The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Steam electrolysis by solid oxide electrolysis cells (SOECs) with proton-conducting oxides
Abstract
Energy crisis and environmental problems caused by the conventional combustion of fossil fuels boost the development of renewable and sustainable energies. H2 is regarded as a clean fuel for many applications and it also serves as an energy carrier for many renewable energy sources, such as solar and wind power. Among all the technologies for H2 production, steam electrolysis by solid oxide electrolysis cells (SOECs) has attracted much attention due to its high efficiency and low environmental impact, provided that the needed electrical power is generated from renewable sources. However, the deployment of SOECs based on conventional oxygen-ion conductors is limited by several issues, such as high operating temperature, hydrogen purification from water, and electrode stability. To avoid these problems, proton-conducting oxides are proposed as electrolyte materials for SOECs. This review paper provides a broad overview of the research progresses made for proton-conducting SOECs, summarizing the past work and finding the problems for the development of proton-conducting SOECs, as well as pointing out potential development directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Minh, N. Q. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb03645.x · Cited by 3,839
An overview of hydrogen production technologies
Holladay, J. D., Hu, J., King, D. L., & Wang, Y. (2009) · Catalysis Today · doi:10.1016/j.cattod.2008.08.039 · Cited by 3,447
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
Lowering the Temperature of Solid Oxide Fuel Cells
Wachsman, E. D., & Lee, K. T. (2011) · Science · doi:10.1126/science.1204090 · Cited by 2,554
Kreuer, K. D. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022802.091825 · Cited by 2,395
IWAHARA, H., ESAKA, T., UCHIDA, H., & MAEDA, N. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90113-2 · Cited by 1,485
Recent advances in high temperature electrolysis using solid oxide fuel cells: A review
Laguna-Bercero, M. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.019 · Cited by 1,156
Nanomaterials for renewable energy production and storage
Chen, X., Li, C., Grätzel, M., Kostecki, R., & Mao, S. S. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35230c · Cited by 1,015
New approaches to hydrogen storage
Graetz, J. (2009) · Chem. Soc. Rev. · doi:10.1039/b718842k · Cited by 1,001
Materials challenges toward proton-conducting oxide fuel cells: a critical review
Fabbri, E., Pergolesi, D., & Traversa, E. (2010) · Chemical Society Reviews · doi:10.1039/b902343g · Cited by 937
Self-citationMalavasi, L., Fisher, C. A. J., & Islam, M. S. (2010) · Chemical Society Reviews · doi:10.1039/b915141a · Cited by 895
Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC)
NI, M., LEUNG, M., & LEUNG, D. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.02.048 · Cited by 796
Proton Conduction in Sintered Oxides Based on BaCeO3
Iwahara, H., Uchida, H., Ono, K., & Ogaki, K. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095649 · Cited by 789
Protonic conduction in Zr-substituted BaCeO3
Katahira, K., Kohchi, Y., Shimura, T., & Iwahara, H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00777-3 · Cited by 750
Chemical stability and proton conductivity of doped BaCeO3–BaZrO3 solid solutions
Ryu, K. H., & Haile, S. M. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00196-4 · Cited by 719
Ba(Zr0.1Ce0.7Y0.2)O3–δ as an Electrolyte for Low‐Temperature Solid‐Oxide Fuel Cells
Zuo, C., Zha, S., Liu, M., Hatano, M., & Uchiyama, M. (2006) · Advanced Materials · doi:10.1002/adma.200601366 · Cited by 660
Enhanced Sintering of Yttrium‐Doped Barium Zirconate by Addition of ZnO
Babilo, P., & Haile, S. M. (2005) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2005.00449.x · Cited by 632
Pergolesi, D., Fabbri, E., D’Epifanio, A., Di Bartolomeo, E., Tebano, A., Sanna, S., Licoccia, S., Balestrino, G., & Traversa, E. (2010) · Nature Materials · doi:10.1038/nmat2837 · Cited by 576
Self-citationFabbri, E., Bi, L., Pergolesi, D., & Traversa, E. (2011) · Advanced Materials · doi:10.1002/adma.201103102 · Cited by 550
Self-citationProton conduction in rare-earth ortho-niobates and ortho-tantalates
