Biodegradable polylactide based materials with improved crystallinity, mechanical properties and rheological behaviour by introducing a long-chain branched copolymer
The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Abstract
Herein we developed a novel strategy for preparing biodegradable PLA based materials with improved crystallinity, mechanical properties and rheological behaviour by introducing a long-chain branched block copolymer of PLA and PCL.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Furthermore, PLA/PCL-PLA blend with 15 wt % of the PCL-PLA copolymer had much better elongation at break (210.7%) than neat PLA (7.1%).”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [73]
In the citing paper
“Adding the PCL-PLA copolymer to the neat PLA improved its tensile toughness without ill effect on the above-mentioned properties.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [73]
Citations
Cites
Kinetics of Phase Change. I General Theory
Avrami, M. (1939) · The Journal of Chemical Physics · doi:10.1063/1.1750380 · Cited by 11,399
Kinetics of Phase Change. II Transformation-Time Relations for Random Distribution of Nuclei
Avrami, M. (1940) · The Journal of Chemical Physics · doi:10.1063/1.1750631 · Cited by 8,714
Rheology of non-Newtonian fluids: A new flow equation for pseudoplastic systems
Cross, M. M. (1965) · Journal of Colloid Science · doi:10.1016/0095-8522(65)90022-x · Cited by 2,083
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Cameron, D. J. A., & Shaver, M. P. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00091d · Cited by 421
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Research works printed but not linked: 1
- Xu, 2010, Polymer, 51, 730, 10.1016/j.polymer.2009.12.017 · DOI · Paper page
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Star-shaped and branched polylactides: Synthesis, characterization, and properties
Michalski, A., Brzezinski, M., Lapienis, G., & Biela, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.004 · Cited by 158
Zhao, X., Yu, J., Liang, X., Huang, Z., Li, J., & Peng, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123581 · Cited by 153
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
“Bifunctional cyclic ester Enhance PLA toughness [237] Polymerized soybean oil Improve the toughness [147] Blending with Polyvinyl acetate Increase in tensile strength and elongation at break [65] Polyurethane Elongation at break of more than 363% [126] Poly(e-caprolactone) (PCL) High improvement in mechanical properti…”
BackgroundGreen Copolymers Based on Poly(Lactic Acid)—Short Review
Stefaniak, K., & Masek, A. (2021) · Materials · doi:10.3390/ma14185254 · Cited by 109
Ranakoti, L., Gangil, B., Bhandari, P., Singh, T., Sharma, S. K., Singh, J., & Singh, S. (2023) · Molecules · doi:10.3390/molecules28020485 · Cited by 120
Recent Approaches to the Plasticization of Poly(lactic Acid) (PLA) (A Review)
Mastalygina, E. E., & Aleksanyan, K. V. (2023) · Polymers · doi:10.3390/polym16010087 · Cited by 110
Crystallization modification of poly(lactide) by using nucleating agents and stereocomplexation
Jiang, L., Shen, T., Xu, P., Zhao, X., Li, X., Dong, W., Ma, P., & Chen, M. (2015) · e-Polymers · doi:10.1515/epoly-2015-0179 · Cited by 94
Zhao, X., Li, J., Liu, J., Zhou, W., & Peng, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.10.154 · Cited by 89
Fan, Y., Huang, X., Wang, G., & Jiang, P. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b09619 · Cited by 91
Jing, M., Che, J., Xu, S., Liu, Z., & Fu, Q. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.11.134 · Cited by 77
Yang, D., Wu, C., Wu, G., Chen, S., & Wang, Y. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c02181 · Cited by 73
Self-citationRaza, M. A., Sharma, M. K., Nagori, K., Jain, P., Ghosh, V., Gupta, U. D., & Ajazuddin, M. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124734 · Cited by 77
Yang, D.-D., Liu, W., Zhu, H.-M., Wu, G., Chen, S.-C., Wang, X.-L., & Wang, Y.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06343 · Cited by 60
Self-citationSynthesis and Rheology of Branched Multiblock Polymers Based on Polylactide
Mannion, A. M., Bates, F. S., & Macosko, C. W. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00792 · Cited by 58
Wang, Y., Wei, Z., & Li, Y. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.10.019 · Cited by 40
Self-citationSachan, R., Warkar, S. G., & Purwar, R. (2022) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2022.2113890 · Cited by 55
“[54] Solution blend of PCL and PLA/PLLA,[55–57] poly (glycolic acid),[58] poly(3-hydroxybutyrate-co-3hydroxyhexanoate),[59] poly(hexylene adipate)[60] and poly(methylmethacrylate)[61] are prepared either by chloroform or mixture of chloroform with dimethylformamide, 1–4, dioxane, acetone or ethanol because of ease of…”
BackgroundInfluentialLu, J., Wu, L., & Li, B. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44544 · Cited by 37
PLA-Based Biodegradable Polymer from Synthesis to the Application
Wi, J., Choi, J., & Lee, S. Y. (2025) · Polymers · doi:10.3390/polym18010121 · Cited by 40
“Yang and co-workers proposed a strategy in which a long-chain-branched copolymer (LB-PCLA) composed of PLA and PCL is introduced to simultaneously enhance crystallinity, mechanical properties, and rheological behavior [150].”
