Miscibility and Crystallization of Poly(L-lactide)/Poly(ethylene glycol) and Poly(L-lactide)/Poly(ε-caprolactone) Blends

Treatise on Solid State Chemistry

(1976) · Springer eBooks · doi:10.1007/978-1-4613-4316-5 · Cited by 1,416 · see citing works

Stereocomplex formation between enantiomeric poly(lactides)

Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409 · see citing works

Stereocomplex Formation between Enantiomeric Poly(lactide)s

박은하, & 진인주 (2010) · 한국고분자학회 학술대회 연구논문 초록집 · Cited by 1,084 · see citing works

General crystallization behaviour of poly(l-lactic acid)

Kalb, B., & Pennings, A. J. (1980) · Polymer · doi:10.1016/0032-3861(80)90315-8 · Cited by 422 · see citing works

Stereocomplex formation between enantiomeric poly(lactic acid)s. 3. Calorimetric studies on blend films cast from dilute solution

Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334 · see citing works

Synthesis, Characterization, and Hydrolytic Degradation of PLA/PEO/PLA Triblock Copolymers with Long Poly( l -lactic acid) Blocks

Li, S., Rashkov, I. B., Espartero, J. L., Manolova, N. E., & Vert, M. (1996) · Macromolecules · doi:10.1021/ma950531l · Cited by 262 · see citing works

Crystallization and thermal behaviour of poly(d(—)-3-hydroxybutyrate)-based blends

Greco, P., & Martuscelli, E. (1989) · Polymer · doi:10.1016/0032-3861(89)90219-x · Cited by 226 · see citing works

Stereocomplex formation between enantiomeric poly(lactic acid)s. 4. Differential scanning calorimetric studies on precipitates from mixed solutions of poly(D-lactic acid) and poly(L-lactic acid)

Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a027 · Cited by 226 · see citing works

Poly(L-lactic acid)/Pluronic blends: characterization of phase separation behavior, degradation, and morphology and use as protein-releasing matrixes

Park, T. G., Cohen, S., & Langer, R. (1992) · Macromolecules · doi:10.1021/ma00027a019 · Cited by 221 · see citing works

Phase separation in poly(ethylene glycol)/poly(lactic acid) blends

Younes, H., & Cohn, D. (1988) · European Polymer Journal · doi:10.1016/0014-3057(88)90013-4 · Cited by 212 · see citing works

Morphological changes in polyesters and polyamides induced by blending with small concentrations of polymer diluents

Keith, H. D., Padden, F. J., & Russell, T. P. (1989) · Macromolecules · doi:10.1021/ma00192a027 · Cited by 192 · see citing works

Physical Properties and Enzymic Degradability of Polymer Blends of Bacterial Poly[(R)-3-hydroxybutyrate] and Poly[(R,S)-3-hydroxybutyrate] Stereoisomers

Abe, H., Matsubara, I., & Doi, Y. (1995) · Macromolecules · doi:10.1021/ma00108a007 · Cited by 171 · see citing works

Melting and Crystallization of Poly(L-lactic acid) and Poly(ethylene oxide) Binary Mixture

Nakafuku, C., & Sakoda, M. (1993) · Polymer Journal · doi:10.1295/polymj.25.909 · Cited by 140 · see citing works

Application of digital image analysis to pattern formation in polymer systems

Tanaka, H., Hayashi, T., & Nishi, T. (1986) · Journal of Applied Physics · doi:10.1063/1.336795 · Cited by 130 · see citing works

Complex composition distribution of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Yoshie, N., Menju, H., Sato, H., & Inoue, Y. (1995) · Macromolecules · doi:10.1021/ma00123a018 · Cited by 125 · see citing works

Biodegradable polymers for use in surgery—poly(ethylene oxide) poly(ethylene terephthalate) (PEO/PET) copolymers: 1

Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90008-9 · Cited by 102 · see citing works

Biodegradable polymers for use in surgery — poly(ethylene oxide)/poly(ethylene terephthalate) (PEO/PET) copolymers: 2. In vitro degradation

Reed, A. M., & Gilding, D. K. (1981) · Polymer · doi:10.1016/0032-3861(81)90169-5 · Cited by 95 · see citing works

Effects of Molecular Weight on the Melting and Crystallization of Poly(L-lactic acid) in a Mixture with Poly(ethylene oxide)

