The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Enhancing SOFC cathode performance by surface modification through infiltration
Abstract
Solid oxide fuel cells (SOFCs) have the potential to be one of the cleanest and most efficient energy technologies for direct conversion of chemical fuels to electricity. Economically competitive SOFC systems appear poised for commercialization, but widespread market penetration will require continuous innovation of materials and fabrication processes to enhance system lifetime and reduce cost. One early technical opportunity is minimization of resistance to the oxygen reduction reaction (ORR) at the cathode, which contributes the most to performance degradation and efficiency loss in the existing SOFCs, especially at temperatures <700 °C. Detailed study over the past 15 years has revealed the positive impact of catalyst infiltration on SOFC cathode performance, both in power density and durability metrics. However, realizable performance improvements rely upon strongly-coupled relationships in materials and morphology between the infiltrate and the backbone, and therefore efficacious systems cannot be simply generated with a set of simple heuristics. This article reviews recent progress in enhancing SOFC cathode performance by surface modification through a solution-based infiltration process, focusing on two backbone architectures – inherently functional and skeletal – infiltrated using wet-chemistry processes. An efficient cathode consists of a porous mixed-conducting backbone and an active coating catalyst; the porous backbone provides excellent ionic and electronic conductivity, while the infiltrated surface coating possesses high catalytic activity and stability. As available, performance comparisons are emphasized and reaction schematics for specific infiltrate/backbone systems are summarized. While significant progress has been achieved in enhancing surface catalytic activity and durability, the detailed mechanisms of performance enhancement are insufficiently understood to obtain critical insights and a scientific basis for rational design of more efficient catalysts and novel electrode architectures. Recent progress in characterization of surfaces and interfaces is briefly discussed with challenges and perspectives in surface modification of SOFC electrodes. Surface modification through infiltration is expected to play an increasingly important role in current and next-generation commercial SOFC development, and this review illustrates the sophisticated technical considerations required to inform judicious selection of an infiltrate for a given SOFC system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Minh, N. Q. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb03645.x · Cited by 3,839
Catalytic Properties of Ceria and CeO2-Containing Materials
TROVARELLI, A. (1996) · Catalysis Reviews · doi:10.1080/01614949608006464 · Cited by 3,495
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
Lowering the Temperature of Solid Oxide Fuel Cells
Wachsman, E. D., & Lee, K. T. (2011) · Science · doi:10.1126/science.1204090 · Cited by 2,554
Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
Adler, S. B. (2004) · Chemical Reviews · doi:10.1021/cr020724o · Cited by 2,316
Materials for Solid Oxide Fuel Cells
Jacobson, A. J. (2010) · Chemistry of Materials · doi:10.1021/cm902640j · Cited by 1,366
Yang, L., Wang, S., Blinn, K., Liu, M., Liu, Z., Cheng, Z., & Liu, M. (2009) · Science · doi:10.1126/science.1174811 · Cited by 1,225
Self-citationCathode materials for solid oxide fuel cells: a review
Sun, C., Hui, R., & Roller, J. (2010) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-009-0932-0 · Cited by 1,207
Solid oxide fuel cells for stationary, mobile, and military applications
Singhal, S. C. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00349-1 · Cited by 837
Structure and electrical properties of La1−xSrxCo1−yFeyO3. Part 1. The system La0.8Sr0.2Co1−yFeyO3
Tai, L. (1995) · Solid State Ionics · doi:10.1016/0167-2738(94)00244-m · Cited by 802
Ambient pressure photoelectron spectroscopy: A new tool for surface science and nanotechnology
SALMERON, M., & SCHLOGL, R. (2008) · Surface Science Reports · doi:10.1016/j.surfrep.2008.01.001 · Cited by 784
Prediction of solid oxide fuel cell cathode activity with first-principles descriptors
Lee, Y.-L., Kleis, J., Rossmeisl, J., Shao-Horn, Y., & Morgan, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02032c · Cited by 659
Kim, G., Wang, S., Jacobson, A. J., Reimus, L., Brodersen, P., & Mims, C. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b618345j · Cited by 588
Fundamental mechanisms limiting solid oxide fuel cell durability
Yokokawa, H., Tu, H., Iwanschitz, B., & Mai, A. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.016 · Cited by 561
Jiang, S. P. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.09.067 · Cited by 549
Electrode materials and reaction mechanisms in solid oxide fuel cells: a brief review
Tsipis, E. V., & Kharton, V. V. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-008-0611-6 · Cited by 490
Virkar, A. N. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00633-0 · Cited by 472
Steele, B. C. H. (2001) · Journal of Materials Science · doi:10.1023/a:1004853019349 · Cited by 468
Impedance spectroscopic study on well-defined (La,Sr)(Co,Fe)O3−δ model electrodes
BAUMANN, F., Fleig, J., Habermeier, H. ‐., & Maier, J. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.02.045 · Cited by 461
Oxygen transport in selected nonstoichiometric perovskite-structure oxides
Carter, S. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90435-r · Cited by 446
Fleig, J. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022802.093258 · Cited by 444
Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells
Mai, A., Haanappel, V. A. C., Uhlenbruck, S., Tietz, F., & Stöver, D. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.03.009 · Cited by 438
Martin, D., & Duprez, D. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9531568 · Cited by 402
Structural instability of cubic perovskite BaxSr1−xCo1−yFeyO3−δ
SVARCOVA, S. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2007.11.031 · Cited by 399
Crumlin, E. J., Mutoro, E., Liu, Z., Grass, M. E., Biegalski, M. D., Lee, Y.-L., Morgan, D., Christen, H. M., Bluhm, H., & Shao-Horn, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03397f · Cited by 375
Materials for IT-SOFC stacks 35 years R&D: the inevitability of gradualness?
