Emerging nanotechnology approaches for sustainable water treatment and heavy metals removal: a comprehensive review
Open accessThe DOI matches its Crossref record; 241 of the 241 references it cites were found in a registry or an index; 68 of the 323 sources its claims cite were checked for support.
Abstract
Water pollution is a significant worldwide concern, caused mainly by industrialization, urban development, and inadequate waste management, leading to the release of harmful pollutants, especially heavy metals, into water bodies. These pollutants provide significant risks to ecological and public health owing to their toxicity, persistence, and bioaccumulative properties. Traditional water and wastewater treatment methods often inadequately remove these persistent pollutants due to challenges in selectivity, efficiency, and flexibility. Nanotechnology has grown as an effective and innovative method for eliminating pollutants, providing improved materials with distinctive physicochemical characteristics, including large surface area, increased reactivity, and functional tunability. The study systematically examines the utilization of nanotechnology in water and wastewater treatment, focusing on the adsorption-based elimination of heavy metal ions. The article begins with a summary of conventional treatment techniques and their limitations, then addresses adsorption principles, including physisorption and chemisorption processes. The review classifies and critically evaluates various types of nanoadsorbents, such as carbon-based nanocomposites, zeolites, metal and metal oxide nanoparticles, silica nanomaterials, polymer-based materials, metal-organic frameworks, and layered double hydroxides, emphasizing their efficacy under different operational conditions. Furthermore, essent…
Overview
CoChat Summary
## TL;DR
This is a narrative review of nanotechnology approaches for water and wastewater treatment, with a strong focus on adsorption-based heavy metals removal. It argues that nanoadsorbents offer higher capacity, tunability, and reuse potential than conventional adsorbents, but large-scale deployment is still constrained by scalability, regeneration, toxicity, and recovery issues.
## Key findings
- The review concludes that engineered nanomaterials — including carbon-based nanoadsorbents, zeolites, metal and metal oxide nanoparticles, silica nanomaterials, polymer-based nanocomposites, MOFs, and LDHs — show “exceptional adsorption capacities and selectivity” for heavy metal ions.
- Reported examples include 99.5% Zn2+ removal by bar silica nanoparticles in 4 hours at pH 8.2 with an adsorption capacity of 9.1 mg g−1; 99.65% Cd2+ removal by mesoporous silica–calcium phosphate nanocomposites in 30 minutes at pH 6 with 125.63 mg g−1 capacity; and a Fe3O4–Cu–MOF hybrid with 610 mg g−1 Pb2+ adsorption capacity and 93% removal efficiency.
- The paper reports a polyacrylic acid-capped Fe3O4–Cu–MOF hybrid with 610 mg g−1 adsorption capacity for Pb2+ and 93% removal efficiency in aqueous systems.
- It also highlights material-specific examples such as 97.94% Cr(vi) and 98.56% Ni(ii) removal by NH2-functionalized Fe3O4 nanoparticles from 1 ppm tap water, and up to 98% regeneration efficiency for EDTA-functionalized Fe3O4 nanoparticles using 0.5 M HCl across 30 reuse cycles.
## Methods
- The paper is a comprehensive review rather than an experimental study; it synthesizes prior literature on nanotechnology-enabled water treatment, with emphasis on adsorption for heavy metals removal.
- It organizes evidence by treatment class and material family, covering conventional treatment approaches, adsorption theory, nanotechnology applications in wastewater, characterization methods, recycling/regeneration, and multiple nanoadsorbent categories.
- Its main analysis is a comparative narrative assessment of reported adsorption capacities, removal efficiencies, regeneration behavior, and operational conditions drawn from the cited literature.
## Limitations
- The paper explicitly states that major barriers to large-scale use include scalability of synthesis, economic viability, long-term stability, regeneration and reusability, nanotoxicity, and environmental fate issues.
- It also notes practical limitations such as nanoparticle leakage, difficulty recovering nanosized particles, performance loss over repeated cycles, and the need for pilot and industrial studies; these are stated in the text and indicate that most evidence is still laboratory or pilot scale.
- Evident from the text: because this is a review, its conclusions depend on heterogeneous prior studies with differing materials, conditions, and metrics, so direct cross-study comparison is limited.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures























Verification
Claims the paper makes
58 Valid · 8 Not valid · 126 Not checked · 50 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Traditional water and wastewater treatment methods often inadequately remove these persistent pollutants due to challenges in selectivity, efficiency, and flexibility.”
