Effect of miscibility on spherulitic growth rate for double-layer polymer films
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The spherulitic growth rates for the lower polylactide (PLA) layer in poly(ε-caprolactone)/polylactide (PCL/PLA), poly(ethylene oxide)/polylactide (PEO/PLA), and poly(ethylene glycol)/polylactide (PEG/PLA) double-layer films during isothermal crystallization at various temperatures above the melting points of PCL, PEO and PEG layers have been measured by using polarized optical microscopy (POM), with the particular results compared with those for neat PLA films. The PCL/PLA, PEO/PLA and PEG/PLA double-layer films were in situ prepared by covering PCL, PEO and PEG films, respectively on PLA films at 180 °C and holding for 5 min before quenching to isothermal crystallization temperatures for POM observations. It is interesting to find that the covering molten PEG layer can greatly accelerate the spherulitic growth rates for the lower PLA layer and a PEO layer shows a similar effect for PEO/PLA double-layer films. However, the effect of the PEO layer is weaker than that of PEG layer for acceleration of PLA spherulitic growth rates in the double-layer films. Covering a molten PCL layer on a PLA layer can only slightly increase the spherulitic growth rate of PLA. Different spherulitic morphologies in the neat PLA film and PCL/PLA, PEO/PLA and PEG/PLA double-layer films can be observed. The miscibility of these polymer pairs was investigated by using differential scanning calorimetry (DSC) and phase contrast optical microscopy (PCOM), which is proposed to play a key role for the observed accelerating effects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Morphological and Kinetic Analyses of Regime Transition for Poly[(S)-lactide] Crystal Growth
Abe, H., Kikkawa, Y., Inoue, Y., & Doi, Y. (2001) · Biomacromolecules · doi:10.1021/bm015543v · Cited by 179
Yang, J.-M., Chen, H.-L., You, J.-W., & Hwang, J. C. (1997) · Polymer Journal · doi:10.1295/polymj.29.657 · Cited by 163
Cited by
Wei, X.-F., Bao, R.-Y., Cao, Z.-Q., Yang, W., Xie, B.-H., & Yang, M.-B. (2014) · Macromolecules · doi:10.1021/ma402653a · Cited by 324
Bhaskar, B., Owen, R., Bahmaee, H., Wally, Z., Sreenivasa Rao, P., & Reilly, G. C. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36336 · Cited by 61
Liu, M.-J., Chen, S.-C., Yang, K.-K., & Wang, Y.-Z. (2015) · RSC Advances · doi:10.1039/c5ra04742k · Cited by 45
Preparation of multiblock copolymers via step-wise addition of l -lactide and trimethylene carbonate
Abubekerov, M., Wei, J., Swartz, K. R., Xie, Z., Pei, Q., & Diaconescu, P. L. (2018) · Chemical Science · doi:10.1039/c7sc04507g · Cited by 45
Metadata
- Authors
- Zhang, Y., Wang, Z., Jiang, F., Bai, J., & Wang, Z.
- Venue
- Soft Matter
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 9
- Issue
- 24
- Pages
- 5771
- ISSN
- 1744-683X (ISSN-L)
- 1744-6848
- OpenAlex
- W2080790125
- Cited by
- 52
- References
- 4
- FWCI
- 6.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of miscibility on spherulitic growth rate for double-layer polymer films. https://app.cochat.ai/papers/10.1039/c3sm50542a
- The paper
- Zhang, Y., Wang, Z., Jiang, F., Bai, J., & Wang, Z. (2013). Effect of miscibility on spherulitic growth rate for double-layer polymer films. Soft Matter. https://doi.org/10.1039/c3sm50542a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.