Nakaruku, C. (1996) · Polymer Journal · doi:10.1295/polymj.28.568 · Cited by 81 · see citing works

Morphological studies of poly(vinylidene fluoride) and its blends with poly(methyl methacrylate)

Morra, B. S., & Stein, R. S. (1982) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1982.180201208 · Cited by 80 · see citing works

Crystallization kinetics in blends of isotactic and atactic poly(β-hydroxybutyrate)

Pearce, R., Brown, G. R., & MARCHESSAULT, R. H. (1994) · Polymer · doi:10.1016/0032-3861(94)90284-4 · Cited by 71 · see citing works

An investigation of the compatibility and morphology of semicrystalline poly(ε‐caprolactone)–poly(vinyl chloride) blends

Russell, T. P., & Stein, R. S. (1983) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1983.180210701 · Cited by 69 · see citing works

Melting and Crystallization in Bacterial Poly(.beta.-hydroxyvalerate),PHV, and Blends with Poly(.beta.-hydroxybutyrate-co-hydroxyvalerate)

Pearce, R. P., & MARCHESSAULT, R. H. (1994) · Macromolecules · doi:10.1021/ma00092a029 · Cited by 62 · see citing works

Phase separation in a blend of poly(hydroxybutyrate) with poly(hydroxybutyrate-co-hydroxyvalerate)

Organ, S. J., & Barham, P. (1993) · Polymer · doi:10.1016/0032-3861(93)90535-i · Cited by 51 · see citing works

Biodegradation of copoly( L ‐aspartic acid/ L ‐glutamic acid) in vitro

Hayashi, T., & Iwatsuki, M. (1990) · Biopolymers · doi:10.1002/bip.360290310 · Cited by 46 · see citing works

Polymer blends based on bacterial poly(3-hydroxybutyrate)

Scandola, M. (1995) · Canadian Journal of Microbiology · doi:10.1139/m95-202 · Cited by 33 · see citing works

Biodegradability of poly(vinyl acetate) containing a pyridinium group

Kawabata, N., & Kurooka, T. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070560413 · Cited by 16 · see citing works

Crystallization From Polymer Blends

Stein, R. S. (1993) · MRS Proceedings · doi:10.1557/proc-321-531 · Cited by 10 · see citing works

Properties of lactic acid based polymers and their correlation with composition

Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461 · see citing works

Thermal and mechanical properties of plasticized poly(L‐lactic acid)

Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568 · see citing works

The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)

Ljungberg, N., & Wesslén, B. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11077 · Cited by 424 · see citing works

Mechanical properties, morphology, and crystallization behavior of blends of poly(l-lactide) with poly(butylene succinate-co-l-lactate) and poly(butylene succinate)

Shibata, M., Inoue, Y., & Miyoshi, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.065 · Cited by 376 · see citing works

Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor?

Pillin, I., Montrelay, N., & Grohens, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.013 · Cited by 366 · see citing works

Preparation and Properties of Plasticized Poly(lactic acid) Films

Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331 · see citing works

Immiscible polymer blends of semicrystalline biocompatible components: thermal properties and phase morphology analysis of PLLA/PCL blends

Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318 · see citing works

Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends

López‐Rodríguez, N., López-Arraiza, A., Meaurio, E., & Sarasua, J.-R. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20609 · Cited by 288 · see citing works

Tributyl citrate oligomers as plasticizers for poly (lactic acid): thermo-mechanical film properties and aging

Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278 · see citing works

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity

Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261 · see citing works

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularity

Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258 · see citing works

Crystallization and phase separation in blends of high stereoregular poly(lactide) with poly(ethylene glycol)

Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00609-8 · Cited by 238 · see citing works

Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications

Teixeira, S., Eblagon, K. M., Miranda, F. P., Pereira, M. F. R., & Figueiredo, J. L. (2021) · C – Journal of Carbon Research · doi:10.3390/c7020042 · Cited by 239 · see citing works

Compatibilization Effect of Poly(ε-caprolactone)-<i>b</i>-poly(ethylene glycol) Block Copolymers and Phase Morphology Analysis in Immiscible Poly(lactide)/Poly(ε-caprolactone) Blends

Na, Y.-H., He, Y., Shuai, X., Kikkawa, Y., Doi, Y., & Inoue, Y. (2002) · Biomacromolecules · doi:10.1021/bm020050r · Cited by 219 · see citing works

