Synthesis of PLLA-b-PCL-b-PLLA linear tri-block copolymers and their corresponding poly(ester-urethane)s: effect of the molecular weight on their crystallisation and mechanical properties
The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index; 3 of the 9 sources its claims cite were checked for support.
Abstract
With the general objective to design polymer based materials with specific thermal and mechanical properties, a systematic study on the crystallinity and the mechanical properties of synthesized linear tri-block copolymers based on poly(L-lactic acid) and poly(ε-caprolactone) and of their corresponding poly(ester-urethane)s has been performed. In particular, eleven tri-block copolymers were synthesized varying both the molecular weight of the blocks as well as the relative content of each block in the copolymer, focusing the attention on the relationship between their chemical compositions and their tailored final properties in order to tune them taking into account their possible applications (i.e. as shape memory materials). From them, eleven poly(ester-urethane)s were synthesized by condensation with hexamethylene diisocyanate (HDI). The chemical composition of the synthesized polymers was studied and correlated with their thermal and crystalline properties obtained by both dynamic scanning calorimetry (DSC) and small angle X-ray diffraction (SAXS) experiments. The relationship between their crystalline structure, thermal and mechanical properties with the molecular weight as well as with the relative content of each comonomer in the copolymers and the amount of HDI in the poly(ester-urethane) was analysed. The results obtained demonstrate that these bio tri-block copolymers and the corresponding poly(ester-urethane)s can be tailored with interesting crystalline and mechanical properties. Future applications as shape memory systems are thus envisaged.
Overview
CoChat Summary
TL;DR
Eleven PLLA-b-PCL-b-PLLA tri-block copolymers and their HDI-derived poly(ester-urethane)s were synthesized and characterized to relate block molecular weight/composition to crystallization and mechanical behavior. The tri-blocks and PUs can be tailored over a range of thermal and mechanical properties, with potential use as shape-memory materials.
Key findings
- PCL crystallinity in the tri-blocks is strongly affected by PLLA: with amorphous PLLA, PCL crystallinity is around 50%, but crystalline PLLA reduces PCL crystallinity and melting point, eventually suppressing PCL crystallization in some compositions (e.g., T11).
- PLLA crystallinity in the tri-blocks depends mainly on PLLA block length, not on PCL; PLLA reaches approximately 165 °C Tm and about 55% maximum crystallinity, similar to PCL-PLLA di-block copolymers.
- Poly(ester-urethane)s are less crystalline than their tri-block precursors because urethane linkages and hydrogen bonds restrict chain mobility; PLLA crystallinity is negligible in PUs based on PCL 2000 and PCL 4000, while PUs based on PCL 8000 crystallize more significantly.
- Mechanical behavior tracks crystallinity: PUs with amorphous PLLA show high elongation at break (e.g., PU2 1631 ± 127%, PU3 2020 ± 80%), while increasing PLLA crystallinity makes materials stiffer and more brittle (e.g., PU4 elongation 25 ± 4%, PU7 30 ± 5%).
Methods
- Eleven PLLA-b-PCL-b-PLLA tri-blocks were synthesized by ring-opening polymerization of L-lactide from three commercial PCL diols (nominal 2000, 4000, and 8000 g/mol) using Sn(Oct)2, in bulk at 180 °C for 3 h.
- Eleven poly(ester-urethane)s were made by polycondensation of the tri-blocks with hexamethylene diisocyanate (HDI) at 1:1 molar ratio in dichloroethane at 80 °C for 5 h.
- Characterization included 1H NMR, MALDI-TOF/GPC, FT-IR, DSC, SAXS, and tensile tests; DSC and SAXS were used to correlate composition and molecular weight with crystallization, thermal transitions, and mechanical properties.
Limitations
- The paper states that precise stoichiometry for the polycondensation was difficult to define because 1H NMR molecular-weight calculation of the initial tri-block is inaccurate at high molecular weights; this can affect final PU molecular weight and mechanical properties.
- The paper states that PU11 could not be tested mechanically due to high fragility.
- The text makes evident that SAXS comparison may be affected by different sample processing: tri-blocks were melted and cooled in DSC pans, while poly(ester-urethane)s were wrapped in aluminum foil without further thermal treatment before SAXS.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
3 Valid · 1 Not valid · 4 Not checked · 79 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“Only at intermediate concentrations (PCL:PLA 50:50 by weight) PCL crystallized substantially without a strong restriction promoted by the presence of PLLA crystals.”
