Online fault-detecting scheme of an inverter-fed permanent magnet synchronous motor under stator winding shorted turn and inverter switch open
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
To detect faults in an inverter-fed permanent magnet synchronous motor drive under the circumstance having faults in a stator winding and inverter switch, an online basis fault-detecting scheme during motor operation is presented. The proposed scheme is achieved by monitoring the second-order harmonic component in q-axis current and the fault is detected by comparing these components with those in normal conditions. The non-fault harmonic data in an arbitrary operating condition are determined using the linear interpolation method with several sample harmonic data pre-measured in the stage of the initial drive setup. Once the fault is detected, the operating mode is changed to identify a fault source using the phase current waveform. To verify the effectiveness of the proposed fault detecting scheme, a test motor to allow inter-turn short in the stator winding has been built. The entire control system including harmonic analysis and fault detecting algorithm is implemented using digital signal processor TMS320F28335. Without requiring an additional hardware, the fault can be effectively detected by the proposed scheme during operation so long as the steady-state condition is satisfied.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Fault-tolerant control in variable speed drives: a survey
Campos-Delgado, D. U., Espinoza-Trejo, D. R., & Palacios, E. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070203 · Cited by 228
Cited by
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377
“VSI open-circuit faults can also be effectively detected and localized by the analysis of the second-order harmonic component in the q-axis or by using the discrete wavelet transform [28]-[29].”
MethodJlassi, I., Estima, J. O., Khojet El Khil, S., Mrabet Bellaaj, N., & Marques Cardoso, A. J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2342506 · Cited by 212
“The analysis of the second-order harmonic component in the q-axis or the discrete wavelet transform can also be effectively used for voltage source inverter open-circuit faults diagnosis [29], [30].”
MethodGurusamy, V., Bostanci, E., Li, C., Qi, Y., & Akin, B. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3013128 · Cited by 93
“Another current-based study utilized the second harmonic component of q-axis current to detect the fault [14].”
MethodSensor Fault-Resilient Control of Interior Permanent-Magnet Synchronous Motor Drives
Beng, G. F. H., Zhang, X., & Vilathgamuwa, D. M. (2015) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2014.2311126 · Cited by 65
Metadata
- Authors
- Kim, K.-H., Gu, B.-G., & Jung, I.-S.
- Venue
- IET Electric Power Applications
- Published
- 2011-07-05
- Volume
- 5
- Issue
- 6
- Pages
- 529-539
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W2167753191
- Cited by
- 45
- References
- 2
- FWCI
- 5.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.