- Also stated in: § Introduction Water is the fundamental component necessary for every living thing on the planet and a valuable resource for the development of human society.1 Ensuring the consistent and dependable availability of uncontaminated and accessible water is widely recognized as an essential purpose of humanistic efforts and continues to be a significant worldwide obstacle. Even though water covers over 71 percent of the Earth's surface, the amount of clean water accessible for utilization remains extremely limited, and the need for water is rising due to the expansion of industrial activity and growing populations.2Fig. 1 depicts the global distribution of water. The primary concern associated with rising water consumption is providing potable water to the necessary fields. In addition to its domestic applications for consumption and use in cooking, pure water is also a crucial resource for various emerging businesses, including food, pharmaceuticals, electronics, and medical areas. However, the accessible freshwater reservoir faces complexity due to diminishing quantities caused by global warming, population growth, and stricter health regulations. Research by the World Health Organization (WHO) reveals that 2.1 billion people lack access to potable water sources, and over 700 million people do not have access to the essential daily demand for potable water. Moreover, approximately 4 billion individuals globally experience water shortages for at least one month yearly.2–5 Overall, eighty percent of health issues globally can be traced back to a contaminated water supply, directly or indirectly. Additionally, nineteen percent of all human deaths can be attributed to diseases associated with pathogenic microbes present in water.6 Furthermore, an alarming number of two million individuals die of diarrheal diseases annually as a direct consequence of the absence of any enhanced sanitary system, and each day, approximately 5000–6000 children lose their lives as a result of diarrhea, a water-based issue. Therefore, an uninterrupted provision of purified water is crucial for our everyday consumption. According to WHO guidelines, drinking water should have undetectable levels of fecal and total coliforms in any 100 mL water sample. The paper, plastic, and metal sectors also rely on providing uncontaminated water for their manufacturing processes. Therefore, individuals can reduce water consumption by gaining a deeper awareness of how water is used and recycled in the production of goods.4,7–9 Polluted water not only has adverse effects on the lives of people but also has harmful effects on biodiversity and ecosystems.10 It is crucial to implement new regulations for water usage in response to the growing strain on water resources, the unpredictable availability of clean water, and the impact of global climate change. The many demands placed on water systems necessitate the utilization or reutilization of alternate water sources, such as saltwater, stormwater, brine water, and recycled household water, particularly in regions with a history of water scarcity.11,12 In addition to these global statistics, several practical cases further illustrate the severity of water pollution. For instance, the Flint water crisis in the United States highlighted the devastating health consequences of lead-contaminated drinking water on local communities.13 Chronic exposure to heavy metals such as arsenic, lead, and cadmium through contaminated water has been strongly associated with gastrointestinal disorders and increased cancer risks, particularly rectal and colorectal cancers.14 In Bangladesh, high levels of naturally occurring arsenic in groundwater continue to affect millions of people, with epidemiological data linking this exposure to gastrointestinal cancers and other severe health effects.14–17 Similarly, in China, long-term exposure to contaminated water containing nitrates, polycyclic aromatic hydrocarbons, and heavy metals has been associated with elevated incidences of digestive system cancers.14,18 These practical examples underscore the urgent need for effective and sustainable treatment strategies to mitigate the health and environmental impacts of water pollution. As a result of the environmental concerns caused by water contamination, many scientists have focused their attention on developing innovative methods for treating wastewater,21 and governments, non-governmental organizations, and environmentalists have established strict regulations and standards to promote environmental conservation and the principles of reuse, reduce, and recycle.22 Various methods have been created so far to reduce the release of wastewater and lessen the risks associated with contaminants. These methods include coagulation/flocculation, membrane filtration, adsorption, oxidation, chemical precipitation, and biological treatment.23,24 Wastewater treatment often incurs substantial expenses due to the necessity of efficiently eliminating the contaminants in the wastewater to render the water safe and appropriate for reuse. Nevertheless, the planning and development of these wastewater treatment methods primarily focus on investigating effluents and treatment standards, disregarding their potential effects on the entire treatment process and sustainability.25 Current treatments do not eliminate contaminants; instead, they either concentrate them or transform them into other forms.26 The progress in nanotechnology presents several possibilities for developing cost-effective and eco-friendly water supply methods. Nanomaterials are anticipated to possess diverse characteristics that provide cost-efficient and highly efficient methods for treating wastewater and water. These techniques would depend less on complex infrastructure for wastewater treatment and could be used with other water treatment processes such as adsorption, coagulation, membrane technology, and photocatalysis.11,27 Nanotechnology-based approaches for water and wastewater treatment have emerged as promising solutions to overcome key challenges in conventional treatment techniques. These advanced technologies provide innovative and efficient mechanisms for pollutant removal, enabling the cost-effective utilization of alternative water sources to enhance water availability. The increasing quantity of scientific articles in this field demonstrates the growing interest and recognition of nanotechnology's potential in addressing complex water pollution issues (as shown in Fig. 2). Alongside advances in synthesis, comprehensive characterization of nanomaterials is essential to validate their unique physiochemical properties and ensure their suitability for water and wastewater treatment applications. Different techniques provide complementary insights: microscopy-based methods (e.g., SEM, TEM, AFM) reveal particle size, morphology, and crystal structure; spectroscopy methods (e.g., FTIR, UV-Vis, XPS) identify surface functional groups and electronic state; diffraction and scattering methods (e.g., XRD, SAXS) confirm crystallinity and phase composition; while surface and stability analyses (e.g., BET, zeta potential, DLS) quantify porosity, surface area, dispersion behavior, and colloidal stability.28–31Fig. 3 illustrates the main characterization techniques commonly employed in nanomaterial research and the properties they reveal. Including these techniques at the early stage of material evaluation is crucial, as particle size, morphology, surface chemistry, and stability directly govern adsorption performance, regeneration potential, and environmental safety. This article provides a comprehensive review of recent advancements in nanotechnologies applications for water and wastewater treatment. It highlights the potential of nanomaterials to overcome the limitations of conventional treatment methods by offering enhanced efficiency, selectivity, and reusability. A detailed comparison between traditional techniques and nanotechnology-based approaches is presented to emphasize the superiority of nanoscale materials in pollutant removal. The review further examines the synthesis, structural properties, and performance of various nanoparticles and nanocomposites, particular focusing on their mechanisms of decontamination. Special attention is given to nanoadsorbents for the removal of heavy metals, with discussions on adsorption processes and the influence of key operational parameters such as solution pH, temperature, contact time, initial metal ion concentration, and adsorbent dosage. Overall, this study underscores the significance of nanotechnology as a sustainable and efficient alternative for water purification. Moreover, recent evidence demonstrating the continued rise in industrial effluent discharge and associated heavy metal pollution highlights the urgent need to develop advanced and cost-effective treatment strategies.32–34 Numerous research groups have investigated diverse methods for treating heavy metal-contaminated wastewater using a wide range of materials.35–37 This review consolidates the most recent progress in employing nanomaterials for heavy metal removal, emphasizing their superior adsorption capacity, regeneration potential, and environmental compatibility compared to conventional adsorbents. The article elaborates on the fundamental principles of nanotechnology, interaction mechanisms between nanomaterials and heavy metal ions, and the types and performance of different nanomaterials utilized for remediation. Furthermore, it identifies knowledge gaps and future perspectives for optimizing nanomaterial design, improving recyclability, and ensuring environmental safety. To the best of our knowledge, this review provides one of the most comprehensive and up-to-date analyses of nanomaterial-based approaches for heavy metal removal, serving as a valuable reference for both researchers and practitioners in developing sustainable water treatment technologies. · plain
“Current treatments do not eliminate contaminants; instead, they either concentrate them or transform them into other forms.26”
§ Emerging nanotechnology approaches for sustainable water treatment and heavy metals removal: a comprehensive review > Abstract Water pollution is a significant worldwide concern, caused mainly by industrialization, urban development, and inadequate waste management, leading to the release of harmful pollutants, especially heavy metals, into water bodies. These pollutants provide significant risks to ecological and public health owing to their toxicity, persistence, and bioaccumulative properties. Traditional water and wastewater treatment methods often inadequately remove these persistent pollutants due to challenges in selectivity, efficiency, and flexibility. Nanotechnology has grown as an effective and innovative method for eliminating pollutants, providing improved materials with distinctive physicochemical characteristics, including large surface area, increased reactivity, and functional tunability. The study systematically examines the utilization of nanotechnology in water and wastewater treatment, focusing on the adsorption-based elimination of heavy metal ions. The article begins with a summary of conventional treatment techniques and their limitations, then addresses adsorption principles, including physisorption and chemisorption processes. The review classifies and critically evaluates various types of nanoadsorbents, such as carbon-based nanocomposites, zeolites, metal and metal oxide nanoparticles, silica nanomaterials, polymer-based materials, metal–organic frameworks, and layered double hydroxides, emphasizing their efficacy under different operational conditions. Furthermore, essential nanomaterial characterization methods are introduced to assess structure–function relationships. This study provides an essential overview for academics and practitioners seeking to develop efficient, sustainable, and cost-effective nanomaterials for advanced water treatment systems by including current advancements and comparative data.