Haugsrud, R., & Norby, T. (2006) · Nature Materials · doi:10.1038/nmat1591 · Cited by 541
FABBRI, E., DEPIFANIO, A., DIBARTOLOMEO, E., LICOCCIA, S., & TRAVERSA, E. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.04.002 · Cited by 524
Self-citationHigh Total Proton Conductivity in Large-Grained Yttrium-Doped Barium Zirconate
Yamazaki, Y., Hernandez-Sanchez, R., & Haile, S. M. (2009) · Chemistry of Materials · doi:10.1021/cm900208w · Cited by 523
Towards an electricity-powered world
Armaroli, N., & Balzani, V. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01249e · Cited by 488
A review on exergy comparison of hydrogen production methods from renewable energy sources
Christopher, K., & Dimitrios, R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee01098d · Cited by 469
Highly efficient high temperature electrolysis
Hauch, A., Ebbesen, S. D., Jensen, S. H., & Mogensen, M. (2008) · Journal of Materials Chemistry · doi:10.1039/b718822f · Cited by 458
Norby, T., Widerøe, M., Glöckner, R., & Larring, Y. (2004) · Dalton Transactions · doi:10.1039/b403011g · Cited by 440
Tao, S., & Irvine, J. T. S. (2006) · Advanced Materials · doi:10.1002/adma.200502098 · Cited by 417
Non-stoichiometry, grain boundary transport and chemical stability of proton conducting perovskites
Haile, S. M., Staneff, G., & Ryu, K. H. (2001) · Journal of Materials Science · doi:10.1023/a:1004877708871 · Cited by 364
A Novel Composite Cathode for Low‐Temperature SOFCs Based on Oxide Proton Conductors
Yang, L., Zuo, C., Wang, S., Cheng, Z., & Liu, M. (2008) · Advanced Materials · doi:10.1002/adma.200702762 · Cited by 356
Tsekouras, G., Neagu, D., & Irvine, J. T. S. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee22547f · Cited by 351
Degradation phenomena in a solid oxide electrolysis cell after 9000 h of operation
Tietz, F., Sebold, D., Brisse, A., & Schefold, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.061 · Cited by 344
Conductivity studies of dense yttrium-doped BaZrO3 sintered at 1325°C
Tao, S., & Irvine, J. T. S. (2007) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2007.09.027 · Cited by 307
Fabbri, E., Bi, L., Tanaka, H., Pergolesi, D., & Traversa, E. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001540 · Cited by 254
Self-citationPerformance and Durability of Solid Oxide Electrolysis Cells
Hauch, A., Jensen, S. H., Ramousse, S., et al. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2216562 · Cited by 246
Stability of BaCeO3‐Based Proton Conductors in Water‐Containing Atmospheres
Bhide, S. V., & Virkar, A. V. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391888 · Cited by 218
Direct synthesis of methane from CO2/H2O in an oxygen-ion conducting solid oxide electrolyser
Xie, K., Zhang, Y., Meng, G., & Irvine, J. T. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01035b · Cited by 189
He, F., Song, D., Peng, R., Meng, G., & Yang, S. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.12.079 · Cited by 183
Sun, W., Liu, M., & Liu, W. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201201062 · Cited by 181
Oxide-ionic and protonic conductors based on perovskite-type oxides and their possible applications
IWAHARA, H. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90095-7 · Cited by 176
Yang, X., & Irvine, J. T. S. (2008) · Journal of Materials Chemistry · doi:10.1039/b800163d · Cited by 176
Instability of BaCeO3 in H 2 O ‐Containing Atmospheres
Tanner, C. W., & Virkar, A. V. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836647 · Cited by 167
Proton exchange membrane electrolysis sustained by water vapor
Spurgeon, J. M., & Lewis, N. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01203g · Cited by 161
Sun, Z., Fabbri, E., Bi, L., & Traversa, E. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp01470b · Cited by 152
Self-citationIntermediate temperature solid oxide electrolysis cell using LaGaO3 based perovskite electrolyte
Ishihara, T., Jirathiwathanakul, N., & Zhong, H. (2010) · Energy & Environmental Science · doi:10.1039/b915927d · Cited by 134
Electrochemical reduction of CO2 in a proton conducting solid oxide electrolyser
Xie, K., Zhang, Y., Meng, G., & Irvine, J. T. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm02205e · Cited by 132
An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3−δ thin electrolyte prepared with a suspension spray
