CO2adsorption on crab shell derived activated carbons: contribution of micropores and nitrogen-containing groups
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Nitrogen-doped activated carbons with high and selective CO2 adsorption are attractive for carbon capture, but the contribution of nitrogen-containing groups to CO2 adsorption has not been clearly elucidated. In this study, crab shells are used as a carbon precursor for the preparation of effective N-containing activated carbons for CO2 adsorption. The activated carbon prepared at a KOH/C mass ratio of 1.5 and activation temperature of 650 °C has the highest CO2 adsorption of 1.57 mmol g−1 at 0.15 bar & 25 °C and 4.37 mmol g−1 at 1 bar & 25 °C. The activated carbon also exhibits better adsorption selectivity for CO2 than conventional activated carbons, and the content of pyrrolic-N in the activated carbons shows a positive relationship with CO2/N2 selectivity. The activated carbons prepared under different activation conditions contain 5.1–8.5% nitrogen in the form of pyridinic-N, pyrrolic-N, quaternary nitrogen, and pyridinic-N-oxide, accounting for at least 0.9–78.2% contribution to CO2 adsorption at 25 °C & 1 bar. About 45.1–47.3% of doped nitrogen is verified to be pyrrolic-N via X-ray photoelectron spectroscopy (XPS) analysis, which is effective for CO2 adsorption. However, the effective micropores are mainly responsible for CO2 adsorption on the well-developed activated carbons via a micropore filling mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Understanding chemical reactions between carbons and NaOH and KOH
Lillo-Ródenas, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2003) · Carbon · doi:10.1016/s0008-6223(02)00279-8 · Cited by 1,199
Wei, J., Zhou, D., Sun, Z., Deng, Y., Xia, Y., & Zhao, D. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202764 · Cited by 931
Anthropogenic greenhouse gas contribution to flood risk in England and Wales in autumn 2000
Pall, P., Aina, T., Stone, D. A., Stott, P. A., Nozawa, T., Hilberts, A. G. J., Lohmann, D., & Allen, M. R. (2011) · Nature · doi:10.1038/nature09762 · Cited by 871
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Hierarchical porous polyacrylonitrile-based activated carbon fibers for CO2 capture
Shen, W., Zhang, S., He, Y., Li, J., & Fan, W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12585k · Cited by 154
Cited by
Biomass derived porous carbon for CO2 capture
Singh, G., Lakhi, K. S., Sil, S., Bhosale, S. V., Kim, I., Albahily, K., & Vinu, A. (2019) · Carbon · doi:10.1016/j.carbon.2019.03.050 · Cited by 555
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Calcium-rich biochar from crab shell: An unexpected super adsorbent for dye removal
Dai, L., Zhu, W., He, L., Tan, F., Zhu, N., Zhou, Q., He, M., & Hu, G. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.07.090 · Cited by 280
Biomass-based carbon materials for CO2 capture: A review
Quan, C., Zhou, Y., Wang, J., Wu, C., & Gao, N. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102373 · Cited by 200
Zhang, X., Wu, J., Yang, H., Shao, J., Wang, X., Chen, Y., Zhang, S., & Chen, H. (2016) · RSC Advances · doi:10.1039/c6ra23748g · Cited by 95
Metadata
- Authors
- Chen, T., Deng, S., Wang, B., Huang, J., Wang, Y., & Yu, G.
- Venue
- RSC Adv.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2015
- Volume
- 5
- Issue
- 60
- Pages
- 48323-48330
- ISSN
- 2046-2069 (ISSN-L)
- OpenAlex
- W1707686184
- Cited by
- 104
- References
- 10
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.