What the sources say
- Partly supportedcites [23] sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says some existing adsorbents for methylene blue have limitations, including low adsorption capacity, and describes adsorption and photocatalysis as superior to other approaches for its removal. It does not say traditional treatment methods often fail to remove persistent pollutants generally, or attribute such failure to problems with selectivity, efficiency, and flexibility. (LLM, conf=0.82)
- Not checked — no full text of the sourcecites [24] source
- Not checked — no full text of the sourcecites [25] source
- Not checked — no full text of the sourcecites [26] source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § Introduction Water is the fundamental component necessary for every living thing on the planet and a valuable resource for the development of human society.1 Ensuring the consistent and dependable availability of uncontaminated and accessible water is widely recognized as an essential purpose of humanistic efforts and continues to be a significant worldwide obstacle. Even though water covers over 71 percent of the Earth's surface, the amount of clean water accessible for utilization remains extremely limited, and the need for water is rising due to the expansion of industrial activity and growing populations.2Fig. 1 depicts the global distribution of water. The primary concern associated with rising water consumption is providing potable water to the necessary fields. In addition to its domestic applications for consumption and use in cooking, pure water is also a crucial resource for various emerging businesses, including food, pharmaceuticals, electronics, and medical areas. However, the accessible freshwater reservoir faces complexity due to diminishing quantities caused by global warming, population growth, and stricter health regulations. Research by the World Health Organization (WHO) reveals that 2.1 billion people lack access to potable water sources, and over 700 million people do not have access to the essential daily demand for potable water. Moreover, approximately 4 billion individuals globally experience water shortages for at least one month yearly.2–5 Overall, eighty percent of health issues globally can be traced back to a contaminated water supply, directly or indirectly. Additionally, nineteen percent of all human deaths can be attributed to diseases associated with pathogenic microbes present in water.6 Furthermore, an alarming number of two million individuals die of diarrheal diseases annually as a direct consequence of the absence of any enhanced sanitary system, and each day, approximately 5000–6000 children lose their lives as a result of diarrhea, a water-based issue. Therefore, an uninterrupted provision of purified water is crucial for our everyday consumption. According to WHO guidelines, drinking water should have undetectable levels of fecal and total coliforms in any 100 mL water sample. The paper, plastic, and metal sectors also rely on providing uncontaminated water for their manufacturing processes. Therefore, individuals can reduce water consumption by gaining a deeper awareness of how water is used and recycled in the production of goods.4,7–9 Polluted water not only has adverse effects on the lives of people but also has harmful effects on biodiversity and ecosystems.10 It is crucial to implement new regulations for water usage in response to the growing strain on water resources, the unpredictable availability of clean water, and the impact of global climate change. The many demands placed on water systems necessitate the utilization or reutilization of alternate water sources, such as saltwater, stormwater, brine water, and recycled household water, particularly in regions with a history of water scarcity.11,12 In addition to these global statistics, several practical cases further illustrate the severity of water pollution. For instance, the Flint water crisis in the United States highlighted the devastating health consequences of lead-contaminated drinking water on local communities.13 Chronic exposure to heavy metals such as arsenic, lead, and cadmium through contaminated water has been strongly associated with gastrointestinal disorders and increased cancer risks, particularly rectal and colorectal cancers.14 In Bangladesh, high levels of naturally occurring arsenic in groundwater continue to affect millions of people, with epidemiological data linking this exposure to gastrointestinal cancers and other severe health effects.14–17 Similarly, in China, long-term exposure to contaminated water containing nitrates, polycyclic aromatic hydrocarbons, and heavy metals has been associated with elevated incidences of digestive system cancers.14,18 These practical examples underscore the urgent need for effective and sustainable treatment strategies to mitigate the health and environmental impacts of water pollution. As a result of the environmental concerns caused by water contamination, many scientists have focused their attention on developing innovative methods for treating wastewater,21 and governments, non-governmental organizations, and environmentalists have established strict regulations and standards to promote environmental conservation and the principles of reuse, reduce, and recycle.22 Various methods have been created so far to reduce the release of wastewater and lessen the risks associated with contaminants. These methods include coagulation/flocculation, membrane filtration, adsorption, oxidation, chemical precipitation, and biological treatment.23,24 Wastewater treatment often incurs substantial expenses due to the necessity of efficiently eliminating the contaminants in the wastewater to render the water safe and appropriate for reuse. Nevertheless, the planning and development of these wastewater treatment methods primarily focus on investigating effluents and treatment standards, disregarding their potential effects on the entire treatment process and sustainability.25 Current treatments do not eliminate contaminants; instead, they either concentrate them or transform them into other forms.26 The progress in nanotechnology presents several possibilities for developing cost-effective and eco-friendly water supply methods. Nanomaterials are anticipated to possess diverse characteristics that provide cost-efficient and highly efficient methods for treating wastewater and water. These techniques would depend less on complex infrastructure for wastewater treatment and could be used with other water treatment processes such as adsorption, coagulation, membrane technology, and photocatalysis.11,27 Nanotechnology-based approaches for water and wastewater treatment have emerged as promising solutions to overcome key challenges in conventional treatment techniques. These advanced