Controlled preparation and properties of porous poly(l-lactide) obtained from a co-continuous blend of two biodegradable polymers

Sarazin, P., Roy, X., & Favis, B. D. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.065 · Cited by 210 · see citing works

Miscibility and phase structure of binary blends of polylactide and poly(methyl methacrylate)

Zhang, G., Zhang, J., Wang, S., & Shen, D. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10353 · Cited by 206 · see citing works

The effect of end groups of PEG on the crystallization behaviors of binary crystalline polymer blends PEG/PLLA

Lai, W., Liau, W., & Lin, T.-T. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.003 · Cited by 191 · see citing works

Development and evaluation of novel biodegradable microspheres based on poly(d,l-lactide-co-glycolide) and poly(ε-caprolactone) for controlled delivery of doxycycline in the treatment of human periodontal pocket: In vitro and in vivo studies

Mundargi, R. C., Sridharan, S., Agnihotri, S. A., Patil, S. A., Ravindra, S., Setty, S. B., & Aminabhavi, T. M. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.01.008 · Cited by 190 · see citing works

Spherulite growth rates in binary polymer blends

Lorenzo, M. L. D. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00035-7 · Cited by 182 · see citing works

Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- <i>b</i> -PCL Diblock Copolymers

Castillo, R. V., Müller, A. J., Raquez, J.-M., & Dubois, P. (2010) · Macromolecules · doi:10.1021/ma100201g · Cited by 175 · see citing works

Poly(lactic acid) properties as a consequence of poly(butylene adipate‐ co ‐terephthalate) blending and acetyl tributyl citrate plasticization

Coltelli, M., Maggiore, I. D., Bertoldo, M., Signori, F., Bronco, S., & Ciardelli, F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28512 · Cited by 134 · see citing works

Polymer/Polymer Inclusion Compounds as a Novel Approach To Obtaining a PLLA/PCL Intimately Compatible Blend

Rusa, C. C., & Tonelli, A. E. (2000) · Macromolecules · doi:10.1021/ma000746h · Cited by 136 · see citing works

Poly(ε-caprolactone) Blends

Eastmond, G. C. (1999) · Advances in polymer science · doi:10.1007/3-540-48838-3_2 · Cited by 112 · see citing works

Thermal properties of di- and triblock copolymers of poly(l-lactide) with poly(oxyethylene) or poly(ε-caprolactone)

Maglio, G., Migliozzi, A., & Palumbo, R. (2003) · Polymer · doi:10.1016/s0032-3861(02)00764-4 · Cited by 111 · see citing works

Melt Structure and its Transformation by Sequential Crystallization of the Two Blocks within Poly( <scp>L</scp> ‐lactide)‐ <i>block</i> ‐Poly( <i>ε</i> ‐caprolactone) Double Crystalline Diblock Copolymers

Hamley, I. W., Parras, P., Castelletto, V., Castillo, R. V., Müller, A. J., Pollet, E., Dubois, P., & Martin, C. M. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600085 · Cited by 108 · see citing works

Blends of aliphatic polyesters: V non-enzymatic and enzymatic hydrolysis of blends from hydrophobic poly(l-lactide) and hydrophilic poly(vinyl alcohol)

Tsuji, H., & Muramatsu, H. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00192-0 · Cited by 105 · see citing works

Formation of and Coalescence from the Inclusion Complex of a Biodegradable Block Copolymer and α-Cyclodextrin: A Novel Means To Modify the Phase Structure of Biodegradable Block Copolymers

Shuai, X., Porbeni, F. E., Wei, M., Shin, I. D., & Tonelli, A. E. (2001) · Macromolecules · doi:10.1021/ma0109626 · Cited by 103 · see citing works

Part 7. Effects of poly(<scp>L</scp>‐lactide‐<i>co</i>‐ϵ‐caprolactone) on morphology, structure, crystallization, and physical properties of blends of poly(<scp>L</scp>‐lactide) and poly(ϵ‐caprolactone)

Tsuji, H., Yamada, T., Suzuki, M., & Itsuno, S. (2003) · Polymer International · doi:10.1002/pi.1093 · Cited by 101 · see citing works

Mechanical properties, morphologies, and crystallization behavior of plasticized poly(l-lactide)/poly(butylene succinate-co-l-lactate) blends

Shibata, M., Teramoto, N., & Inoue, Y. (2007) · Polymer · doi:10.1016/j.polymer.2007.02.065 · Cited by 99 · see citing works

