The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
High temperature sodium batteries: status, challenges and future trends
Abstract
The progress in the research and development of high temperature sodium batteries suggests that all-solid-state batteries with inorganic or polymer solid electrolytes are promising power sources for a wide range of applications due to their high thermal stability, reliability, long-cycle life and versatile geometries. The electrolytes play a fundamental role in terms of current (power) density, the time stability, and the safety of batteries and, as a result, their continuous improvement and innovation are indeed critical to success. In fact, inorganic solid electrolytes pave the way for improving the cost-effective development of rechargeable sodium batteries. This review describes a state-of-the-art overview of most of the Na+ conductors for use as electrolytes in sodium/sulphur and ZEBRA batteries. The emphasis of this article is on inorganic solid electrolytes, especially, ceramic and glass-ceramic electrolytes as promising alternatives applicable to all solid-state batteries. As part of a continuous effort to find new materials that operate at room temperature and moderate temperatures, NASICON electrolytes will also be considered. Polymer electrolytes based on poly(ethylene oxide) (PEO) are also very suitable for all solid-state batteries. Hence, the review focuses on ion transport based on the observed conductivity, electrolyte preparation, safety and environmental impact.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Self-citationThackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
Sodium and sodium-ion energy storage batteries
Ellis, B. L., & Nazar, L. F. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2012.04.002 · Cited by 1,460
Toward innovations of gas sensor technology
Yamazoe, N. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2004.12.075 · Cited by 1,166
Lithium Ionic Conductor Thio-LISICON: The Li[sub 2]S-GeS[sub 2]-P[sub 2]S[sub 5] System
Kanno, R., & Murayama, M. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379028 · Cited by 1,066
Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries
Hayashi, A., Noi, K., Sakuda, A., & Tatsumisago, M. (2012) · Nature Communications · doi:10.1038/ncomms1843 · Cited by 1,060
Advanced materials for sodium-beta alumina batteries: Status, challenges and perspectives
Lu, X., Xia, G., Lemmon, J. P., & Yang, Z. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.120 · Cited by 600
Preparation of Li 2 S–P 2 S 5 Amorphous Solid Electrolytes by Mechanical Milling
Hayashi, A., Hama, S., Morimoto, H., Tatsumisago, M., & Minami, T. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb00685.x · Cited by 478
Performance of batteries for electric vehicles on short and longer term
Gerssen-Gondelach, S. J., & Faaij, A. P. C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.085 · Cited by 359
Development of Sodium‐Sulfur Batteries
Oshima, T., Kajita, M., & Okuno, A. (2004) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2004.tb00179.x · Cited by 351
Dustmann, C.-H. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.039 · Cited by 336
The sodium/nickel chloride (ZEBRA) battery
Sudworth, J. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00891-6 · Cited by 323
Live Scanning Electron Microscope Observations of Dendritic Growth in Lithium/Polymer Cells
Dollé, M., Sannier, L., Beaudoin, B., Trentin, M., & Tarascon, J.-M. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1519970 · Cited by 278
Status of life cycle inventories for batteries
Sullivan, J. L., & Gaines, L. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.01.001 · Cited by 218
Ionic conduction in the solid state
Kumar, P. P., & Yashonath, S. (2006) · Journal of Chemical Sciences · doi:10.1007/bf02708775 · Cited by 214
Membranes in Lithium Ion Batteries
Yang, M., & Hou, J. (2012) · Membranes · doi:10.3390/membranes2030367 · Cited by 197
Material design of new lithium ionic conductor, thio-LISICON, in the Li2S?P2S5 system
Murayama, M., Sonoyama, N., Yamada, A., & Kanno, R. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.02.025 · Cited by 188
Advanced intermediate-temperature Na–S battery
Lu, X., Kirby, B. W., Xu, W., Li, G., Kim, J. Y., Lemmon, J. P., Sprenkle, V. L., & Yang, Z. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23606k · Cited by 187
Discharge properties of all-solid sodium–sulfur battery using poly (ethylene oxide) electrolyte
Park, C.-W., Ryu, H.-S., Kim, K.-W., Ahn, J.-H., Lee, J.-Y., & Ahn, H.-J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.11.083 · Cited by 159
Solid-state lithium battery with graphite anode
Takada, K., Inada, T., Kajiyama, A., Sasaki, H., Kondo, S., Watanabe, M., Murayama, M., & Kanno, R. (2003) · Solid State Ionics · doi:10.1016/s0167-2738(02)00823-8 · Cited by 150
The short-term cycling properties of Na/PVdF/S battery at ambient temperature
Kim, J.-S., Ahn, H., Kim, I., et al. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-008-0504-8 · Cited by 81
Crystal chemistry and ion conductivity of the Na1 + xTi2 − xAlx(PO4)3 (0 ≤ x ≤ 0.9) NASICON series
Mouahid, F. E., Bettach, M., Zahir, M., Manso, M. P. M., Bruque, S., Losilla, E. R., & Aranda, M. Á. G. (2000) · Journal of Materials Chemistry · doi:10.1039/b004837m · Cited by 63
Sodium Mobility in the NASICON Series Na1+xZr2-xInx(PO4)3
Losilla, E. R., Aranda, M. Á. G., Bruque, S., Sanz, J., París, M. A., Campo, J., & West, A. R. (2000) · Chemistry of Materials · doi:10.1021/cm000122q · Cited by 63
Reality and Future of Rechargeable Lithium Batteries
Tao, H., Feng, Z., Liu, H., et al. (2011) · The Open Materials Science Journal · doi:10.2174/1874088x01105010204 · Cited by 49
New glass-ceramic sealants for Na/S battery
Song, S., Wen, Z., Liu, Y., et al. (2010) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-010-1028-6 · Cited by 22
Onishi, T. (2012) · International Journal of Quantum Chemistry · doi:10.1002/qua.24217 · Cited by 11
Cited by
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Gür, T. M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01419a · Cited by 2,566
Rechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries
Han, M. H., Gonzalo, E., Singh, G., & Rojo, T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03192j · Cited by 1,380
Self-citationNew horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Self-citation
Metadata
- Authors
- Hueso, K. B., Armand, M., & Rojo, T.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 3
- Pages
- 734
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2118626622
- Cited by
- 774
- References
- 33
- FWCI
- 29.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.