., Xie, A.-J., Shen, Y.-H., & Zhu, J.-F. (2012) · Dalton Transactions · doi:10.1039/c2dt12474b · Cited by 628
The enhancement of photodegradation efficiency using Pt–TiO2 catalyst
Li, F. B., & Li, X. Z. (2002) · Chemosphere · doi:10.1016/s0045-6535(02)00201-1 · Cited by 589
TiO2–g-C3N4 composite materials for photocatalytic H2 evolution under visible light irradiation
Yan, H., & Yang, H. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.09.201 · Cited by 588
Yan, S. C., Lv, S. B., Li, Z. S., & Zou, Z. G. (2010) · Dalton Trans. · doi:10.1039/b914110c · Cited by 582
Kamat, P. V. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz201629p · Cited by 543
Heterojunctioned BiOCl/Bi2O3, a new visible light photocatalyst
Chai, S. Y., Kim, Y. J., Jung, M. H., Chakraborty, A. K., Jung, D., & Lee, W. I. (2009) · Journal of Catalysis · doi:10.1016/j.jcat.2008.12.020 · Cited by 493
Wu, L., Yu, J. C., & Fu, X. (2006) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2005.08.047 · Cited by 452
Preparing Articles on Photocatalysis—Beyond the Illusions, Misconceptions, and Speculation
Ohtani, B. (2008) · Chemistry Letters · doi:10.1246/cl.2008.216 · Cited by 445
Yan, H. (2012) · Chemical Communications · doi:10.1039/c2cc00001f · Cited by 409
BiOBr–carbon nitride heterojunctions: synthesis, enhanced activity and photocatalytic mechanism
Fu, J., Tian, Y., Chang, B., Xi, F., & Dong, X. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34778d · Cited by 387
Self-citationNi(OH)2 modified CdS nanorods for highly efficient visible-light-driven photocatalytic H2 generation
Ran, J., Yu, J., & Jaroniec, M. (2011) · Green Chemistry · doi:10.1039/c1gc15465f · Cited by 386
Photoelectrochemistry of cadmium sulfide. 1. Reanalysis of photocorrosion and flat-band potential
Meissner, D., Memming, R., & Kastening, B. (1988) · The Journal of Physical Chemistry · doi:10.1021/j100323a032 · Cited by 375
The Nature of Nitrogen‐Modified Titanium Dioxide Photocatalysts Active in Visible Light
Mitoraj, D., & Kisch, H. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200800304 · Cited by 360
Matsumura, M., Furukawa, S., Saho, Y., & Tsubomura, H. (1985) · The Journal of Physical Chemistry · doi:10.1021/j100254a001 · Cited by 313
Exceptional visible-light-driven photocatalytic activity over BiOBr–ZnFe2O4 heterojunctions
Kong, L., Jiang, Z., Xiao, T., Lu, L., Jones, M. O., & Edwards, P. P. (2011) · Chemical Communications · doi:10.1039/c1cc10446b · Cited by 271
Photocatalytic Activity of a Bi-Based Oxychloride Bi3O4Cl
Lin, X., Huang, T., Huang, F., Wang, W., & Shi, J. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp065373m · Cited by 263
TiO2 Nanostructures: Recent Physical Chemistry Advances
Kamat, P. V. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp305026h · Cited by 249
Xu, X., Liu, G., Randorn, C., & Irvine, J. T. S. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.08.052 · Cited by 236
Silva, L. A., Ryu, S. Y., Choi, J., Choi, W., & Hoffmann, M. R. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp8037279 · Cited by 220
Ke, D., Liu, S., Dai, K., Zhou, J., Zhang, L., & Peng, T. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp903378q · Cited by 159
Photochemical hydrogen production using cadmium sulphide suspensions in aerated water
Darwent, J. R., & Porter, G. (1981) · Journal of the Chemical Society Chemical Communications · doi:10.1039/c39810000145 · Cited by 141
Hybrid nanocomposite with visible–light photocatalytic activity: CdS–pillared titanate
Fu, J., Li, G., Xi, F., & Dong, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.10.098 · Cited by 32
Self-citation
Cited by
Ong, W.-J., Tan, L.-L., Ng, Y. H., Yong, S.-T., & Chai, S.-P. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00075 · Cited by 7,147
Marschall, R. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303214 · Cited by 1,620
Dong, G., Zhang, Y., Pan, Q., & Qiu, J. (2014) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2014.04.002 · Cited by 1,085
Nanostructured materials for photocatalysis
Xu, C., Ravi Anusuyadevi, P., Aymonier, C., Luque, R., & Marre, S. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00102f · Cited by 1,082
Recent advances in photocatalysis for environmental applications
Byrne, C., Subramanian, G., & Pillai, S. C. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2017.07.080 · Cited by 820
Metadata
- Authors
- Fu, J., Chang, B., Tian, Y., Xi, F., & Dong, X.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 9
- Pages
- 3083
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W1963565734
- Cited by
- 526
- References
- 41
- FWCI
- 12.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.