An Amphiphilic Entangled Network Design Toward Ultratough Hydrogels

Hou, X., Huang, B., Zhou, L., Liu, S., Kong, J., & He, C. (2023) · Advanced Materials · doi:10.1002/adma.202301532 · Cited by 98 · see citing works

Morphology and hydrolysis of PCL/PLLA blends compatibilized with P(LLA‐co‐ϵCL) or P(LLA‐b‐ϵCL)

Choi, N., Kim, C., Cho, K. Y., & Park, J. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11134 · Cited by 97 · see citing works

Two Calorimetric Glass Transitions in Miscible Blends Containing Poly(ethylene oxide)

Gaikwad, A. N., Wood, E. R., Ngai, T., & Lodge, T. P. (2008) · Macromolecules · doi:10.1021/ma702429r · Cited by 94 · see citing works

Thermal, mechanical, and rheological properties of plasticized poly( L ‐lactic acid)

Ge, H., Yang, F., Hao, Y., Wu, G., Zhang, H., & Dong, L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37620 · Cited by 93 · see citing works

Immiscible Poly( L ‐lactide)/Poly(ε‐caprolactone) Blends: Influence of the Addition of a Poly( L ‐lactide)‐Poly(oxyethylene) Block Copolymer on Thermal Behavior and Morphology

Maglio, G., Malinconico, M., Migliozzi, A., & Groeninckx, G. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200300150 · Cited by 89 · see citing works

Porous membranes of PLLA–PCL blend for tissue engineering applications

Lebourg, M., Suay, J., & Ribelles, J. L. G. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.04.033 · Cited by 85 · see citing works

Effect of P(lLA-co-?CL) on the compatibility and crystallization behavior of PCL/PLLA blends

Kim, C.-H., Cho, K. Y., Choi, E., & Park, J.-K. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000705)77:1 · Cited by 78 · see citing works

Blends of aliphatic polyesters. VI. Lipase-catalyzed hydrolysis and visualized phase structure of biodegradable blends from poly(ε-caprolactone) and poly(l-lactide)

Tsuji, H., & Ishizaka, T. (2001) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(01)00158-1 · Cited by 77 · see citing works

Development of Bioresorbable Hydrophilic–Hydrophobic Electrospun Scaffolds for Neural Tissue Engineering

Lins, L. C., Wianny, F., Livi, S., Hidalgo, I. A., Dehay, C., Duchet‐Rumeau, J., & Gérard, J. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00820 · Cited by 75 · see citing works

Plasticization of poly(lactic acid) with oligomeric malonate esteramides: Dynamic mechanical and thermal film properties

Ljungberg, N., Colombini, D., & Wesslén, B. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21163 · Cited by 73 · see citing works

Structural Study of Poly( l -lactic acid) Spherulites

Gazzano, M., Focarete, M. L., Riekel, C., & Scandola, M. (2003) · Biomacromolecules · doi:10.1021/bm0343951 · Cited by 73 · see citing works

Plasticizing effect of poly(ethylene glycol)s with different molecular weights in poly(lactic acid)/starch blends

Yu, Y., Cheng, Y., Ren, J., Cao, E., Fu, X., & Guo, W. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41808 · Cited by 74 · see citing works

Morphologies and mechanical properties of polylactide blends with medium chain length poly(3‐hydroxyalkanoate) and chemically modified poly(3‐hydroxyalkanoate)

Takagi, Y., Yasuda, R., Yamaoka, M., & Yamané, T. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20734 · Cited by 67 · see citing works

Comparison of abiotic and biotic degradation of PDLLA, PCL and partially miscible PDLLA/PCL blend

Fukushima, K., Feijoo, J. L., & Yang, M. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.011 · Cited by 67 · see citing works

Formation of and Coalescence from the Inclusion Complex of a Biodegradable Block Copolymer and α-Cyclodextrin. 2: A Novel Way To Regulate the Biodegradation Behavior of Biodegradable Block Copolymers

Shuai, X., Wei, M., Porbeni, F. E., Bullions, T. A., & Tonelli, A. E. (2001) · Biomacromolecules · doi:10.1021/bm015609m · Cited by 66 · see citing works

Miscibility and phase structure of binary blends of polylactide and poly(vinylpyrrolidone)

