The DOI matches its Crossref record.
Solid-state solar modules based on mesoscopic organometal halide perovskite: a route towards the up-scaling process
Abstract
We fabricated the first solid state modules based on organometal halide perovskite CH3NH3PbI3-xClx using Spiro-OMeTAD and poly(3-hexylthiophene) as hole transport materials. Device up-scaling was performed using innovative procedures to realize large-area cells and the integrated series-interconnections. The perovskite-based modules show a maximum conversion efficiency of 5.1% using both poly(3-hexylthiophene) and Spiro-OMeTAD. A long-term stability test was performed (in air, under AM1.5G, 1 Sun illumination conditions) using both materials showing different behaviour under continuous light stress. Whilst the poly(3-hexylthiophene)-based module efficiency drops by about 80% with respect to the initial value after 170 hours, the Spiro-based module shows a promising long-term stability maintaining more than 60% of its initial efficiency after 335 hours.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Advancements in perovskite solar cells: photophysics behind the photovoltaics
Sum, T. C., & Mathews, N. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00673a · Cited by 778
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Chen, H., Ye, F., Tang, W., He, J., Yin, M., Wang, Y., Xie, F., Bi, E., Yang, X., Grätzel, M., et al. (2017) · Nature · doi:10.1038/nature23877 · Cited by 716
Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Di Giacomo, F., Zardetto, V., D'Epifanio, A., Pescetelli, S., Matteocci, F., Razza, S., Di Carlo, A., Licoccia, S., Kessels, W. M. M., Creatore, M., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401808 · Cited by 595
Self-citationRoy, P., Kumar Sinha, N., Tiwari, S., & Khare, A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.01.080 · Cited by 541
Hailegnaw, B., Kirmayer, S., Edri, E., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00504 · Cited by 523
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
A perspective on the production of dye-sensitized solar modules
Fakharuddin, A., Jose, R., Brown, T. M., Fabregat-Santiago, F., & Bisquert, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01724b · Cited by 447
Self-citationProgress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Self-citationDevice stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
Razza, S., Di Giacomo, F., Matteocci, F., Cinà, L., Palma, A. L., Casaluci, S., Cameron, P., D'Epifanio, A., Licoccia, S., Reale, A., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.008 · Cited by 384
Self-citationMalinauskas, T., Tomkute-Luksiene, D., Sens, R., Daskeviciene, M., Send, R., Wonneberger, H., Jankauskas, V., Bruder, I., & Getautis, V. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5090385 · Cited by 368
Organic–inorganic halide perovskite/crystalline silicon four-terminal tandem solar cells
Löper, P., Moon, S.-J., Martín de Nicolas, S., Niesen, B., Ledinsky, M., Nicolay, S., Bailat, J., Yum, J.-H., De Wolf, S., & Ballif, C. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp03788j · Cited by 367
Encapsulation for long-term stability enhancement of perovskite solar cells
Matteocci, F., Cinà, L., Lamanna, E., Cacovich, S., Divitini, G., Midgley, P. A., Ducati, C., & Di Carlo, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.041 · Cited by 340
Self-citationStable Large‐Area (10 × 10 cm2) Printable Mesoscopic Perovskite Module Exceeding 10% Efficiency
Hu, Y., Si, S., Mei, A., Rong, Y., Liu, H., Li, X., & Han, H. (2017) · Solar RRL · doi:10.1002/solr.201600019 · Cited by 328
Yan, J., & Saunders, B. R. (2014) · RSC Adv. · doi:10.1039/c4ra07064j · Cited by 320
Qiu, L., Ono, L. K., & Qi, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.09.008 · Cited by 286
Pinhole-free perovskite films for efficient solar modules
Qiu, W., Merckx, T., Jaysankar, M., Masse de la Huerta, C., Rakocevic, L., Zhang, W., Paetzold, U. W., Gehlhaar, R., Froyen, L., Poortmans, J., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03703d · Cited by 284
A Review on Scaling Up Perovskite Solar Cells
Li, D., Zhang, D., Lim, K., Hu, Y., Rong, Y., Mei, A., Park, N., & Han, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008621 · Cited by 284
Razza, S., Castro-Hermosa, S., Di Carlo, A., & Brown, T. M. (2016) · APL Materials · doi:10.1063/1.4962478 · Cited by 271
Self-citationFew‐Layer MoS2 Flakes as Active Buffer Layer for Stable Perovskite Solar Cells
Capasso, A., Matteocci, F., Najafi, L., Prato, M., Buha, J., Cinà, L., Pellegrini, V., Carlo, A. D., & Bonaccorso, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600920 · Cited by 259
Self-citationMahmood, K., Swain, B. S., & Amassian, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500568 · Cited by 252
Kosasih, F. U., & Ducati, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.02.055 · Cited by 86
Metadata
- Authors
- Matteocci, F., Razza, S., Di Giacomo, F., Casaluci, S., Mincuzzi, G., Brown, T. M., D'Epifanio, A., Licoccia, S., & Di Carlo, A.
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 16
- Issue
- 9
- Pages
- 3918
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2009244270
- Cited by
- 182
- References
- 0
- FWCI
- 15.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.