Toughening of Poly( l -Lactide) with Branched Polycaprolactone: Effect of Chain Length
Yang, X., Liu, S., Yu, E., & Wei, Z. (2020) · ACS Omega · doi:10.1021/acsomega.0c04070 · Cited by 36
Lyu, Y., Chen, Y., Lin, L., Schlarb, A. K., Li, Y., & Shi, X. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107456 · Cited by 37
Singla, R. K., Maiti, S. N., & Ghosh, A. K. (2016) · RSC Advances · doi:10.1039/c5ra24897c · Cited by 26
Doğancı, M. D., Caner, D., Doğancı, E., & Özkoç, G. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50712 · Cited by 24
Li, D., Zhang, S., Zhao, Z., Miao, Z., Zhang, G., & Shi, X. (2023) · Polymers · doi:10.3390/polym15091984 · Cited by 20
Klonos, P. Α., Terzopoulou, Z. N., Zamboulis, A., Valera, M. Á., Mangas, A., Kyritsis, A., Pissis, P., & Bikiaris, D. Ν. (2022) · Soft Matter · doi:10.1039/d2sm00261b · Cited by 23
Scoponi, G., Francini, N., & Athanassiou, A. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202000805 · Cited by 19
Abay, A. K., Gebeyehu, M. B., Lin, H. K., Liu, P. C., Lee, J., Wu, C., Murakami, R.-I., & Chiang, T. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-1091-5 · Cited by 16
“Blending of PLAwith different polymers presents a practical and cost-effective measure in order to improve the brittleness of PLA and acquire toughened products as well as a material that have good impact strength [9–12].”
BackgroundJiang, G., Zhang, J., Ding, J., & Chen, Y. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5279 · Cited by 16
Yang, Z., Liu, S., Li, J., Wu, G., Zhang, M., Li, F., Jia, L., Zhang, Y., Li, H., Liu, X., et al. (2023) · Fibers and Polymers · doi:10.1007/s12221-023-00386-3 · Cited by 14
Utsunomia, C., Matsumoto, K., Date, S., Hori, C., & Taguchi, S. (2017) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2017.03.002 · Cited by 14
Tie, R., Huang, Y., Jin, Y., Sun, J., Tian, H., Xiao, L., Li, G., Wang, L., & Men, S. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02589-w · Cited by 13
Sun, H., Hu, J., Bai, X., Zheng, Z., Feng, Z., Ning, N., Zhang, L., & Tian, M. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.10.012 · Cited by 13
He, L., Song, F., Qi, L.-J., Zhao, X., Wang, X., & Wang, Y. (2020) · Composites Communications · doi:10.1016/j.coco.2020.100543 · Cited by 13
Self-citationTranscrystallization of poly( l -lactic acid) on the surface of reduced graphene oxide fibers
Jing, M., Jiang, H. X., Guo, Y., Wu, Z., & Fu, Q. (2016) · RSC Advances · doi:10.1039/c6ra18762e · Cited by 12
Jang, H., Kwon, S., Kim, S. J., Kim, Y., & Park, S. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms25010055 · Cited by 9
Plasticization of Poly(lactic acid) by Bio-based Plasticizers Derived from Castor Oil
Yang, Y., & Dou, Q. (2025) · Journal of Polymers and the Environment · doi:10.1007/s10924-025-03612-6 · Cited by 8
Chang, Y. F., Chen, Z., & Yang, Y. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04014 · Cited by 8
Yang, B., Zhang, X., Wang, C., Liu, R., Fan, B., Zhang, H., & Sun, H. (2019) · RSC Advances · doi:10.1039/c9ra08133j · Cited by 7
Toward a Greener Bioeconomy: Synthesis and Characterization of Lignin–Polylactide Copolymers
Langletz, T., Grande, P. M., Viell, J., Wolters, D., Tonn, J., Klose, H., Schriever, S., Hoffmann, A., Jupke, A., Gries, T., et al. (2023) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202300187 · Cited by 5
Bibi, G., Jung, Y., Lim, J., & Kim, S. H. (2016) · RSC Advances · doi:10.1039/c6ra21680c · Cited by 5
Synthesis and Characterization of Poly(DL-lactide) Containing Fluorene Structures
Yu, C.-F., Rwei, S., Yang, S., Tsen, W., & Lin, L. (2023) · Polymers · doi:10.3390/polym15112555 · Cited by 5
“…can introduce diverse functional groups into PLA, the selection of co-monomers can involve compounds with higher hydrophilicity or superior biocompatibility, such as lactide, glycolide, polyethylene glycol, and polycaprolactone, to enhance the biocompatibility of the modified polymer [17–22].”
BackgroundSachan, R., & Purwar, R. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55542 · Cited by 2
Polymer-Based Biomaterials and Tissue Engineering
Sabater i Serra, R., & Serrano-Aroca, Á. (2023) · MDPI eBooks · doi:10.3390/books978-3-0365-8236-8
Tribological Performance of Biodegradable Polymers: Comparative Study of PLA, PBS, PHBV and CABPreprint
Arold, L., Herzog, C., Rösel, U., & Drummer, D. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6845211
Xu, C., Yu, J., Fan, Y., Chu, F., Liu, H., & Ramakrishna, S. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c01610
Metadata
- Authors
- Liu, M.-J., Chen, S.-C., Yang, K.-K., & Wang, Y.-Z.
- Affiliations
- Sichuan University (CN)
- Corresponding author
- Chen, Si-Chong
- Yang, Ke-Ke
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2015
- Volume
- 5
- Issue
- 52
- Pages
- 42162-42173
- ISSN
- 2046-2069 (ISSN-L)
- OpenAlex
- W1962943356
- Cited by
- 45
- References
- 53
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 2 · 2023: 9 · 2022: 3 · 2021: 6 · 2020: 3 · 2019: 1 · 2018: 2 · 2017: 4 · 2016: 8 · 2015: 3
- FWCI
- 2.05
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- RSC Advances (publishedVersion)
- Funders
- National Natural Science Foundation of China (21474066, 51421061)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, polycaprolactone, biodegradable polymers, polymer crystallinity, mechanical properties, rheological properties
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.