Zhang, G., Zhang, J., Zhou, X., & Shen, D. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11735 · Cited by 65 · see citing works

Thermorheological properties of poly (ε‐caprolactone)/polylactide blends

Noroozi, N., Schafer, L. L., & Hatzikiriakos, S. G. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23186 · Cited by 62 · see citing works

Crystallization behavior and mechanical properties of poly(ethylene oxide)/poly( L ‐lactide)/poly(vinyl acetate) blends

Kim, K., Chin, I.-J., Yoon, J. S., Choi, H. J., Lee, D. C., & Lee, K. H. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2224 · Cited by 65 · see citing works

Properties and phase structure of melt-processed PLA/PMMA blends

Gonzalez‐Garzon, M., Shahbikian, S., & Huneault, M. A. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1438-1 · Cited by 60 · see citing works

Investigation of PLLA/PCL Blends and Paclitaxel Release Profiles

Can, E., Udenir, G., Kanneci, A. I., Köse, G. T., & Bucak, Ş. (2011) · AAPS PharmSciTech · doi:10.1208/s12249-011-9714-y · Cited by 57 · see citing works

Crystallization behavior of poly(l-lactide)-poly(ethylene glycol) multiblock copolymers

Lee, S.-Y., Chin, I.-J., & Jung, J.-S. (1999) · European Polymer Journal · doi:10.1016/s0014-3057(99)00024-5 · Cited by 56 · see citing works

Long-term delivery of all-trans-retinoic acid using biodegradable PLLA/PEG-PLLA blended microspheres

Choi, Y., Kim, S. Y., Kim, S. H., Lee, K.-S., Kim, C., & Byun, Y. (2001) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(00)00676-1 · Cited by 54 · see citing works

Effect of miscibility on spherulitic growth rate for double-layer polymer films

Zhang, Y., Wang, Z., Jiang, F. D., Bai, J., & Wang, Z. (2013) · Soft Matter · doi:10.1039/c3sm50542a · Cited by 52 · see citing works

Blending of poly(L-lactic acid) with poly(cis-1,4-isoprene)

Jin, H., Chin, I.-J., Kim, M.-N., Kim, S. H., & Yoon, J. (2000) · European Polymer Journal · doi:10.1016/s0014-3057(99)00041-5 · Cited by 50 · see citing works

Enzymatic ring‐opening polymerization (ROP) of polylactones: roles of non‐aqueous solvents

Zhao, H. (2017) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.5444 · Cited by 47 · see citing works

Structural Characterization of a Lipase-Catalyzed Copolymerization of ε-Caprolactone and d , l -Lactide

Wahlberg, J., Persson, P. V., Olsson, T., Hedenström, E., & Iversen, T. (2003) · Biomacromolecules · doi:10.1021/bm0340725 · Cited by 45 · see citing works

Single crystals morphology of biodegradable double crystalline PLLA-b-PCL diblock copolymers

Casas, M. T., Puiggalí, J., Raquez, J.-M., Dubois, P., Córdova, M. E., & Müller, A. J. (2011) · Polymer · doi:10.1016/j.polymer.2011.08.057 · Cited by 44 · see citing works

Preparation and characterization of poly( L ‐lactide)/ poly(ϵ‐caprolactone) fibrous scaffolds for cartilage tissue engineering

Zhao, J., Yuan, X., Cui, Y., Ge, Q.-B., & Yao, K. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13323 · Cited by 44 · see citing works

Thermo-oxidative degradation of poly(ethylene glycol)/poly(l-lactic acid) blends

Lai, W., & Liau, W. (2003) · Polymer · doi:10.1016/j.polymer.2003.10.035 · Cited by 44 · see citing works

Microstructure of Semicrystalline Poly( l -lactide)/Poly(4-vinylphenol) Blends Evaluated from SAXS Absolute Intensity Measurement

Chen, H., Liu, H.-H., & Lin, J. S. (2000) · Macromolecules · doi:10.1021/ma991504o · Cited by 44 · see citing works

Effect of molecular weight of Poly(ethylene glycol) on plasticization of Poly(ʟ-lactic acid)

Guo, J., Liu, X., Liu, M., Han, M., Liu, Y., & Ji, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.123720 · Cited by 43 · see citing works

Thermomechanical film properties and aging of blends of poly(lactic acid) and malonate oligomers

Ljungberg, N., & Wesslén, B. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21100 · Cited by 43 · see citing works