Steele, B. C. H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00709-8 · Cited by 367
Degradation Mechanisms of La–Sr–Co–Fe–O[sub 3] SOFC Cathodes
Simner, S. P., Anderson, M. D., Engelhard, M., & Stevenson, J. W. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2266160 · Cited by 363
Chen, D., Ran, R., Zhang, K., Wang, J., & Shao, Z. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.045 · Cited by 358
La2Zr2O7 formation and oxygen reduction kinetics of the La0.85Sr0.15MnyO3, O2(g)|YSZ system
Mitterdorfer, A. (1998) · Solid State Ionics · doi:10.1016/s0167-2738(98)00195-7 · Cited by 351
Yang, L., Choi, Y., Qin, W., Chen, H., Blinn, K., Liu, M., Liu, P., Bai, J., Tyson, T. A., & Liu, M. (2011) · Nature Communications · doi:10.1038/ncomms1359 · Cited by 334
Self-citationRational SOFC material design: new advances and tools
Liu, M., Lynch, M. E., Blinn, K., Alamgir, F. M., & Choi, Y. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70279-6 · Cited by 327
Self-citationDevelopment of lanthanum ferrite SOFC cathodes
Simner, S. P., Bonnett, J. F., Canfield, N. L., Meinhardt, K., Shelton, J. P., Sprenkle, V., & Stevenson, J. W. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00455-x · Cited by 310
Zhang, C., Grass, M. E., McDaniel, A. H., DeCaluwe, S. C., Gabaly, F. E., Liu, Z., McCarty, K. F., Farrow, R. L., Linne, M. A., Hussain, Z., et al. (2010) · Nature Materials · doi:10.1038/nmat2851 · Cited by 292
Bismuth oxide-based solid electrolytes for fuel cells
Azad, A. M., Larose, S., & Akbar, S. A. (1994) · Journal of Materials Science · doi:10.1007/bf00414192 · Cited by 263
Manganite-zirconia composite cathodes for SOFC: Influence of structure and composition
Østergård, M. J. L., Clausen, C., Bagger, C., & Mogensen, M. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(94)00332-u · Cited by 256
Photoelectron spectroscopy under ambient pressure and temperature conditions
Ogletree, D. F., Bluhm, H., Hebenstreit, E. D., et al. (2009) · Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment · doi:10.1016/j.nima.2008.12.155 · Cited by 255
Suppression of Sr surface segregation in La1−xSrxCo1−yFeyO3−δ: a first principles study
Ding, H., Virkar, A. V., Liu, M., & Liu, F. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp43148c · Cited by 222
Self-citationChoi, Y., Abernathy, H., Chen, H., Lin, M. C., & Liu, M. (2006) · ChemPhysChem · doi:10.1002/cphc.200600190 · Cited by 218
Self-citationElectrode materials and reaction mechanisms in solid oxide fuel cells: a brief review
Tsipis, E. V., & Kharton, V. V. (2007) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-007-0468-0 · Cited by 197
The Role of the Liquid‐Solid Interface in the Preparation of Supported Catalysts
Bourikas, K., Kordulis, C., & Lycourghiotis, A. (2006) · Catalysis Reviews · doi:10.1080/01614940600962321 · Cited by 196
Lynch, M. E., Yang, L., Qin, W., Choi, J.-J., Liu, M., Blinn, K., & Liu, M. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01188j · Cited by 191
Self-citationStabilizing Nanostructured Solid Oxide Fuel Cell Cathode with Atomic Layer Deposition
Gong, Y., Palacio, D., Song, X., Patel, R. L., Liang, X., Zhao, X., Goodenough, J. B., & Huang, K. (2013) · Nano Letters · doi:10.1021/nl402138w · Cited by 179
Time-dependent performance of mixed-conducting SOFC cathodes
Mai, A., BECKER, M., Assenmacher, W., Tietz, F., Hathiramani, D., Ivers‐Tiffée, E., STOVER, D., & Mader, W. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.06.021 · Cited by 170
Liu, Z., Liu, B., Ding, D., Liu, M., Chen, F., & Xia, C. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.025 · Cited by 158
Self-citationPd-promoted La0.6Sr0.4Co0.2Fe0.8O3 cathodes
Sahibzada, M. (1998) · Solid State Ionics · doi:10.1016/s0167-2738(98)00294-x · Cited by 155