technologies provide innovative and efficient mechanisms for pollutant removal, enabling the cost-effective utilization of alternative water sources to enhance water availability. The increasing quantity of scientific articles in this field demonstrates the growing interest and recognition of nanotechnology's potential in addressing complex water pollution issues (as shown in Fig. 2). Alongside advances in synthesis, comprehensive characterization of nanomaterials is essential to validate their unique physiochemical properties and ensure their suitability for water and wastewater treatment applications. Different techniques provide complementary insights: microscopy-based methods (e.g., SEM, TEM, AFM) reveal particle size, morphology, and crystal structure; spectroscopy methods (e.g., FTIR, UV-Vis, XPS) identify surface functional groups and electronic state; diffraction and scattering methods (e.g., XRD, SAXS) confirm crystallinity and phase composition; while surface and stability analyses (e.g., BET, zeta potential, DLS) quantify porosity, surface area, dispersion behavior, and colloidal stability.28–31Fig. 3 illustrates the main characterization techniques commonly employed in nanomaterial research and the properties they reveal. Including these techniques at the early stage of material evaluation is crucial, as particle size, morphology, surface chemistry, and stability directly govern adsorption performance, regeneration potential, and environmental safety. This article provides a comprehensive review of recent advancements in nanotechnologies applications for water and wastewater treatment. It highlights the potential of nanomaterials to overcome the limitations of conventional treatment methods by offering enhanced efficiency, selectivity, and reusability. A detailed comparison between traditional techniques and nanotechnology-based approaches is presented to emphasize the superiority of nanoscale materials in pollutant removal. The review further examines the synthesis, structural properties, and performance of various nanoparticles and nanocomposites, particular focusing on their mechanisms of decontamination. Special attention is given to nanoadsorbents for the removal of heavy metals, with discussions on adsorption processes and the influence of key operational parameters such as solution pH, temperature, contact time, initial metal ion concentration, and adsorbent dosage. Overall, this study underscores the significance of nanotechnology as a sustainable and efficient alternative for water purification. Moreover, recent evidence demonstrating the continued rise in industrial effluent discharge and associated heavy metal pollution highlights the urgent need to develop advanced and cost-effective treatment strategies.32–34 Numerous research groups have investigated diverse methods for treating heavy metal-contaminated wastewater using a wide range of materials.35–37 This review consolidates the most recent progress in employing nanomaterials for heavy metal removal, emphasizing their superior adsorption capacity, regeneration potential, and environmental compatibility compared to conventional adsorbents. The article elaborates on the fundamental principles of nanotechnology, interaction mechanisms between nanomaterials and heavy metal ions, and the types and performance of different nanomaterials utilized for remediation. Furthermore, it identifies knowledge gaps and future perspectives for optimizing nanomaterial design, improving recyclability, and ensuring environmental safety. To the best of our knowledge, this review provides one of the most comprehensive and up-to-date analyses of nanomaterial-based approaches for heavy metal removal, serving as a valuable reference for both researchers and practitioners in developing sustainable water treatment technologies. · plain
Every source the paper cites for this claim was checked and supports it.
In the paper
“Nanotechnologies provide significant benefits for water decontamination due to their small size and the exceptional physicochemical characteristics of nanoparticles.6”
§ Emerging nanotechnology approaches for sustainable water treatment and heavy metals removal: a comprehensive review > Nanotechnology > Application of nanotechnology in wastewater
What the sources say
- Supportedcites [6] source
The Introduction states that nanotechnologies are advantageous for water remediation because of their dimensional domain and the physicochemical properties of nanomaterials. Section 3 likewise identifies small size and other distinctive nanoparticle properties as sources of their wastewater-treatment advantages. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Many efficient, environmentally friendly, and economical nanomaterials can be used to treat water and wastewater.”
§ Emerging nanotechnology approaches for sustainable water treatment and heavy metals removal: a comprehensive review > Nanotechnology > Application of nanotechnology in wastewater
What the sources say
- Partly supportedcites [52] sourceExperimental — accuracy not yet measured
The Introduction and Conclusions describe various nanomaterials used effectively in wastewater treatment, and §4 calls nano-membrane filtration economical. But the Conclusions caution that nanoparticles may pose environmental risks and that most nanomaterials are not yet cost-competitive; the paper does not establish all three qualities for the many materials claimed. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [103] source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Functional groups such as carboxyl (–COOH), amino (–NH2), hydroxyl (–OH), and thiol (–SH) can form strong coordinate or covalent bonds with heavy metal ions, producing stable inner-sphere complexes that enhance adsorption selectivity and capacity.”
§ Emerging nanotechnology approaches for sustainable water treatment and heavy metals removal: a comprehensive review > Adsorption
What the sources say
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Every source the paper cites for this claim was checked and supports it.
In the paper
“Nanomaterials demonstrate significant efficacy in eliminating pollutants from aqueous environments.101”
§ Emerging nanotechnology approaches for sustainable water treatment and heavy metals removal: a comprehensive review > Nanotechnology > Application of nanotechnology in wastewater
What the sources say
- Supportedcites [101] source
The Introduction says nanomaterials are highly effective adsorbents for a wide range of pollutants and specifically discusses their adsorption of pollutants from water. This supports the citing sentence's broad paraphrase. (LLM, conf=0.92)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
98 more claims · 26 with their cited sources checked
Create a free account to see all 242 claims and every source verdict.