Porous biodegradable polyester blends of poly( L ‐lactic acid) and poly(ε‐caprolactone): physical properties, morphology, and biodegradation

Tsuji, H., & Horikawa, G. (2006) · Polymer International · doi:10.1002/pi.2150 · Cited by 43 · see citing works

Greatly accelerated crystallization of poly(lactic acid): cooperative effect of stereocomplex crystallites and polyethylene glycol

Wei, X., Bao, R., Cao, Z.-Q., Zhang, L.-Q., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2013) · Colloid & Polymer Science · doi:10.1007/s00396-013-3067-x · Cited by 42 · see citing works

Crystallization and morphological transition of poly(L-lactide)–poly(ε-caprolactone) diblock copolymers with different block length ratios

Han, W., Liao, X., Yang, Q., Li, G.-X., He, B., Zhu, W.-L., & Hao, Z.-H. (2017) · RSC Advances · doi:10.1039/c7ra03496b · Cited by 28 · see citing works

Ageing of different biodegradable polyesters blends mechanical and hygrothermal behavior

Berthé, V., Ferry, L., Bénézet, J., & Bergeret, A. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.008 · Cited by 40 · see citing works

Blends of poly(ε‐caprolactone‐b‐lactic acid) and poly(lactic acid) for hot‐melt applications

Stolt, M., Viljanmaa, M., Södergård, A., & Törmälä, P. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13216 · Cited by 37 · see citing works

Mechanical, thermal and morphological properties of poly(lactic acid) by using star-shaped poly(ε-caprolactone) with POSS core

Doğancı, M. D., Aynali, F., Doğancı, E., & Ozkoc, G. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109316 · Cited by 36 · see citing works

Evaluation of cell affinity on poly( L ‐lactide) and poly(ε‐caprolactone) blends and on PLLA‐b‐PCL diblock copolymer surfaces

Ajami, D., Rodríguez-Silva, M., Sabino, M. A., Castillo, R. V., Müller, A. J., Boschetti‐de‐Fierro, A., Abetz, C., Abetz, V., & Dúbois, P. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31796 · Cited by 36 · see citing works

Enzymatic Degradation of Biodegradable Polyester Composites of Poly( L ‐lactic acid) and Poly(ε‐caprolactone)

Tsuji, H., Kidokoro, Y., & Mochizuki, M. (2006) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600276 · Cited by 36 · see citing works

Fundamental Influences of Induced Crystallization and Phase Separation on the Foaming Behavior of Poly(lactic acid)/Polyethylene Glycol Blends Blown with Compressed CO2

Ren, Q., Wang, J., Zhai, W., & Lee, R. E. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b03266 · Cited by 35 · see citing works

Poly(ethylene glycol‐co‐propylene glycol) as a macromolecular plasticizing agent for polylactide: Thermomechanical properties and aging

Jia, Z., Tan, J., Han, C., Yang, Y., & Dong, L. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30638 · Cited by 35 · see citing works

Fundamental of polymer blends and its thermodynamics

Mishra, J., Tiwari, S. K., Abolhasani, M. M., Azimi, S., & Nayak, G. C. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-101991-7.00002-9 · Cited by 34 · see citing works

Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation

Teng, C., Yang, K., Ji, P., & Yu, M. (2004) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.20412 · Cited by 34 · see citing works

Synthesis and properties of Poly(L-lactide)-Poly(ɛ-caprolactone) multiblock copolymers by the self-polycondensation of diblock macromonomers

Jikei, M., Takeyama, Y., Yamadoi, Y., Shinbo, N., Matsumoto, K., Motokawa, M., Ishibashi, K., & Yamamoto, F. (2015) · Polymer Journal · doi:10.1038/pj.2015.49 · Cited by 33 · see citing works

Peculiar crystallization kinetics of biodegradable poly(lactic acid)/poly(propylene carbonate) blends

Lorenzo, M. L. D., Ovyn, R., Malinconico, M., Rubino, P., & Grohens, Y. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24058 · Cited by 33 · see citing works

Influences of a Dizinc Catalyst and Bifunctional Chain Transfer Agents on the Polymer Architecture in the Ring-Opening Polymerization of ε-Caprolactone

Zhu, Y., Romain, C., Poirier, V., & Williams, C. K. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00225 · Cited by 32 · see citing works

