CoChat

Optimizing milling energy for enhancement of solid-state magnesium sulfate (MgSO4) thermal extraction for permanent CO2storage

Atashin, S., Wen, J. Z., Varin, R. A. · 2016 · RSC Adv.
Cited by 10

The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.

Abstract

Mineral carbonation of Mg-silicates via the indirect-dry route is among the most appealing technical approaches for permanent CO2 storage. It brings about the possibility of recycling heat released during exothermic carbonation and it offers a higher rate of conversion through two separate stages: producing of reactive compounds, mainly Mg(OH)2, through solid reactions between Mg-silicates and ammonium sulfates and subsequent carbonation of reactive compounds. Milling is essential to enhance the solid-state reaction rate and increase the conversion percentage. The milling energy, being the major energy consumption of the entire carbonation process, needs to be minimized without sacrifice of its activation purpose. This study focuses on enhancing the kinetics of solid-state magnesium sulfate (MgSO4) thermal extraction from the solid–solid reaction of olivine ((Fe,Mg)2SiO4) and ammonium sulfate ((NH4)2SO4), with optimized milling energy input. This process constitutes the first stage of Mg(OH)2 production for indirect CO2 storage purposes. The mechanical activation of reactants via a high-energy magneto ball milling with a controlled energy input is achieved. The variation of structural parameters such as the particle size, specific surface area (SSA), pore volume, and crystallite size and strain are characterized as a function of milling energy input and the correlation between structural factors and activation energy of extraction is investigated. In addition, the variation in the apparent activation energy of solid-state extraction is examined as a function of milling energy. The optimal amount of milling energy input for increasing the reaction kinetics of MgSO4 extraction is estimated to be about 27.6 kJ g−1 which causes around 34% reduction in the activation energy of MgSO4 solid-state extraction.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1039/c6ra12526c

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 10

Metadata

Authors
Atashin, S., Wen, J. Z., & Varin, R. A.
Venue
RSC Adv.
Published
2016
Volume
6
Issue
73
Pages
68860-68869
ISSN
2046-2069 (ISSN-L)
OpenAlex
W2463047130
Cited by
10
References
13
FWCI
1.02
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.