- It may state two separate claims as one. 119
- Probably not a substantial claim. 33
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703
Nanoparticles: Properties, applications and toxicities
Khan, I., Saeed, K., & Khan, I. (2019) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2017.05.011 · Cited by 6,244
Dye and its removal from aqueous solution by adsorption: A review
Yagub, M. T., Sen, T. K., Afroze, S., & Ang, H. M. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.04.002 · Cited by 4,357 · cited 2×
“…58,62 Reversibility: owing to the small interaction forces, physisorption is o en reversible, facilitating the straightforward desorption of the adsorbate from the adsorbent surface (regeneration or reactivation) 74 Irreversible: due to strong bond formed, chemosorption is o en irreversible.”
Low-cost adsorbents for heavy metals uptake from contaminated water: a review
Babel, S. (2003) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(02)00263-7 · Cited by 3,444 · cited 1×
“165,166 In addition to impacting people and animals, it is important to ensure that the concentration of heavy metals in plants remains below the permitted level.”
Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges
Baig, N., Kammakakam, I., & Falath, W. (2021) · Materials Advances · doi:10.1039/d0ma00807a · Cited by 3,262
New trends in removing heavy metals from industrial wastewater
Barakat, M. A. (2011) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2010.07.019 · Cited by 3,094 · cited 1×
“170,171 Signi cant progress has been achieved in many nanomembrane methods, including ultra l-tration, nano ltration, and reverse osmosis.”
Efficiency of various recent wastewater dye removal methods: A review
Katheresan, V., Kansedo, J., & Lau, S. Y. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.06.060 · Cited by 2,752 · cited 2×
“…method is characterized by low activation energy requirements, providing rapid operation 75 Activated technique: chemisorption needs activation energy, resulting in a slower method relative to physisorption 75 Temperature sensitivity: physisorption is generally enhanced at lower temperature levels.”
Applications of nanotechnology in water and wastewater treatment
Qu, X., Alvarez, P. J. J., & Li, Q. (2013) · Water Research · doi:10.1016/j.watres.2012.09.058 · Cited by 2,444 · cited 2×
“11,27 Nanotechnology-based approaches for water and wastewater treatment have emerged as promising solutions to overcome key challenges in conventional treatment techniques.”
Mourdikoudis, S., Pallares, R. M., & Thanh, N. T. K. (2018) · Nanoscale · doi:10.1039/c8nr02278j · Cited by 2,191 · cited 2×
“31,145,147,158,159 Fig.”
Use of iron oxide nanomaterials in wastewater treatment: A review
Xu, P., Zeng, G. M., Huang, D. L., Feng, C. L., Hu, S., Zhao, M. H., Lai, C., Wei, Z., Huang, C., Xie, G. X., et al. (2012) · Science of The Total Environment · doi:10.1016/j.scitotenv.2012.02.023 · Cited by 1,929
Research works printed but not linked: 10
- WHO/UNICEF Joint Water Supply and Sanitation Monitoring Programme , World Health Organization and UNICEF , Progress on Drinking Water and Sanitation , 2012 update, UNICEF , 2012
- Rashid, 2021, Environ. Sci. Pollut. Res., 28, 9050, 10.1007/s11356-021-12395-x/Published · doi:10.1007/s11356-021-12395-x/published
- M. C.Roco , National Nanotechnology Initiative-Past, Present, Future , Handbook on Nanoscience, Engineering and Technology , 2007 , vol. 2 , pp. 3–4
- I. J.El Saliby , H. K.Shon , J.Kandasamy , and S.Vigneswaran , Nanotechnology For Wastewater Treatment: In Brief , Encyclopedia of Life Support System (EOLSS) , 2008 , vol. 15 , p. 15
- Singh, 2022, International Journal of Research and Innovation in Applied Science, 7, 1
- Singh, 2020, Mater. Today: Proc., 29, 327
- Ghotekar, 2020, Adv. J. Chem. Sect. B, 2020, 128, 10.33945/SAMI/AJCB.2020.3.5 · doi:10.33945/sami/ajcb.2020.3.5
- Rahmani, 2011, J. Environ. Health Sci. Eng., 8, 175
- Mirbaloochzehi, 2020, Adv. J. Chem. A, 3, 612, 10.33945/SAMI/AJCA.2020.5.6 · doi:10.33945/sami/ajca.2020.5.6
- Ramadan, 2024, Glob. Nest J., 26, 6216, 10.30955/gnj.006216 · doi:10.30955/gnj.006216
Cited by
Gkika, D. A., & Kyzas, G. Z. (2025) · RSC Sustainability · doi:10.1039/d5su00802f · Cited by 50
Khalil, A. M. E., Tabish, T. A., Joshi, B. D., Egiza, M., Memon, F. A., & Zhang, S. (2026) · Carbon Trends · doi:10.1016/j.cartre.2026.100609 · Cited by 23
Recent advances in nanocomposites and nano-adsorbents for heavy metal and dye removal from water
Rahman, A., Hasnain, S. M. M., Zairov, R., & Kumar, R. (2026) · Cleaner Water · doi:10.1016/j.clwat.2026.100215 · Cited by 23
Lanthanide ion-doped carbon dots (Ln-CDs) as fluorescent nanoprobes: a review
Kayani, K. F., & HamaRawf, R. F. (2026) · RSC Advances · doi:10.1039/d6ra01564f · Cited by 16
Self-citationJesmin, F., Mitu, J. F., Khandaker, T., Ibrahim, A. B. M., Anik, M. A.-A. M., Anojaidi, K. I., Al-Suwaylih, W. A., Hasan, M. K., & Hossain, M. S. (2026) · RSC Advances · doi:10.1039/d5ra07712e · Cited by 14
Maikano, H., Yahya, M. D., Baba, I. A., Abdulkareem, A. S., Tijani, J. O., Olutoye, M. A., & Obayomi, K. S. (2026) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2026.101144 · Cited by 16
Singh, H., Dhanu, A. S., Joshi, A. S., Mijakovic̀, I., & Singh, P. (2026) · Frontiers in Chemistry · doi:10.3389/fchem.2026.1772161 · Cited by 23
“At the same time, they are easier to regenerate and cause less secondary pollution than the conventional adsorbents (Hussein et al., 2025).”