Simultaneous Preparation and Dispersion of Regenerated Cellulose Nanoparticles Using a Facile Protocol of Dissolution–Gelation–Isolation–Melt Extrusion

Zhang, L.-Q., Niu, B., Yang, S.-G., Huang, H., Zhong, G., & Li, Z. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01171 · Cited by 30 · see citing works

Molecular mixing of incompatible polymers through formation of and coalescence from their common crystalline cyclodextrin inclusion compounds

Rusa, C. C., Wei, M., Shuai, X., Bullions, T. A., Wang, X., Rusa, M., Uyar, T., & Tonelli, A. E. (2004) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20272 · Cited by 30 · see citing works

Properties of PLA/PCL particles as vehicles for oral delivery of the androgen hormone 17α-methyltestosterone

Sacchetin, P. S. C., Setti, R. F., Rosa, P. D. T. V. E., & Moraes, Â. M. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.09.071 · Cited by 30 · see citing works

Abiotic degradation of poly(dl-lactide), poly(ɛ-caprolactone) and their blends

Fukushima, K., Feijoo, J. L., & Yang, M. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.07.030 · Cited by 29 · see citing works

Confined crystallization of Poly(ethylene glycol) in spherulites of Poly(L-lactic acid) in a PLLA/PEG blend

Banpean, A., & Sakurai, S. (2021) · Polymer · doi:10.1016/j.polymer.2020.123370 · Cited by 28 · see citing works

Significantly Accelerated Spherulitic Growth Rates for Semicrystalline Polymers through the Layer-by-Layer Film Method

Zhang, Y., Xu, H., Yang, J., Chen, S., Ding, Y., & Wang, Z. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp400580r · Cited by 27 · see citing works

Biopolymer blends for mechanical property gradient 3D printed parts

Jeantet, L., Regazzi, A., Taguet, A., Pucci, M. F., Caro‐Bretelle, A. S., & Quantin, J.-C. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2021.13 · Cited by 27 · see citing works

Formation of Poly(L-lactide) mesophase and its chain mobility dependent kinetics

Liang, Y., Tang, H., Zhong, G., & Li, Z. (2014) · Chinese Journal of Polymer Science · doi:10.1007/s10118-014-1505-y · Cited by 27 · see citing works

Isotactic Polymers with Alternating Lactic Acid and Oxetane Subunits from the Endoentropic Polymerization of a 14-Membered Ring

Zhang, D., Xu, J., Alcazar‐Roman, L. M., Greenman, L., Cramer, C. J., Hillmyer, M. A., & Tolman, W. B. (2004) · Macromolecules · doi:10.1021/ma049571s · Cited by 27 · see citing works

Thermo‐rheological and interfacial properties of polylactic acid/polyethylene glycol blends toward the melt electrospinning ability

Nazari, T., & Garmabi, H. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44120 · Cited by 26 · see citing works

Confined PEO crystallisation in immiscible PEO/PLLA blends

Rufino, T. D. C., & Felisberti, M. I. (2016) · RSC Advances · doi:10.1039/c6ra02406h · Cited by 26 · see citing works

Preparation and characterization of poly (L-lactic acid) and poly(ethylene oxide) blends

Zoppi, R. A., Duek, E. A. D. R., Coraça-Huber, D. C., & Barros, P. P. (2001) · Materials Research · doi:10.1590/s1516-14392001000200014 · Cited by 26 · see citing works

Cyclodextrins as a means to nanostructure and functionalize polymers

Tonelli, A. E. (2007) · Journal of Inclusion Phenomena and Macrocyclic Chemistry · doi:10.1007/s10847-007-9372-6 · Cited by 25 · see citing works

Liquid–liquid phase separation and its effect on the crystallization in polylactic acid / poly(ethylene glycol) blends

Xu, Y., Yu, W., & Zhou, C. (2014) · RSC Advances · doi:10.1039/c4ra08985e · Cited by 25 · see citing works

Structure and mechanical properties of poly(l-lactide)/layered silicate nanocomposites

Kubies, D., Ščudla, J., Puffr, R., Sikora, A., Baldrián, J., Kovářová, J., Šlouf, M., & Rypáček, F. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.10.007 · Cited by 25 · see citing works

Preparation and characterization of PLLA/P(CL-b-LLA) blends by an in situ ring-opening polymerization

He, A., Han, C. C.-C., & Yang, G. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.076 · Cited by 25 · see citing works

