The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
A distributed activation energy model for the pyrolysis of lignocellulosic biomass
Abstract
The pyrolysis kinetics of xylan, cellulose, and eight lignocellulosic biomass samples (including corn stover, cotton stalk, palm oil husk, pine wood, red oak, sugarcane bagasse, switchgrass, and wheat straw) were measured in a TA SDT Q600 thermogravimetric analyzer. The kinetic data of xylan and cellulose were fitted to a distributed activation energy model (DAEM) where the activation energies for the pyrolysis of each reactant followed a Gaussian distribution. The activation energy distribution peaks were centered at 178.3 and 210.0 kJ mol−1 for xylan and cellulose respectively. The standard deviations of the activation energy distributions for xylan and cellulose were 5.85 and 0.94 kJ mol−1. A three-parallel-DAEM-reaction model was used to fit the pyrolysis kinetics of the lignocellulosic biomass feedstocks. The model assumes that biomass contains three independent reacting pseudo-components all of which have a Gaussian distribution for their activation energies. The first, second and third pseudo-components represent the fractions of hemicellulose, cellulose and lignin, respectively. The activation energy distribution peaks for the three pseudo-components were centered at 169.7–186.8, 204.2–212.5, and 237.1–266.6 kJ mol−1 for the different biomass feedstocks. The standard deviations of the activation energies were 4.6–8.8, 0.7–1.8, and 26.5–41.8 kJ mol−1 for the hemicellulose, cellulose and lignin fractions respectively. This indicates that the activation energy distribution for lignin has the widest distribution, and cellulose has the narrowest distribution. The biomass compositions obtained by the fitting of the pyrolysis kinetics agreed well with published values obtained from wet chemical analysis techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
Self-citationPyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Energy production from biomass (part 2): conversion technologies
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00119-5 · Cited by 2,042
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
White, J. E., Catallo, W. J., & Legendre, B. L. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.01.004 · Cited by 1,232
Techno-economic analysis of biomass fast pyrolysis to transportation fuels
Wright, M. M., Daugaard, D. E., Satrio, J. A., & Brown, R. C. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.029 · Cited by 814
Pyrolysis kinetics of lignocellulosic materials—three independent reactions model
Orfão, J. J. M., Antunes, F. J. A., & Figueiredo, J. L. (1999) · Fuel · doi:10.1016/s0016-2361(98)00156-2 · Cited by 771
Kinetics and Mechanism of Cellulose Pyrolysis
Lin, Y.-C., Cho, J., Tompsett, G. A., Westmoreland, P. R., & Huber, G. W. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp906702p · Cited by 698
Self-citation
Cited by
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Self-citationLignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Review of physicochemical properties and analytical characterization of lignocellulosic biomass
Cai, J., He, Y., Yu, X., Banks, S. W., Yang, Y., Zhang, X., Yu, Y., Liu, R., & Bridgwater, A. V. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.072 · Cited by 765
Self-citationReaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
Ferrini, P., & Rinaldi, R. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403747 · Cited by 431
Metadata
- Authors
- Cai, J., Wu, W., Liu, R., & Huber, G. W.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 5
- Pages
- 1331
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W2160941405
- Cited by
- 282
- References
- 65
- FWCI
- 10.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A distributed activation energy model for the pyrolysis of lignocellulosic biomass. https://app.cochat.ai/papers/10.1039/c3gc36958g
- The paper
- Cai, J., Wu, W., Liu, R., & Huber, G. W. (2013). A distributed activation energy model for the pyrolysis of lignocellulosic biomass. Green Chemistry. https://doi.org/10.1039/c3gc36958g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.