Kayani, K. F. (2026) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2026.116801 · Cited by 8
Self-citationA nanotechnology roadmap for circular wastewater management
Ogwu, M. C., Ojija, F. S., Ojo, A. O., & Ulimboka, R. (2026) · Frontiers in Environmental Engineering · doi:10.3389/fenve.2026.1785394 · Cited by 12
Rahman, M. A. (2026) · Heat Transfer · doi:10.1002/htj.70243 · Cited by 6
“Halloysite nanotubes functionalized with APTES hit 714 mg/g MB [33, 41] FIGURE 2 | Various categories of nanomaterials based on architectural configuration [42].”
Fattah‐alhosseini, A., Sangarimotlagh, Z., Chaharmahali, R., et al. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.121144 · Cited by 4
Mathew, D., M., S. N., Thomas, J. B., & Thomas, B. (2026) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-025-04156-x · Cited by 3
“Adsorption, by contrast, offers simplic - ity, adaptability, and high efficiency at low concentrations, making it suitable for dental effluent treatment [ 18].”
Advanced Remediation: A Sustainable Technology for Removal of Water/Wastewater Contaminants
Shobana, S., Elangovan, A. K., Dung, T. N. B., Jaffur, B. N., Kumar, T., Shankar, S. G., Karuppusamy, I., & Arvindnarayan, S. (2026) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-026-00677-4 · Cited by 3
“Looking ahead, interdisciplinary collaboration among the engineers, scientists, and the public will be critical to lower the wastewater contamination [ 133 ].”
Baba, I. A., Mustapha, L. S., Obayomi, O. V., Obayomi, K. S., & Zhang, J. (2026) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2026.119919 · Cited by 7
Chitalkar, K. K., Hase, D., Kadam, K., Bhavsar, K. S., Murade, V. D., & Aher, H. R. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-13032-z · Cited by 5
Canpolat, M., & Altunkaynak, Y. (2026) · Journal of the Iranian Chemical Society · doi:10.1007/s13738-026-03390-5 · Cited by 2
Smart nanosystems for disease-resistant potatoes: a new Frontier in nanobiotechnology
Chen, B., Rafiq, M. U., Usman, M., et al. (2026) · RSC Advances · doi:10.1039/d5ra07976d · Cited by 2
Abera, B., Kahsay, G., Negussie, T., & Mebratie, G. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2026.103450 · Cited by 6
Recently emerging advancements in bio-adsorbents for aqueous cadmium removal
Nwakamma, N.-E., Chukwuneke, J. L., Chukwuemeka, O. H., & Chukwudi, U. (2026) · Desalination and Water Treatment · doi:10.1016/j.dwt.2026.101811 · Cited by 3
Advances in Biochar Production and Performance for Sustainable Environment and Energy Applications
Abbas, A., Afzal, S., Waseem, M., Ahmad, M., & Xu, D. (2026) · Sustainability · doi:10.3390/su18125865 · Cited by 4
Dubey, S., Ramaraj, S. G., Tabata, H., Pal, K., & Kaur, K. (2026) · Nanoscale · doi:10.1039/d6nr01781a · Cited by 3
Wang, C., Li, S., Li, S., et al. (2026) · Journal of Environmental Management · doi:10.1016/j.jenvman.2026.129006 · Cited by 1
Nelson, V. K., Meenuga, S., Hani, U., FATIMA, F., Fathima, J. H. S., Jothinathan, M. K. D., & Bhargavi, B. (2026) · Environmental Geochemistry and Health · doi:10.1007/s10653-026-03100-3 · Cited by 2
“In this regard, engineered nanomaterials (ENMs) are found as potential substitutes attributable to their high specific surface area and porosity as well as catalytic activity (Hussein et al., 2025; Onotu et al., 2025).”
Unveiling the role of artificial neural network in heavy metal detection and remediation
Thirunavukkarasu, I., Kunal, A., & Mulky, L. (2026) · Separation Science and Technology · doi:10.1080/01496395.2026.2632747 · Cited by 1
Nano-enabled solutions: Advancing pesticide detection and remediation in wastewater
Kazim, H., Sabri, M., Al–Othman, A., et al. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.110579 · Cited by 1
Chandler, A. M., Chen, J., Manosalvas-Mora, J. D., et al. (2026) · Journal of Nanobiotechnology · doi:10.1186/s12951-026-04175-x · Cited by 1
“Regulatory agencies, such as the environmental protection agency and food safety authorities, require comprehensive risk assessments prior to approval, addressing nanoparticle fate, toxicity, bioaccumulation, and potential human exposure [163–166].”
Nanotechnology for Drought Mitigation and Water Conservation: Opportunities and Limitations
El-Ramady, H. R., Sári, D., Elsakhawy, T. A., Abdalla, N. A., Abd-Alla, H. I., & Prokisch, J. (2026) · Nanomaterials · doi:10.3390/nano16090523 · Cited by 2
“On the other hand, nanotechnology can be applied for water treat-ment, reuse, and desalination [121,122].”
Ossai, I. C., Hamid, F. S., Redzwan, G., Aboudi-Mana, S. C., Hassan, A., Emenike, C. U., Okere, K. J., Ntiamoah-Asare, D., & Nnaji, N. J. N. (2026) · Bioresource Technology Reports · doi:10.1016/j.biteb.2026.102828 · Cited by 1
Next-Generation Emerging Nanomaterials: Transforming the Nuclear Fuel Cycle
Patra, K., Pal, H., Das, N., Mittal, V. K., Sengupta, A., Saha, R., & Selvakumar, J. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c00778 · Cited by 5
Said, S., El-Maghrabi, H. H., Riad, M. H., & Mikhail, S. (2026) · RSC Advances · doi:10.1039/d6ra03786k · Cited by 1
Sindhav, B., Mali, M. G., Chaudhari, S. A., et al. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.05.334 · Cited by 1
Elsakhawy, T. A., Sári, D., Sheta, M. H., et al. (2026) · Water · doi:10.3390/w18131551 · Cited by 1
“…nanozymes—nanomaterials mimicking enzymatic activity—have been proposed to overcome the strict pH and environmental constraints of traditional catalysts, they too face significant material stability and scale-up challenges under the harsh physicochemical fluctuations of industrial wastewater [43].”
