CoChat

Synthesis of PLLA-b-PCL-b-PLLA linear tri-block copolymers and their corresponding poly(ester-urethane)s: effect of the molecular weight on their crystallisation and mechanical properties

Navarro-Baena, Ivan, Marcos-Fernández, Angel, Fernández-Torres, Alberto, Kenny, José M., Peponi, Laura · 2014 · RSC Advances

The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index; 3 of the 9 sources its claims cite were checked for support.

Abstract

With the general objective to design polymer based materials with specific thermal and mechanical properties, a systematic study on the crystallinity and the mechanical properties of synthesized linear tri-block copolymers based on poly(L-lactic acid) and poly(ε-caprolactone) and of their corresponding poly(ester-urethane)s has been performed. In particular, eleven tri-block copolymers were synthesized varying both the molecular weight of the blocks as well as the relative content of each block in the copolymer, focusing the attention on the relationship between their chemical compositions and their tailored final properties in order to tune them taking into account their possible applications (i.e. as shape memory materials). From them, eleven poly(ester-urethane)s were synthesized by condensation with hexamethylene diisocyanate (HDI). The chemical composition of the synthesized polymers was studied and correlated with their thermal and crystalline properties obtained by both dynamic scanning calorimetry (DSC) and small angle X-ray diffraction (SAXS) experiments. The relationship between their crystalline structure, thermal and mechanical properties with the molecular weight as well as with the relative content of each comonomer in the copolymers and the amount of HDI in the poly(ester-urethane) was analysed. The results obtained demonstrate that these bio tri-block copolymers and the corresponding poly(ester-urethane)s can be tailored with interesting crystalline and mechanical properties. Future applications as shape memory systems are thus envisaged.

Overview

CoChat Summary

TL;DR

Eleven PLLA-b-PCL-b-PLLA tri-block copolymers and their HDI-derived poly(ester-urethane)s were synthesized and characterized to relate block molecular weight/composition to crystallization and mechanical behavior. The tri-blocks and PUs can be tailored over a range of thermal and mechanical properties, with potential use as shape-memory materials.

Key findings

  • PCL crystallinity in the tri-blocks is strongly affected by PLLA: with amorphous PLLA, PCL crystallinity is around 50%, but crystalline PLLA reduces PCL crystallinity and melting point, eventually suppressing PCL crystallization in some compositions (e.g., T11).
  • PLLA crystallinity in the tri-blocks depends mainly on PLLA block length, not on PCL; PLLA reaches approximately 165 °C Tm and about 55% maximum crystallinity, similar to PCL-PLLA di-block copolymers.
  • Poly(ester-urethane)s are less crystalline than their tri-block precursors because urethane linkages and hydrogen bonds restrict chain mobility; PLLA crystallinity is negligible in PUs based on PCL 2000 and PCL 4000, while PUs based on PCL 8000 crystallize more significantly.
  • Mechanical behavior tracks crystallinity: PUs with amorphous PLLA show high elongation at break (e.g., PU2 1631 ± 127%, PU3 2020 ± 80%), while increasing PLLA crystallinity makes materials stiffer and more brittle (e.g., PU4 elongation 25 ± 4%, PU7 30 ± 5%).

Methods

  • Eleven PLLA-b-PCL-b-PLLA tri-blocks were synthesized by ring-opening polymerization of L-lactide from three commercial PCL diols (nominal 2000, 4000, and 8000 g/mol) using Sn(Oct)2, in bulk at 180 °C for 3 h.
  • Eleven poly(ester-urethane)s were made by polycondensation of the tri-blocks with hexamethylene diisocyanate (HDI) at 1:1 molar ratio in dichloroethane at 80 °C for 5 h.
  • Characterization included 1H NMR, MALDI-TOF/GPC, FT-IR, DSC, SAXS, and tensile tests; DSC and SAXS were used to correlate composition and molecular weight with crystallization, thermal transitions, and mechanical properties.

Limitations

  • The paper states that precise stoichiometry for the polycondensation was difficult to define because 1H NMR molecular-weight calculation of the initial tri-block is inaccurate at high molecular weights; this can affect final PU molecular weight and mechanical properties.
  • The paper states that PU11 could not be tested mechanically due to high fragility.
  • The text makes evident that SAXS comparison may be affected by different sample processing: tri-blocks were melted and cooled in DSC pans, while poly(ester-urethane)s were wrapped in aluminum foil without further thermal treatment before SAXS.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1039/c3ra44786c

Cites

34 of 34 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

3 Valid · 1 Not valid · 4 Not checked · 79 Own results and interpretations

40 more claims

Create a free account to see all 87 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 34
  • Probably not a substantial claim. 10
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

5 of 5

Citations

Cites

Show all 34 references

Research works printed but not linked: 2

  1. Langer, 1998, Nature, 392, 5
  2. Lu, 2008, J. Mater. Sci.: Mater. Med., 19, 395

Cited by

See all 43

Metadata

Authors
Navarro-Baena, I., Marcos-Fernández, A., Fernández-Torres, A., Kenny, J. M., & Peponi, L.
Affiliations
Consejo Superior de Investigaciones Científicas (ES)
Corresponding author
Peponi, Laura
Venue
RSC Advances
Published
2014
Volume
4
Issue
17
Pages
8510
ISSN
2046-2069 (ISSN-L)
OpenAlex
W2083234147
Cited by
43
References
34
Citations by year
2026: 1 · 2025: 3 · 2024: 3 · 2023: 1 · 2021: 3 · 2020: 3 · 2019: 1 · 2018: 4 · 2017: 10 · 2016: 4 · 2015: 5 · 2014: 5
FWCI
3.02
Type
journal article
Language
en
Open access
closed
Locations
  • RSC Advances (publishedVersion)
  • DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion)
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
Keywords
poly(L-lactic acid), polycaprolactone, mechanical properties, molecular weight effects, block composition, hexamethylene diisocyanate, shape memory materials, bio-based polymers, thermal properties

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Synthesis of PLLA-b-PCL-b-PLLA linear tri-block copolymers and their corresponding poly(ester-urethane)s: effect of the molecular weight on their crystallisation and mechanical properties. https://app.cochat.ai/papers/10.1039/c3ra44786c
The paper
Navarro-Baena, I., Marcos-Fernández, A., Fernández-Torres, A., Kenny, J. M., & Peponi, L. (2014). Synthesis of PLLA-b-PCL-b-PLLA linear tri-block copolymers and their corresponding poly(ester-urethane)s: effect of the molecular weight on their crystallisation and mechanical properties. RSC Advances. https://doi.org/10.1039/c3ra44786c

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.