Fully bio-based poly(l-lactide)-b-poly(ricinoleic acid)-b-poly(l-lactide) triblock copolyesters: investigation of solid-state morphology and thermo-mechanical properties
The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
In this work, a set of ABA triblock poly(L-lactide)-b-poly(ricinoleic acid)-b-poly(L-lactide) aliphatic copolyesters were prepared by consecutive AB type self-condensation and ring-opening polymerization. Condensation of methyl ricinoleate, produced from castor oil, in the presence of a small amount of 1,3-propanediol afforded α,ω-hydroxy-terminated poly(ricinoleic acid) with a molar mass of 11 kg mol−1. Polymerization of L-lactide initiated from the terminal hydroxyl moieties of the α,ω-hydroxy-terminated poly(ricinoleic acid) led to triblock copolymers with a composition ranging from 35 to 83 wt% of PLLA. The block structure was confirmed by several techniques. The copolymers displayed a multi-step thermal degradation with a temperature corresponding to 5 wt% loss in the range 175–225 °C. DSC analyses showed that the PRic block had a moderate effect on PLLA melting behavior. The solid-state morphology of the so-formed copolymers was highly dependent on their chemical composition, as evidenced by SAXS and WAXD analyses. The high degree of separation of hard and soft phases was also confirmed by dynamic mechanical analysis as seen from the distinct α-relaxations. Finally, the tensile properties of these block copolymers ranged from thermoplastic to elastomeric depending on their composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Compostability of bioplastic packaging materials: An overview
Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S. E., & Singh, S. P. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600168 · Cited by 618
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Synthesis of Poly(lactide)s with Modified Thermal and Mechanical Properties
Becker, J. M., Pounder, R. J., & Dove, A. P. (2010) · Macromolecular Rapid Communications · doi:10.1002/marc.201000088 · Cited by 146
Maglio, G., Migliozzi, A., & Palumbo, R. (2003) · Polymer · doi:10.1016/s0032-3861(02)00764-4 · Cited by 111
Shin, D., Shin, K., Aamer, K. A., Tew, G. N., Russell, T. P., Lee, J. H., & Jho, J. Y. (2005) · Macromolecules · doi:10.1021/ma0481712 · Cited by 99
Cited by
Bio-based polyesters: Recent progress and future prospects
Zhang, Q., Song, M., Xu, Y., Wang, W., Wang, Z., & Zhang, L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101430 · Cited by 433
Structure–properties relationship of fatty acid-based thermoplastics as synthetic polymer mimics
Maisonneuve, L., Lebarbé, T., Grau, E., & Cramail, H. (2013) · Polymer Chemistry · doi:10.1039/c3py00791j · Cited by 220
Self-citationHuang, Y., Chang, R., Han, L., Shan, G., Bao, Y., & Pan, P. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00855 · Cited by 87
Metadata
- Authors
- Lebarbé, T., Ibarboure, E., Gadenne, B., Alfos, C., & Cramail, H.
- Venue
- Polymer Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 4
- Issue
- 11
- Pages
- 3357
- ISSN
- 1759-9954 (ISSN-L)
- 1759-9962
- OpenAlex
- W2128645902
- Cited by
- 56
- References
- 19
- FWCI
- 2.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.