Xie, K., Ma, Q., Lin, B., Jiang, Y., Gao, J., Liu, X., & Meng, G. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.059 · Cited by 125
Bi, L., Zhang, S., Fang, S., Tao, Z., Peng, R., & Liu, W. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.08.024 · Cited by 120
Self-citationIWAHARA, H., Esaka, T., Uchida, H., YAMAUCHI, T., & Ogaki, K. (1986) · Solid State Ionics · doi:10.1016/0167-2738(86)90299-7 · Cited by 118
Sun, Z., Fabbri, E., Bi, L., & Traversa, E. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04795.x · Cited by 107
Self-citationConcentrated solar power for renewable electricity and hydrogen production from water—a review
Coelho, B., Oliveira, A. C., & Mendes, A. M. M. (2010) · Energy & Environmental Science · doi:10.1039/b922607a · Cited by 99
A new stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells
Xie, K., Yan, R., Chen, X., Dong, D., Wang, S., Liu, X., & Meng, G. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.05.036 · Cited by 97
Cobalt-doped BaZrO3: A single phase air electrode material for reversible solid oxide cells
Rao, Y., Zhong, S., He, F., Wang, Z., Peng, R., & Lu, Y. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.05.022 · Cited by 96
Voloshin, Y. Z., Dolganov, A. V., Varzatskii, О. А., & Bubnov, Y. N. (2011) · Chemical Communications · doi:10.1039/c1cc12239h · Cited by 95
Gan, Y., Zhang, J., Li, Y., Li, S., Xie, K., & Irvine, J. T. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.018212jes · Cited by 94
Zhou, W., Shao, Z., Ran, R., Gu, H., Jin, W., & Xu, N. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.02242.x · Cited by 82
Solid oxide proton conducting steam electrolysers
Stuart, P. A., Unno, T., Kilner, J. A., & Skinner, S. J. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.01.067 · Cited by 81
Fabbri, E., Markus, I. M., Bi, L., Pergolesi, D., & Traversa, E. (2011) · Solid State Ionics · doi:10.1016/j.ssi.2011.08.019 · Cited by 79
Self-citationIntermediate temperature steam electrolysis using strontium zirconate-based protonic conductors
Sakai, T., Matsushita, S., Matsumoto, H., Okada, S., HASHIMOTO, S., & Ishihara, T. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.10.011 · Cited by 68
Fabbri, E., Oh, T., Licoccia, S., Traversa, E., & Wachsman, E. D. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.3005781 · Cited by 60
Self-citationElectrolysis of CO2 in a proton conducting membrane
Ruiz‐Trejo, E., & Irvine, J. T. S. (2013) · Solid State Ionics · doi:10.1016/j.ssi.2013.05.021 · Cited by 51
Proton-conducting oxide and applications to hydrogen energy devices
Matsumoto, H., Sakai, T., & Okuyama, Y. (2012) · Pure and Applied Chemistry · doi:10.1351/pac-con-12-07-11 · Cited by 46
Sakai, T., Matsumoto, H., Kudo, T., Yamamoto, R., Niwa, E., Okada, S., Hashimoto, S., Sasaki, K., & Ishihara, T. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.06.013 · Cited by 27
Bi, L., & Traversa, E. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.09.011 · Cited by 26
Self-citationSakai, T., Matsushita, S., Hyodo, J., Okuyama, Y., Matsuka, M., Ishihara, T., & Matsumoto, H. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.04.102 · Cited by 9
Cited by
Fundamentals and Catalytic Applications of CeO 2 -Based Materials
Montini, T., Melchionna, M., Monai, M., & Fornasiero, P. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00603 · Cited by 2,766
Gür, T. M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01419a · Cited by 2,566
Artz, J., Müller, T. E., Thenert, K., Kleinekorte, J., Meys, R., Sternberg, A., Bardow, A., & Leitner, W. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00435 · Cited by 2,436
Zheng, Y., Wang, J., Yu, B., Zhang, W., Chen, J., Qiao, J., & Zhang, J. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00403b · Cited by 782
Electrocatalysts for the generation of hydrogen, oxygen and synthesis gas
Sapountzi, F. M., Gracia, J. M., Weststrate, C. J. (.-J., Fredriksson, H. O. A., & Niemantsverdriet, J. W. (. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.09.001 · Cited by 765
Metadata
- Authors
- Bi, L., Boulfrad, S., & Traversa, E.
- Venue
- Chem. Soc. Rev.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014-08-18
- Volume
- 43
- Issue
- 24
- Pages
- 8255-8270
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2149892921
- Cited by
- 464
- References
- 65
- FWCI
- 1.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.