What the sources say
- Supportedcites [14] source
The Conclusions (p. 18) state that, for some 50:50 di-block copolymers with short PLLA blocks, PLLA crystals do not strongly interfere with PCL crystallization and PCL reaches high crystallinity. The thermal-properties discussion (p. 12) likewise identifies these as exceptions to the strong restriction seen in the other copolymers studied. (LLM, conf=0.91)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“That is, the transition temperatures are closer in the PUs than in the corresponding three block copolymers.”
plainstates an associationSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“eleven tri-block copolymers were synthesized varying both the molecular weight of the blocks as well as the relative content of each block in the copolymer”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The formation of the urethane bonds was confirmed by FT-IR analysis.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The values of polydispersity of the different synthesized copolymers ranged from 1.2 to 1.5.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
40 more claims
Create a free account to see all 87 claims and every source verdict.
- It may state two separate claims as one. 34
- Probably not a substantial claim. 10
- The quote only partly states this claim. 1
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The molecular weight, estimated by comparing the 1 H NMR signals of protons of PCL and PLLA [27], resulted in 8434,7 g mol -1 [11].”
From Biodegradable poly(ester-urethane) incorporated with catechin with shape memory and antioxidant activity for food packaging (2017) · cites this paper as [27]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Fig. 3. FT-IR spectrum for T6 and PU6. · p. 6
“Thus, for the PCL 8000 series, when PLLA content is increased, PCL crystallisation is reduced until complete suppression (entries T4, T7, T9 and T10)”
§ Synthesis of poly(ester-urethane)s based on PCL-PLLA · p. 2
“| T10 | 30:70 | 32:68 | 4021 | 12502 | 10316 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ SAXS Characterization · p. 11
“and thus comparing every tri-blocks with the corresponding PUs, these ones present higher values.”
§ SAXS Characterization · p. 10
“| 11 | 18:82 | 21.7 | 14.9 | 17.3 | 17.3 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Mechanical properties 40 · p. 11
“(PU6, PU8 and PU10), show the highest elongation at break.”
§ Mechanical properties 40 · p. 11
“showing lower 60 values of the elongation at break(PU4, PU6, PU7 and PU9).”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ SAXS Characterization · p. 10
“Table 4 shows that the long period L in the 75 tri-blocks having both crystalline blocks, increases when PCL is in the molten state.”
§ SAXS Characterization · p. 10
“| 7 | 54:46 | 18.3 | 15.5 | 14.5 | 21.5 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis of poly(ester-urethane)s based on PCL-PLLA · p. 2
“| T5 | 50:50 | 73:37 | 2054 | 2903 | 3152 |”
§ Fig. 3. FT-IR spectrum for T6 and PU6. · p. 5
“| T5 | 73:2 7 | 20 54 | 774 | 44 | 43 | - | 0 - 13 |”
Citations
Cites
Pal, M., Pal, U., Jiménez, J. M. G. Y., & Pérez-Rodríguez, F. (2012) · Nanoscale Research Letters · doi:10.1186/1556-276x-7-1 · Cited by 2,620
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
(2016) · CRC Press eBooks · doi:10.1201/b12801 · Cited by 2,031
Biodegradable block copolymers as injectable drug-delivery systems
Jeong, B., Bae, Y. H., Lee, D. S., & Kim, S. W. (1997) · Nature · doi:10.1038/42218 · Cited by 1,997
FTIR study of polycaprolactone chain organization at interfaces
Elzein, T., Nasser-Eddine, M., Delaite, C., Bistac, S., & Dumas, P. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.02.001 · Cited by 814
Kister, G., Cassanas, G., & Vert, M. (1998) · Polymer · doi:10.1016/s0032-3861(97)00229-2 · Cited by 689
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Functional aliphatic polyesters for biomedical and pharmaceutical applications
Seyednejad, H., Ghassemi, A. H., van Nostrum, C. F., Vermonden, T., & Hennink, W. E. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.12.016 · Cited by 425
Designing biodegradable multiblock PCL/PLA thermoplastic elastomers
Cohn, D., & Hotovely Salomon, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.052 · Cited by 355
Castillo, R. V., & Müller, A. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.03.002 · Cited by 253
Research works printed but not linked: 2
- Langer, 1998, Nature, 392, 5
- Lu, 2008, J. Mater. Sci.: Mater. Med., 19, 395
Cited by
Arrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.12.058 · Cited by 136
Self-citationArrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.027 · Cited by 106
Self-citationThe effect of maleinized linseed oil as biobased plasticizer in poly(lactic acid)‐based formulations
Ferri, J. M., García‐García, D., Muñoz, N. M., Fenollar, O., & Balart, R. (2017) · Polymer International · doi:10.1002/pi.5329 · Cited by 92
Peponi, L., Sessini, V., Arrieta, M. P., Navarro-Baena, I., Sonseca, Á., Dominici, F., Giménez, E., Torre, L., Tercjak, A., López, D., et al. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.02.019 · Cited by 82
Self-citationYounas, M., Noreen, A., Sharif, A., Majeed, A., Hassan, A., Tabasum, S., Mohammadi, A., & Zia, K. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.064 · Cited by 74
Navarro-Baena, I., Kenny, J. M., & Peponi, L. (2014) · Cellulose · doi:10.1007/s10570-014-0446-5 · Cited by 68
“Synthesis of poly(ester-urethane) based on PCL–PLLA The studied poly(ester-urethane) (PU) based on PCL and PLLA has been synthesised in two steps as previously reported by us (Navarro-Baena et al. 2014a).”
