CoChat

A 3D hybrid of layered MoS 2 /nitrogen-doped graphene nanosheet aerogels: an effective catalyst for hydrogen evolution in microbial electrolysis cells

Open access

The DOI matches its Crossref record; 43 of the 44 references it cites were found in a registry or an index; none of the 14 sources its claims cite is checked for support yet.

Abstract

A novel 3D hybrid of layered MoS 2 /nitrogen-doped graphene nanosheet aerogels exhibits significantly enhanced catalytic activity for bio-electrochemical hydrogen evolution.

Overview

CoChat Summary

TL;DR

The authors synthesized a 3D hybrid of layered MoS₂ nanosheets and nitrogen-doped graphene aerogels (3D MoS₂/N-GAs) via a hydrothermal route and used it as a cathode catalyst for hydrogen evolution in microbial electrolysis cells. The hybrid outperformed bare MoS₂ nanosheets and N-GAs alone and approached Pt/C performance in MECs.

Key findings

  • In MECs at an applied 0.8 V, the 3D MoS₂/N-GA cathode produced a peak current density of 0.36 mA cm⁻² and a hydrogen production rate of 0.19 m³ H₂ m⁻³ d⁻¹ — about 1.29× and 1.44× the current of MoS₂-NS (0.28 mA cm⁻²) and N-GAs (0.25 mA cm⁻²), and close to Pt/C (0.40 mA cm⁻²); the H₂ rate exceeded MoS₂-NS and N-GAs by more than 3.17× and 2.71×, respectively.
  • In three-electrode HER tests in 100 mM PBS, the hybrid had an onset overpotential of 236 mV (vs 337 mV for MoS₂-NS and 495 mV for N-GAs), a current density of 40.7 mA cm⁻² at −0.4 V (vs 11.4 and 4.9 mA cm⁻²), and a Tafel slope of 230 mV per decade (vs 372 and 487 mV per decade).
  • The hybrid had a BET surface area of ~43 m² g⁻¹ with an average pore size of 71 nm and a MoS₂ content of 29.0 wt%; it retained most of its current over 6000 s of electrolysis and showed the highest Coulombic efficiency (~24.28%) among the four samples tested.
  • Despite a smaller BET area than N-GAs (83 m² g⁻¹) and roughly 1/4 the loading of Pt/C, the hybrid reached a peak current almost equal to Pt/C, which the authors attribute to 3D conductive networks, porosity, and synergic effects between MoS₂ nanosheets and N-GAs.

Methods

  • Synthesis: MoS₂ nanosheets were made by liquid exfoliation of layered MoS₂, then mixed with graphene oxide and ammonia and hydrothermally self-assembled into the 3D MoS₂/N-GA hybrid, simultaneously reducing GO and incorporating nitrogen.
  • Characterization: FESEM, TEM/HRTEM, SAED, AFM, EDX, TGA, XRD, XPS, Raman, and nitrogen adsorption–desorption (BET); the hybrid showed 4–7 layer MoS₂ with 0.63 nm lattice spacing and ~1 nm thick N-GA sheets.
  • Electrochemical testing: linear sweep voltammetry, Tafel plots, and EIS in neutral 100 mM PBS using a three-electrode setup (iR-corrected), plus MEC tests at 0.8 V applied voltage with a 1 Ω external resistor comparing MoS₂-NS, N-GAs, 3D MoS₂/N-GAs, and Pt/C cathodes.

Limitations

  • Stated by the paper: the detailed contributions of the aerogel structure, layered MoS₂ active sites, and 3D N-GA networks to the performance "are currently being investigated"; the MEC with the hybrid generated less hydrogen than Pt/C because of its lower cathodic efficiency; the slow current decline over 6000 s is attributed to continuous H⁺ consumption and possible loss of dropcast material from the electrode.
  • Evident from the text: the N 1s XPS signal could not be distinguished from the Mo 2p₃/₂ signal in the MoS₂-containing hybrid, so nitrogen doping was inferred indirectly from a MoS₂-free control; the hybrid's BET surface area (43 m² g⁻¹) is smaller than that of N-GAs alone (83 m² g⁻¹).

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1039/c4ta02254h

Cites

43 of 43 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 0 Not valid · 6 Not checked · 21 Own results and interpretations

9 more claims

Create a free account to see all 27 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 12
  • Probably not a substantial claim. 1

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 43 references

Cited by

Items 201–220 of 220

Metadata

Authors
Hou, Y., Zhang, B., Wen, Z., Cui, S., Guo, X., He, Z., & Chen, J.
Affiliations
  • University of Wisconsin–Milwaukee (US)
  • Chinese Academy of Sciences (CN)
  • Virginia Tech (US)
Corresponding author
  • He, Zhen
  • Chen, Junhong
Venue
J. Mater. Chem. A
Published
2014
Volume
2
Issue
34
Pages
13795-13800
ISSN
  • 2050-7488 (ISSN-L)
  • 2050-7496
OpenAlex
W2117877184
Cited by
221
References
44
Citations by year
2026: 6 · 2025: 11 · 2024: 9 · 2023: 16 · 2022: 7 · 2021: 13 · 2020: 21 · 2019: 34 · 2018: 23 · 2017: 22 · 2016: 30 · 2015: 23 · 2014: 6
FWCI
8.89
Type
journal article
Language
en
Open access
Licence
cc-by-nc
Locations
  • Journal of Materials Chemistry A (publishedVersion, cc-by-nc)
  • VTechWorks (Virginia Tech) (submittedVersion, cc-by-nc)
Funders
  • U.S. Department of Energy (DEEE0003208)
  • University of Wisconsin-Milwaukee
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Environmental Science › Environmental Engineering › Microbial Fuel Cells and Bioremediation
  • Physical Sciences › Chemistry › Analytical Chemistry › Electrochemical sensors and biosensors
Keywords
MoS2, nitrogen-doped graphene, aerogels, hydrogen evolution reaction, microbial electrolysis cells, electrocatalysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.