Recent advances in the adsorptive removal of antiviral pharmaceuticals from water: A critical review
Kalyoncu, B., Dedecan, T., Göcen, Ü., Baylan, N., & İnci, İ. (2026) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2026.110447 · Cited by 3
De, A. K., Ghosh, S., & Das, D. (2026) · RSC Advances · doi:10.1039/d5ra09309k · Cited by 1
Suriya, S., Jinesh Babu, K. S., Praburajan, B., et al. (2026) · Separation Science and Technology · doi:10.1080/01496395.2026.2618612
“[14,26,39] These characterization tests were performed on both raw Limonia acidis-sima (LA) and its biochar form (BLA).”
Ücker, C. L., Dias, V. P., Brum, D. D. O., et al. (2026) · ChemistrySelect · doi:10.1002/slct.202506786
Nabil, G. M., Althomali, R. H., & Elsyed, M. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.151440
Khalid, R., Raza, S., Ashraf, F., Abid, A., Masood, H. T., Malik, M. O., Bashir, R., & Al-Khazaal, A. Z. (2026) · Water Practice & Technology · doi:10.2166/wpt.2026.231
Izuagie, T., Oyem, I. M., Umar, B. N., Isah, A., Abdulsalami, I. O., & Oyem, H. H. (2026) · Sustainability Science and Technology · doi:10.1088/2977-3504/ae565e · Cited by 3
Fathi, J., Hudcová, B., Mašláni, A., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6519407
Adeyeye, S. A. O., & Adeyeye, B. R. (2026) · Food Control · doi:10.1016/j.foodcont.2026.112239 · Cited by 1
Nanochitosan-based adsorbents for sustainable treatment of palm oil mill effluent
Raji, R. O., Izuafa, A., Auta, H. S., et al. (2026) · RSC Advances · doi:10.1039/d6ra02194h
El‐Liethy, M. A., Hemdan, B. A., & El‐Taweel, G. E. (2026) · Discover Nano · doi:10.1186/s11671-026-04632-4
“Furthermore, addressing potential nanotoxicity, environmental impact, and long-term material stability is crucial to ensure safe, sustainable, and regula-tory-compliant application of nano-enabled water disinfection systems [170].”
Emerging nanotechnological approaches for sustainable wastewater treatment
Roy, A. S., Nandy, S., Kumari, M., & Dufossé, L. (2026) · Sustainable Chemistry for Climate Action · doi:10.1016/j.scca.2026.100215 · Cited by 2
2026 roadmap on sustainable water management
Pan, S.-Y., Rani, A., Baltrušaitis, J., 남원호, Chen, Y., Kim, H., Lei, Z., Bui, X., Pierce, G., Kim, C.-G., et al. (2026) · Sustainability Science and Technology · doi:10.1088/2977-3504/ae71d2 · Cited by 1
Vanadium Passivated TiO₂ Nanoplate for Selective Molybdenum Recovery from Spent HDS CatalystsPreprint
Kim, S. W., Seok, S. W., Yang, W. J., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6826851
Zeolite amendments in silty loam soils: Impacts on infiltration, runoff and soil erosion
Ahmadi, S. H., Mosaffa, H. R., & Sepaskhah, A. R. (2026) · Earth Surface Processes and Landforms · doi:10.1002/esp.70328
“However, concerns remain regarding environmental fate, mobility and economic costs of nanomaterials, emphasising the need for careful evaluation in erosion control contexts (Alkhaza ‧ leh et al., 2025; Bhat, Gedik, & Gaga, 2023; Hussein et al., 2025).”
Hydration Effects in the Adsorption of Cu 2+ and Pb 2+ on Graphene Oxide-Based Materials
Côrtes, P. R. B., Leite, B. L. G., Jauris, C. F. D. M., Köhler, M. H., & Bordin, J. R. (2026) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6c02629
Santhosh, K. N., Aditya, D. S., Mahadevaprasad, K. N., Kumar, K. A., Kumar, A., Kalpana, D., & Nataraj, S. K. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.178558
Han, G. B., Cui, R., Liu, J., et al. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.123909
Prospects and potential hazards of nanomaterials in environmental remediation
Afitijagun, I. P., Edo, G. I., Orogu, J. O., Emumejaye, K., Makia, R. S., Oghroro, E. E. A., Owheruo, J. O., Yousif, E., Jikah, A. N., Essaghah, A. E. A., et al. (2026) · Ecological Frontiers · doi:10.3724/j.ecofro-20260044
Baba, I. A., Mustapha, S., Awe, O. B., Usman, R. A., Abdulkareem, A. S., Tijani, J. O., Kovo, A. S., & Obayomi, K. S. (2026) · Bioresource Technology Reports · doi:10.1016/j.biteb.2026.102941
Banin, G. U., Shahzad, S., & Shah, A. (2026) · RSC Advances · doi:10.1039/d6ra00667a · Cited by 1
“36 Recent review articles have examined adsorbent materials for contaminant removal, o en concentrating on particular categories such as polymer-based systems, nanomaterials, or wastewater treatment applications.”
Fathi, J., Hudcová, B., Mašláni, A., Hlína, M., Mušálek, R., Lukáč, F., Pilnaj, D., Lojka, M., Jankovský, O., Pohořelý, M., et al. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.124232
Joshi, H. K., Punetha, G., & Pandey, D. (2026) · Water Environment Research · doi:10.1002/wer.70504 · Cited by 2
Zhao, M., Cao, Y., & Wang, Y. (2026) · ChemistrySelect · doi:10.1002/slct.73959
Kaviyarasu, K. (2026) · Bioscience Nanotechnology · doi:10.1186/s44331-026-00025-7
“Nanoparticles based on metals, particularly silver and copper, need to be evaluated carefully due to their ion release and antimicrobial properties, which may inadvertently disrupt beneficial microbial populations [52].”