BackgroundMethodSelf-citationArrieta, M. P., & Peponi, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.02.028 · Cited by 58
Self-citationGenovese, L., Soccio, M., Lotti, N., Gazzano, M., Siracusa, V., Salatelli, E., Balestra, F., & Munari, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.08.001 · Cited by 56
Arrieta, M. P., Peponi, L., López, D., López, J., & Kenny, J. M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804302-8.00012-1 · Cited by 72
Self-citationArrieta, M. P., Sessini, V., & Peponi, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.047 · Cited by 55
Self-citationSynthesis of biodegradable thermoplastic elastomers from ε‐caprolactone and lactide
Nakayama, Y., Aihara, K., Yamanishi, H., Fukuoka, H., Tanaka, R., Cai, Z., & Shiono, T. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27463 · Cited by 55
Zhou, D., Shao, J., Li, G., Sun, J., Bian, X., & Chen, X. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.019 · Cited by 49
Recent progress in block copolymer crystallization
Van Horn, R. M., Steffen, M. R., & O'Connor, D. (2018) · POLYMER CRYSTALLIZATION · doi:10.1002/pcr2.10039 · Cited by 49
Navarro-Baena, I., Arrieta, M. P., Sonseca, A., Torre, L., López, D., Giménez, E., Kenny, J. M., & Peponi, L. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.09.002 · Cited by 38
Self-citationHuang, Y., Chen, F., Pan, Y., Chen, C., Jiang, L., & Dan, Y. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.09.044 · Cited by 42
Navarro-Baena, I., Kenny, J. M., & Peponi, L. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.03.012 · Cited by 36
Self-citationInfluence of the Processing Parameters on the Electrospinning of Biopolymeric Fibers
Mújica-García, A., Navarro-Baena, I., Kenny, J. M., & Peponi, L. (2014) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2013.634130 · Cited by 36
Self-citationBanerjee, S. L., Saha, P., Ganguly, R., Bhattacharya, K., Kalita, U., Pich, A., & Singha, N. K. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.12.018 · Cited by 32
Fabbri, M., Soccio, M., da Costa, M. L., Lotti, N., Gazzano, M., Siracusa, V., Gamberini, R., Rimini, B., Munari, A., García‐Fernández, L., et al. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.024 · Cited by 36
Yin, G., Zhao, D., Wang, X., Ren, Y., Zhang, L., Wu, X., Nie, S., & Li, Q. (2015) · RSC Advances · doi:10.1039/c5ra15531b · Cited by 28
Roberts, C. T., Beck, S. K., Prejean, C. M., Graul, L. M., Maitland, D. J., & Grunlan, M. A. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00050a · Cited by 29
Jing, Z., Shi, X., & Zhang, G. (2017) · Polymer International · doi:10.1002/pi.5404 · Cited by 21
Crystallization behavior of diblock copolymers based on PCL and PLLA biopolymers
Navarro-Baena, I., Marcos-Fernández, Á. A., Kenny, J. M., & Peponi, L. (2014) · Journal of Applied Crystallography · doi:10.1107/s1600576714022468 · Cited by 20
Self-citationWu, C.-P., Wang, C., & Chen, C. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.02.018 · Cited by 21
Palacios, J. K., Mugica, A., Zubitur, M., & Müller, A. J. (2018) · Crystallization in Multiphase Polymer Systems · doi:10.1016/b978-0-12-809453-2.00006-2 · Cited by 18
Salgado, C., Arrieta, M. P., Peponi, L., Fernández‐García, M., & López, D. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600515 · Cited by 18
Self-citationMatxinandiarena, E., Múgica, A., Tercjak, A., Ladelta, V., Zapsas, G., Hadjichristidis, N., Cavallo, D., Flores, A., & Müller, A. J. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01186 · Cited by 16
Influence of plasticizers on the compostability of polylactic acid