la O’, G. J., Ahn, S.-J., Crumlin, E. J., Orikasa, Y., Biegalski, M. D., Christen, H. M., & Shao‐Horn, Y. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201001922 · Cited by 149
Oxygen Reduction Kinetics Enhancement on a Heterostructured Oxide Surface for Solid Oxide Fuel Cells
Crumlin, E. J., Mutoro, E., Ahn, S.-J., la O’, G. J., Leonard, D. N., Borisevich, A. Y., Biegalski, M. D., Christen, H. M., & Shao‐Horn, Y. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz101217d · Cited by 149
The control of platinum impregnation by PZC alteration of oxides and carbon
Hao, X., Quach, L., Korah, J., Spieker, W. A., & Regalbuto, J. R. (2004) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2004.04.026 · Cited by 121
Han, J. W., & Yildiz, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03592h · Cited by 119
Choi, Y., Lin, M. C., & Liu, M. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200700411 · Cited by 113
Self-citationHaanappel, V. A. C., Rutenbeck, D., Mai, A., Uhlenbruck, S., Sebold, D., Wesemeyer, H., Röwekamp, B., Tropartz, C., & Tietz, F. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.11.046 · Cited by 107
Interfacial reaction and electrochemical properties of dense (La,Sr) CoO3−δ cathode on YSZ (1 0 0)
Sase, M., Ueno, D., Yashiro, K., Kaimai, A., Kawada, ., & Mizusaki, J. (2004) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2004.06.057 · Cited by 104
Application of LaNi(Fe)O[sub 3] as SOFC Cathode
Orui, H., Watanabe, K., Chiba, R., & Arakawa, M. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1779628 · Cited by 100
Kim, J. Y., Sprenkle, V., Canfield, N. L., Meinhardt, K., & Chick, L. A. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2181435 · Cited by 68
Ren, Y., Küngas, R., Gorte, R. J., & Deng, C. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.02.028 · Cited by 58
Liu, Y., Mori, M., Funahashi, Y., Fujishiro, Y., & Hirano, A. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.05.003 · Cited by 57
BaCe1-xPdxO3-δ (0 ≤ x ≤ 0.1): Redox Controlled Ingress and Egress of Palladium in a Perovskite
Li, J., Singh, U. G., Bennett, J. W., Page, K. L., Weaver, J. C., Zhang, J., Proffen, T. E., Rappe, A. M., Scott, S. L., & Seshadri, R. (2007) · Chemistry of Materials · doi:10.1021/cm062500i · Cited by 52
Kiebach, R., Knöfel, C., Bozza, F., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.070 · Cited by 51
Ricote, S., Bonanos, N., Rørvik, P. M., & Haavik, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.090 · Cited by 48
Tamm, K., Küngas, R., Gorte, R. J., & Lust, E. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.05.127 · Cited by 42
Cited by
Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers
Irvine, J. T. S., Neagu, D., Verbraeken, M. C., Chatzichristodoulou, C., Graves, C., & Mogensen, M. B. (2016) · Nature Energy · doi:10.1038/nenergy.2015.14 · Cited by 769
Proton-conducting oxides for energy conversion and storage
Duan, C., Huang, J., Sullivan, N., & O'Hayre, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5135319 · Cited by 530
Recent Advances in Intensified Ethylene Production—A Review
Gao, Y., Neal, L., Ding, D., Wu, W., Baroi, C., Gaffney, A. M., & Li, F. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b02922 · Cited by 511
Self-citationFan, L., Zhu, B., Su, P.-C., & He, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.044 · Cited by 501
Water Electrolysis toward Elevated Temperature: Advances, Challenges and Frontiers
Zhang, W., Liu, M., Gu, X., Shi, Y., Deng, Z., & Cai, N. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00573 · Cited by 441
Self-citation
Metadata
- Authors
- Ding, D., Li, X., Lai, S. Y., Gerdes, K., & Liu, M.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 2
- Pages
- 552
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1990791775
- Cited by
- 882
- References
- 61
- FWCI
- 21.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.