The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Effect of molecular weight of additives on the conductivity of PEDOT:PSS and efficiency for ITO-free organic solar cells
Abstract
We systematically investigated the effect of the molecular weight of additives on the conductivity of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) by using different concentrations and molecular weights of polyethylene glycol (PEG) and ethylene glycol (EG). The conductivity enhancement depends on both the molecular weight and concentration of PEG used. The conductivity of PEDOT:PSS was enhanced from 0.3 S cm−1 to 805 S cm−1 with 2% PEG but to only 640 S cm−1 with 6% EG. PEGs with molecular weight higher than 400 have too low mobility to impart the required screening effect, and hence, the conductivity enhancement is less. Through FTIR, XPS and AFM investigations, the mechanism for the conductivity enhancement is found to be charge screening between PEDOT and PSS followed by phase separation and reorientation of PEDOT chains leading to bigger and better connected particles. The molecular weight and concentration of PEG also affect solar cell performances even though the conductivities are the same. Due to their high conductivity and high transmittance, ITO-free organic solar cell devices fabricated using PEDOT:PSS treated with 2% PEG anodes exhibited performance almost equal to that of the ITO counterparts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Solid State Physics
Kittel, C., & Fan, H. Y. (1957) · American Journal of Physics · doi:10.1119/1.1934457 · Cited by 22,240
Large-scale pattern growth of graphene films for stretchable transparent electrodes
Kim, K. S., Zhao, Y., Jang, H., Lee, S. Y., Kim, J. M., Kim, K. S., Ahn, J.-H., Kim, P., Choi, J.-Y., & Hong, B. H. (2009) · Nature · doi:10.1038/nature07719 · Cited by 10,452
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Poly(3,4-ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future
Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., & Reynolds, J. R. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200004)12:7<481::aid-adma481>3.0.co;2-c · Cited by 3,420
Transparent, Conductive Carbon Nanotube Films
Wu, Z., Chen, Z., Du, X., Logan, J. M., Sippel, J., Nikolou, M., Kamaras, K., Reynolds, J. R., Tanner, D. B., Hebard, A. F., et al. (2004) · Science · doi:10.1126/science.1101243 · Cited by 2,959
A polymer tandem solar cell with 10.6% power conversion efficiency
You, J., Dou, L., Yoshimura, K., Kato, T., Ohya, K., Moriarty, T., Emery, K., Chen, C.-C., Gao, J., Li, G., et al. (2013) · Nature Communications · doi:10.1038/ncomms2411 · Cited by 2,778
Flexible light-emitting diodes made from soluble conducting polymers
Gustafsson, G., Cao, Y., Treacy, G. M., Klavetter, F., Colaneri, N., & Heeger, A. J. (1992) · Nature · doi:10.1038/357477a0 · Cited by 2,407
Solution-Processed Metal Nanowire Mesh Transparent Electrodes
Lee, J.-Y., Connor, S. T., Cui, Y., & Peumans, P. (2008) · Nano Letters · doi:10.1021/nl073296g · Cited by 1,857
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene)
Kirchmeyer, S., & Reuter, K. (2005) · Journal of Materials Chemistry · doi:10.1039/b417803n · Cited by 1,452
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Ouyang, J., Xu, Q., Chu, C., Yang, Y., Li, G., & Shinar, J. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.001 · Cited by 1,438
Self-citationTandem polymer solar cells featuring a spectrally matched low-bandgap polymer
Dou, L., You, J., Yang, J., Chen, C.-C., He, Y., Murase, S., Moriarty, T., Emery, K., Li, G., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.356 · Cited by 1,416
Gomez De Arco, L., Zhang, Y., Schlenker, C. W., Ryu, K., Thompson, M. E., & Zhou, C. (2010) · ACS Nano · doi:10.1021/nn901587x · Cited by 1,228
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
Kim, J. Y., Jung, J. H., Lee, D. E., & Joo, J. (2002) · Synthetic Metals · doi:10.1016/s0379-6779(01)00576-8 · Cited by 1,072
Organic solar cells with carbon nanotube network electrodes
Rowell, M. W., Topinka, M. A., McGehee, M. D., Prall, H.-J., Dennler, G., Sariciftci, N. S., Hu, L., & Gruner, G. (2006) · Applied Physics Letters · doi:10.1063/1.2209887 · Cited by 1,010