Miscible Blends Based on Biodegradable Polymers

Meaurio, E., Hernandez‐Montero, N., Zuza, E., & Sarasua, J.-R. (2014) · Wiley eBooks · doi:10.1002/9783527645602.ch02 · Cited by 24 · see citing works

Higher-order crystalline structures of poly(oxyethylene) in poly(d,l-lactide)/poly(oxyethylene) blends

Tien, N.-D., Hoa, T. P., Mochizuki, M., Saijo, K., Hasegawa, H., Sasaki, S., & Sakurai, S. (2013) · Polymer · doi:10.1016/j.polymer.2013.06.028 · Cited by 23 · see citing works

Plasticization and anti-plasticization effects caused by poly(lactide-ran-caprolactone) addition to double crystalline poly( l -lactide)/poly(ε-caprolactone) blends

Rizzuto, M., Múgica, A., Zubitur, M., Caretti, D., & Müller, A. J. (2016) · CrystEngComm · doi:10.1039/c5ce02559a · Cited by 22 · see citing works

Ternary polymer blends based on poly(lactic acid): Effect of stereo‐regularity and molecular weight

Ross, S., Mahasaranon, S., & Ross, G. M. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41780 · Cited by 22 · see citing works

Fibro‐porous poliglecaprone/polycaprolactone conduits: synergistic effect of composition and in vitro degradation on mechanical properties

Patel, H. N., Garcia, R., Schindler, C., Dean, D. R., Pogwizd, S. M., Singh, R., Vohra, Y. K., & Thomas, V. (2014) · Polymer International · doi:10.1002/pi.4834 · Cited by 22 · see citing works

Mechanical Properties of Poly(L-Lactide) Films Controlled by Blending with Polyesters of Lignin-Derived Stable Metabolic Intermediate, 2-Pyrone-4,6-Dicarboxylic Acid (PDC)

Michinobu, T., Bito, M., Tanimura, M., Katayama, Y., Masai, E., Nakamura, M., Otsuka, Y., Ohara, S., & Shigehara, K. (2009) · Polymer Journal · doi:10.1295/polymj.pj2009133 · Cited by 22 · see citing works

Effect of bisphenol A on the miscibility, phase morphology, and specific interaction in immiscible biodegradable poly(ε‐caprolactone)/poly( L ‐lactide) blends

Kuo, S., Huang, C., Tung, Y., & Chang, F. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23227 · Cited by 22 · see citing works

Synthesis and characterization of poly(β‐hydroxybutyrate) and poly(ϵ‐caprolactone) copolyester by transesterification

Chen, C., Fei, B., Peng, S., Wu, H., Zhuang, Y., Chen, X., Dong, L., & Feng, Z. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10242 · Cited by 22 · see citing works

Complex phase behavior and state of miscibility in Poly(ethylene glycol)/Poly( l ‐lactide‐co‐ε‐caprolactone) Blends

Hernandez‐Montero, N., Ugartemendia, J. M., Amestoy, H., & Sarasua, J.-R. (2013) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23394 · Cited by 10 · see citing works

Study on the Crystallization, Miscibility, Morphology, Properties of Poly(lactic acid)/Poly(ε-caprolactone) Blends

Yeh, J., Wu, C.-J., Tsou, C., Chai, W., Chow, J., Huang, C., Chen, K., & Wu, C.-S. (2009) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550902824390 · Cited by 127 · see citing works

Influence of Blend Composition on Crystallization of Poly(L-Lactic Acid)/Poly (Ethylene Oxide) Crystalline/Crystalline Blends

Liu, X., Zhu, J., Ni, H., & Chen, S. (2014) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2014.996478 · Cited by 2 · see citing works

Disclosing the crystallization behavior and morphology of poly(ϵ‐caprolactone) within poly(ϵ‐caprolactone)/poly(l‐lactide) blends

Han, W., Liao, X., He, B., Yang, Q., & Li, G.-X. (2018) · Polymer International · doi:10.1002/pi.5548 · Cited by 8 · see citing works

The effect of poly(ethylene glycol) mixed with poly( l ‐lactic acid) on the crystallization characteristics and properties of their blends

Athanasoulia, I.-G. I., Christoforidis, M. N., Korres, D. M., & Tarantili, P. A. (2019) · Polymer International · doi:10.1002/pi.5769 · Cited by 18 · see citing works