Arrieta, M. P. (2021) · Journal of Applied Research in Technology & Engineering · doi:10.4995/jarte.2021.14772 · Cited by 21
Palacios, J. K., Liu, G., Wang, D., Hadjichristidis, N., & Müller, A. J. (2019) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201900292 · Cited by 15
Salgado, C., Arrieta, M. P., Peponi, L., Fernández‐García, M., & López, D. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.05.030 · Cited by 16
Self-citationKonwar, D. B., Sethy, S., Satapathy, B. K., & Jacob, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.07.014 · Cited by 15
Matxinandiarena, E., Múgica, A., Zubitur, M., Ladelta, V., Zapsas, G., Cavallo, D., Hadjichristidis, N., & Müller, A. J. (2021) · Polymers · doi:10.3390/polym13183133 · Cited by 12
Mısır, M., Yılmaz, S. S., & Bílgín, A. (2023) · Polymers · doi:10.3390/polym15183813 · Cited by 12
“Aliphatic polyesters such as poly (L-lactic acid) (PLLA) and poly( ε –caprolactone) (PCL) are interesting polymers for pharmacological, biomedical, environmental, and agricultural applications due to their good mechanical properties, hydrolyzability, and biocompatibility [52–54].”
BackgroundThermal Degradation Effects on Polyurethanes and Their Nanocomposites
Navarro‐Baena, I., Arrieta, M. P., Mujica‐Garcia, A., Sessini, V., Lopez, D., Kenny, J. M., & Peponi, L. (2015) · Reactions and Mechanisms in Thermal Analysis of Advanced Materials · doi:10.1002/9781119117711.ch7 · Cited by 8
Self-citationTakagi, A., Hsu, Y., & Uyama, H. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111301 · Cited by 7
Izraylit, V., Hommes‐Schattmann, P. J., Neffe, A. T., Gould, O. E. C., & Lendlein, A. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109916 · Cited by 6
Konwar, D. B., Satapathy, B. K., & Jacob, J. (2018) · Polymer International · doi:10.1002/pi.5723 · Cited by 7
Şahin, M., Mısır, M., & Arslan, Y. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.56556 · Cited by 5
Polyester Adhesives via One-Pot, One-Step Copolymerization of Cyclic Anhydride, Epoxide, and Lactide
Suzuki, R., Miwa, T., Nunokawa, R., Sumi, A., Ando, M., Takahashi, K., Takagi, A. P., Yamamoto, T., Tajima, K., Li, F., et al. (2024) · Polymers · doi:10.3390/polym16192767 · Cited by 4
Shape-memory polymer nanocomposites: Processing, mechanisms, modelling, and applications
Vozniak, A., Santo, L., & Vozniak, I. (2026) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2026.03.002 · Cited by 4
Mısır, M., Mutlu, S., Bagheralmoosavi, S., Ortaç, B., Karatutlu, A., Yesilöz, G., & Yılmaz, S. S. (2025) · Advanced Materials Interfaces · doi:10.1002/admi.202500195 · Cited by 2
Pereira, F. M. (2020) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.18.2020.tde-02022021-141212 · Cited by 1
Metadata
- Authors
- Navarro-Baena, I., Marcos-Fernández, A., Fernández-Torres, A., Kenny, J. M., & Peponi, L.
- Affiliations
- Consejo Superior de Investigaciones Científicas (ES)
- Corresponding author
- Peponi, Laura
- ORCID
- Peponi, Laura
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 4
- Issue
- 17
- Pages
- 8510
- ISSN
- 2046-2069 (ISSN-L)
- OpenAlex
- W2083234147
- Semantic Scholar
- 6870c2747916e3591796784af844e2ff3cca2047
- Cited by
- 43
- References
- 34
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 3 · 2023: 1 · 2021: 3 · 2020: 3 · 2019: 1 · 2018: 4 · 2017: 10 · 2016: 4 · 2015: 5 · 2014: 5
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- RSC Advances (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- poly(L-lactic acid), polycaprolactone, mechanical properties, molecular weight effects, block composition, hexamethylene diisocyanate, shape memory materials, bio-based polymers, thermal properties
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.