Efficient and Flexible ITO‐Free Organic Solar Cells Using Highly Conductive Polymer Anodes
Na, S., Kim, S., Jo, J., & Kim, D. (2008) · Advanced Materials · doi:10.1002/adma.200800338 · Cited by 882
Carbon nanotube films for transparent and plastic electronics
Gruner, G. (2006) · Journal of Materials Chemistry · doi:10.1039/b603821m · Cited by 567
Organic Solar Cells Using Nanoimprinted Transparent Metal Electrodes
Kang, M., Kim, M., Kim, J., & Guo, L. J. (2008) · Advanced Materials · doi:10.1002/adma.200800750 · Cited by 524
Huang, J., Miller, P. F., Wilson, J. S., de Mello, A. J., de Mello, J. C., & Bradley, D. D. C. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400073 · Cited by 517
Polymer Photovoltaic Cells with Conducting Polymer Anodes
Zhang, F., Johansson, M., Andersson, M. R., Hummelen, J. C., & Inganäs, O. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020503)14:9<662::aid-adma662>3.0.co;2-n · Cited by 500
Solar cells with one-day energy payback for the factories of the future
Espinosa, N., Hösel, M., Angmo, D., & Krebs, F. C. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02728j · Cited by 496
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
PEDOT Nanocrystal in Highly Conductive PEDOT:PSS Polymer Films
Takano, T., Masunaga, H., Fujiwara, A., Okuzaki, H., & Sasaki, T. (2012) · Macromolecules · doi:10.1021/ma300120g · Cited by 426
Zhu, R., Chung, C.-H., Cha, K. C., Yang, W., Zheng, Y. B., Zhou, H., Song, T.-B., Chen, C.-C., Weiss, P. S., Li, G., et al. (2011) · ACS Nano · doi:10.1021/nn203576v · Cited by 400
Azzopardi, B., Emmott, C. J. M., Urbina, A., Krebs, F. C., Mutale, J., & Nelson, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01766g · Cited by 320
Xia, Y., & Ouyang, J. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900708x · Cited by 261
Polymeric Material with Metal-Like Conductivity for Next Generation Organic Electronic Devices
Fabretto, M. V., Evans, D. R., Mueller, M., Zuber, K., Hojati-Talemi, P., Short, R. D., Wallace, G. G., & Murphy, P. J. (2012) · Chemistry of Materials · doi:10.1021/cm302899v · Cited by 245
Xia, Y., Zhang, H., & Ouyang, J. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01593h · Cited by 223
Xia, Y., & Ouyang, J. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300881m · Cited by 173
Modified buffer layers for polymer photovoltaic devices
Ko, C.-J., Lin, Y.-K., Chen, F., & Chu, C. (2007) · Applied Physics Letters · doi:10.1063/1.2437703 · Cited by 164
Self-citationNatural resource limitations to terawatt-scale solar cells
Tao, C., Jiang, J., & Tao, M. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.06.013 · Cited by 148
Pó, R., Carbonera, C., Bernardi, A., Tinti, F., & Camaioni, N. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.12.022 · Cited by 146
Huang, J. H., Kekuda, D., Chu, C., & Ho, K. (2009) · Journal of Materials Chemistry · doi:10.1039/b822729b · Cited by 101
Self-citation
Cited by
Structural control of mixed ionic and electronic transport in conducting polymers
Rivnay, J., Inal, S., Collins, B. A., Sessolo, M., Stavrinidou, E., Strakosas, X., Tassone, C., Delongchamp, D. M., & Malliaras, G. G. (2016) · Nature Communications · doi:10.1038/ncomms11287 · Cited by 939
Thermal Conductivity and Elastic Constants of PEDOT:PSS with High Electrical Conductivity
Liu, J., Wang, X., Li, D., Coates, N. E., Segalman, R. A., & Cahill, D. G. (2015) · Macromolecules · doi:10.1021/ma502099t · Cited by 308
Ouyang, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404113n · Cited by 296
Cui, Y., Zhang, F., Chen, G., Yao, L., Zhang, N., Liu, Z., Li, Q., Zhang, F., Cui, Z., Zhang, K., et al. (2021) · Advanced Materials · doi:10.1002/adma.202100221 · Cited by 114
Hu, Z., Liang, Y., Fan, S., Niu, Q., Geng, J., Huang, Q., Hsiao, B. S., Chen, H., Yao, X., & Zhang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202410007 · Cited by 55
Metadata
- Authors
- Alemu Mengistie, D., Wang, P.-C., & Chu, C.-W.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 34
- Pages
- 9907
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2126530381
- Cited by
- 316
- References
- 35
- FWCI
- 15.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.