Vanadium passivated TiO₂ nanoplate for selective molybdenum recovery from spent HDS catalysts
Kim, S. W., Seok, S. W., Yang, W. J., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.180174
Mylarappa, M., Gajendra, B. O., Keerthana, C. R., et al. (2026) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2026.101176
Aouaini, F., Yahia, M. B., Aljaiussy, B. K., et al. (2026) · RSC Advances · doi:10.1039/d6ra05441b
Nanotechnology in Water Remediation: Current Trends and Future Prospects
El-Rawy, M., & Wahba, M. (2026) · Springer eBooks · doi:10.1007/978-3-032-26119-9_8
Chiti, R., Ennouhi, N., Majd, A. E., et al. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.124606
Awe, O. B., Baba, I. A., Mustapha, S., Mustapha, L. S., & Obayomi, K. S. (2026) · Materials Research Bulletin · doi:10.1016/j.materresbull.2026.114401
Emerging materials for per- and polyfluoroalkyl substances (PFAS) removal from water
Bedair, A., Algethami, F. K., Hamed, M., & Mansour, F. R. (2026) · RSC Advances · doi:10.1039/d6ra02536f · Cited by 1
Kafas, İ., Çaylak, O., Belyurt, E., et al. (2026) · Chemical Papers · doi:10.1007/s11696-026-05404-1
Beryllium hexaaluminate-MXene-employed SPR sensor for detecting heavy metal ions in drinking water
Alsharari, M., Aliqab, K., Armghan, A., & Kumar, U. A. (2026) · Modern Physics Letters B · doi:10.1142/s0217984926502106
An Overview of Environmental Technologies for Treating Aquatic, Solid, and Air Ecosystems
Monteiro, M. K. S., Acosta‐Santoyo, G., Gondim, A. D., Espinoza-Montero, P. J., dos Santos, E. V., & Martínez-Huitle, C. A. (2026) · Processes · doi:10.3390/pr14172704
Singh, L., Pathak, J., Arora, J., Shehu, Z., Michael, E., & Jain, H. (2026) · Environmental Monitoring and Assessment · doi:10.1007/s10661-026-15852-7
“This inequality can be observed with photocatalytic systems, magnetic nano-adsorbents, and composite membranes that exhibit high levels of removal efficiency without post-use management guidance (Hussein et al., 2025; Ismail et al., 2019; Masood et al., 2022).”
Chakrabarty, R., Bari, Q. H., & Sarkar, A. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7380667
Sharma, R., Sharma, P., Sharma, A. K., et al. (2026) · International Journal of Nanoscience · doi:10.1142/s0219581x26400399
Shoushtari, Z., Eizi, R., Saljoughi, E., et al. (2026) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2026.110753
Erdogdu, F. N., Işık, B., & Uğraşkan, V. (2026) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.70621
Ndiritu, J., Abol, J. O., & Mwangi, J. W. (2026) · Nanotechnology for Environmental Engineering · doi:10.1007/s41204-026-00602-4
Vashistha, S., Bhatt, E., & Gauba, P. (2026) · BIO Web of Conferences · doi:10.1051/bioconf/202625203006
Nguyen, T. H., Van, H. T., Hoang, T. K., Ngo, V. G., & Nguyen, T. B. L. (2026) · RSC Advances · doi:10.1039/d6ra05966j
Adamu, H., Zango, Z. U., Haruna, A., Bello, U., Garba, A., Wilson, L. D., Saleh, T. A., Abba, S. I., Ashraf, M. W., & Zheng, Y. (2026) · Advanced Functional Materials · doi:10.1002/adfm.78059 · Cited by 1
Rana, A., Kumar, M., Singh, T. G., Singh, G., Baigenzhenov, O., Keshta, B. E., Yaseen, Z. M., & Hosseini–Bandegharaei, A. (2026) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2026.104056 · Cited by 2
Saadat, A., Banaei, A., Ghanifathi, M., & Pargolghasemi, P. (2026) · RSC Advances · doi:10.1039/d6ra08198c
Kocaman, A., Esmeray, E., Çelebi, H., et al. (2026) · RSC Advances · doi:10.1039/d6ra07924e
“13 Despite these developments, the design of chemically stable and reusable inorganic adsorbents with well-de ned surface interactions remains important for practical dye treatment.”
Polymer and graphene metal-based nanocomposites for H2 energy applications
Yelwa, J. M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-36461-7.00015-3
Khumalo, N. P., Mubiayi, M. P., & Mamba, B. B. (2026) · Water Environment Research · doi:10.1002/wer.70558
“The application of conventional adsorbents (activated carbon and nanoparticles) at a large scale is limited by high production costs and challenges with regeneration in resource-constrained regions (Chen et al. 2026; Hussein et al. 2025; Satyam and Patra 2024).”
Insights into Cr(VI) adsorption by microwave-derived biochar from Cucumis melo peel
Ly-Tran, Q.-B., & Nguyen, D. T. P. (2026) · Journal of the Indian Chemical Society · doi:10.1016/j.jics.2026.103151
Metadata
- Authors
- Hussein, E. B., Rasheed, F. A., Mohammed, A. S., & Kayani, K. F.
- Affiliations
- University of Sulaimani (IQ)
- American University of Iraq Sulaimani (IQ)
- Corresponding author
- Hussein, Erfan Burhan
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2025
- Volume
- 15
- Issue
- 48
- Pages
- 41061-41107
- ISSN
- 2046-2069 (ISSN-L)
- PMC
- PMC12559996
- OpenAlex
- W4415609218
- Cited by
- 86
- References
- 236
- Citations by year
- 2026: 85 · 2025: 1
- FWCI
- 5.46
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- RSC Advances (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
- Physical Sciences › Environmental Science › Water Science and Technology › Heavy Metal Pollution Remediation
- Keywords
- nanotechnology, heavy metal removal, water treatment, wastewater treatment, adsorption, nanoadsorbents, physisorption, chemisorption, metal oxide nanoparticles, metal-organic frameworks, layered double hydroxides, zeolites, carbon nanocomposites, silica nanomaterials, nanomaterial characterization, water pollution
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.