CoChat

Product quality and catalyst deactivation in a four day catalytic fast pyrolysis production run

Open access

The DOI matches its Crossref record; 41 of the 42 references it cites were found in a registry or an index.

Abstract

Catalytic fast pyrolysis of pine sawdust was successfully carried out in VTT's 20 kg h−1 Process Development Unit using a spray dried HZSM-5 catalyst. Approximately 250 kg of partially deoxygenated pyrolysis oil was produced over a period of four days. The catalytically produced pyrolysis oil had an average moisture content of 8.3 wt%, and average carbon and oxygen contents of 72.0 and 21.5 wt% on a dry basis, respectively. Approximately 24% of the original biomass carbon was present in the pyrolysis oil, whereas 14% of carbon was in the form of aqueous side products, which totaled approximately 600 kg. The pyrolysis oil contained a high amount of lignin derived water-insoluble material, as well as 6.4 wt% of aromatic hydrocarbons. The majority of the carbohydrate derived products, i.e. acids, aldehydes, ketones and sugar-type compounds, were found in the aqueous product fraction. While the quality of pyrolysis oil remained quite stable during the four day experiment, distinct changes were observed in the properties and the behavior of the catalyst. Coke formation was heaviest at the beginning of the experiment, and then subsided over time. Catalyst micropore area and volume also decreased during the experiment. This transformation was accompanied by apparent changes in the crystallinity and the structure of the catalyst. Scanning electron microscope images of the catalyst also revealed clear physical damage to the particles. Biomass alkali metals also deposited on the catalyst, and the spent catalyst contained a total of 1.1 wt% of Ca, K, Mg and P after the experiment. A linear correlation was observed between catalyst alkali metal content and acidity, which indicated that biomass alkalis substituted the proton functionalities of the HZSM-5 acid sites.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1039/c4gc00571f

Cites

41 of 41 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Oil fraction carbon and oxygen content (wt%, dry basis) as a function of time-on-stream.
Fig. 1 Oil fraction carbon and oxygen content (wt%, dry basis) as a function of time-on-stream.CC-BY · From the PDF
Fig. 2 Conceptual representation of overall liquid product collection from catalytic fast pyrolysis: (1) CFP oil (250 kg); (2) CFP aqueous fraction (520 kg); (3) condensate aqueous fraction (90 kg).
Fig. 2 Conceptual representation of overall liquid product collection from catalytic fast pyrolysis: (1) CFP oil (250 kg); (2) CFP aqueous fraction (520 kg); (3) condensate aqueous fraction (90 kg).CC-BY · From the PDF
Fig. 3 Van Krevelen plot for pyrolysis oils and their water-insoluble (WIS) fractions produced in fast pyrolysis (FP) and catalytic fast pyrolysis (CFP).
Fig. 3 Van Krevelen plot for pyrolysis oils and their water-insoluble (WIS) fractions produced in fast pyrolysis (FP) and catalytic fast pyrolysis (CFP).CC-BY · From the PDF
Fig. 4 Solvent fractionation of CFP oil, CFP aqueous fraction and typical FP oil from pine. Relative amounts of product fractions are included for the two phase CFP product.
Fig. 4 Solvent fractionation of CFP oil, CFP aqueous fraction and typical FP oil from pine. Relative amounts of product fractions are included for the two phase CFP product.CC-BY · From the PDF
Fig. 5 Catalyst coke content (wt%) as a function of time-on-stream.
Fig. 5 Catalyst coke content (wt%) as a function of time-on-stream.CC-BY · From the PDF
Fig. 6 Alkali metal content (K, Ca, P, Mg) of the catalyst as a function of time-on-stream.
Fig. 6 Alkali metal content (K, Ca, P, Mg) of the catalyst as a function of time-on-stream.CC-BY · From the PDF
Fig. 7 Catalyst overall acidity (mmol NH3 g -1 of catalyst) as a function of catalyst alkali metal content (wt% of K, Ca, P, Mg).
Fig. 7 Catalyst overall acidity (mmol NH3 g -1 of catalyst) as a function of catalyst alkali metal content (wt% of K, Ca, P, Mg).CC-BY · From the PDF
Fig. 8 SEM images of the fresh catalyst, the catalyst at the start of the pyrolysis (TOS 0 h) and the spent catalyst sample.
Fig. 8 SEM images of the fresh catalyst, the catalyst at the start of the pyrolysis (TOS 0 h) and the spent catalyst sample.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 159

Metadata

Authors
Paasikallio, V., Lindfors, C., Kuoppala, E., Solantausta, Y., Oasmaa, A., Lehto, J., & Lehtonen, J.
Affiliations
  • VTT Technical Research Centre of Finland (FI)
  • Aalto University (FI)
Corresponding author
Paasikallio, Ville
Venue
Green Chemistry
Published
2014
Volume
16
Issue
7
Pages
3549
ISSN
  • 1463-9262 (ISSN-L)
  • 1463-9270
OpenAlex
W2024146100
Cited by
154
References
42
Citations by year
2026: 6 · 2025: 8 · 2024: 9 · 2023: 9 · 2022: 11 · 2021: 17 · 2020: 16 · 2019: 16 · 2018: 21 · 2017: 15 · 2016: 12 · 2015: 13 · 2014: 1
FWCI
7.09
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
Green Chemistry (publishedVersion, cc-by)
Funders
Tekes
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
  • Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
Keywords
catalytic fast pyrolysis, pine sawdust, HZSM-5 catalyst, catalyst deactivation, pyrolysis oil quality, coke formation, catalyst acidity, spent catalyst characterization, biomass conversion

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.