The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Efficient and stable CH3NH3PbI3-sensitized ZnO nanorod array solid-state solar cells
Open accessAbstract
We report for the first time the use of a perovskite (CH3NH3PbI3) absorber in combination with ZnO nanorod arrays (NRAs) for solar cell applications. The perovskite material has a higher absorption coefficient than molecular dye sensitizers, gives better solar cell stability, and is therefore more suited as a sensitizer for ZnO NRAs. A solar cell efficiency of 5.0% was achieved under 1000 W m(-2) AM 1.5 G illumination for a solar cell with the structure: ZnO NRA/CH3NH3PbI3/spiro-MeOTAD/Ag. Moreover, the solar cell shows a good long-term stability. Using transient photocurrent and photovoltage measurements it was found that the electron transport time and lifetime vary with the ZnO nanorod length, a trend which is similar to that in dye-sensitized solar cells, DSCs, suggesting a similar charge transfer process in ZnO NRA/CH3NH3PbI3 solar cells as in conventional DSCs. Compared to CH3NH3PbI3/TiO2 solar cells, ZnO shows a lower performance due to more recombination losses.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Hagfeldt, A., Boschloo, G., Sun, L., Kloo, L., & Pettersson, H. (2010) · Chemical Reviews · doi:10.1021/cr900356p · Cited by 8,931
Self-citationKim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Yella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Nanowire dye-sensitized solar cells
Law, M., Greene, L. E., Johnson, J. C., Saykally, R., & Yang, P. (2005) · Nature Materials · doi:10.1038/nmat1387 · Cited by 5,332
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Low‐Temperature Wafer‐Scale Production of ZnO Nanowire Arrays
Greene, L. E., Law, M., Goldberger, J., Kim, F., Johnson, J. C., Zhang, Y., Saykally, R. J., & Yang, P. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200351461 · Cited by 1,677
High Efficiency of Dye-Sensitized Solar Cells Based on Metal-Free Indoline Dyes
Horiuchi, T., Miura, H., Sumioka, K., & Uchida, S. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0488277 · Cited by 1,219
Feldt, S. M., Gibson, E. A., Gabrielsson, E., Sun, L., Boschloo, G., & Hagfeldt, A. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1088869 · Cited by 1,065
Self-citationElectrons in nanostructured TiO2 solar cells: transport, recombination and photovoltaic properties
J. Frank, A., Kopidakis, N., & Lagemaat, J. V. D. (2004) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2004.03.015 · Cited by 824
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
ZnO-Based Dye-Sensitized Solar Cells
Anta, J. A., Guillén, E., & Tena-Zaera, R. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3010025 · Cited by 584
Ravirajan, P., Peiró, A. M., Nazeeruddin, M. K., Graetzel, M., Bradley, D. D. C., Durrant, J. R., & Nelson, J. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0571372 · Cited by 547
Quintana, M., Edvinsson, T., Hagfeldt, A., & Boschloo, G. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp065948f · Cited by 529
Self-citationGaloppini, E., Rochford, J., Chen, H., Saraf, G., Lu, Y., Hagfeldt, A., & Boschloo, G. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp062865q · Cited by 429
Self-citationEfficiency improvement in solid-state-dye-sensitized photovoltaics with an amphiphilic Ruthenium-dye
Schmidt-Mende, L., Zakeeruddin, S. M., & Grätzel, M. (2005) · Applied Physics Letters · doi:10.1063/1.1844032 · Cited by 215
High-Efficiency Solid-State Dye-Sensitized Solar Cells Based on TiO2-Coated ZnO Nanowire Arrays
Xu, C., Wu, J., Desai, U. V., & Gao, D. (2012) · Nano Letters · doi:10.1021/nl3004144 · Cited by 186
Docampo, P., Hey, A., Guldin, S., et al. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201223 · Cited by 83
Cited by
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
Chen, Q., De Marco, N., Yang, Y. (., Song, T.-B., Chen, C.-C., Zhao, H., Hong, Z., Zhou, H., & Yang, Y. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.009 · Cited by 1,154
ZnO nanostructured materials and their potential applications: progress, challenges and perspectives
Raha, S., & Ahmaruzzaman, M. (2022) · Nanoscale Advances · doi:10.1039/d1na00880c · Cited by 1,107
Hole‐Transport Materials for Perovskite Solar Cells
Calió, L., Kazim, S., Grätzel, M., & Ahmad, S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201601757 · Cited by 1,004
Metadata
- Authors
- Bi, D., Boschloo, G., Schwarzmüller, S., Yang, L., Johansson, E. M. J., & Hagfeldt, A.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 5
- Issue
- 23
- Pages
- 11686
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2168557397
- Cited by
- 281
- References
- 20
- FWCI
- 26.36
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.