The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Fault-tolerant control in variable speed drives: a survey
Abstract
A survey on fault-tolerant control is presented for variable speed drives (VSD), mainly addressing DC and induction motors. Thus, fault diagnosis, accommodation and hardware reconfiguration are reviewed with application to VSD. First, the most common fault scenarios in these electrical machines are described. These conditions are analysed, and their implications and mathematical modelling are discussed. Next, the fault diagnosis strategies based on signal processing, model-based techniques and artificial intelligence are reviewed. Moreover, the diverse hardware reconfiguration schemes of power actuators with semiconductor failures are detailed. A key piece in any VSD is the control algorithm, which can be severely affected in a fault condition. Finally, the fault accommodation schemes suggested so far in the literature are illustrated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The main problem for model-based techniques is their robustness to system parameter changes and the threshold choice for the particular failure types in a given system [275].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [275]
Citations
Cites
Robust Model-Based Fault Diagnosis for Dynamic Systems
Chen, J., & Patton, R. J. (1999) · The Kluwer international series on Asian studies in computer and information science · doi:10.1007/978-1-4615-5149-2 · Cited by 4,280
Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy
Frank, P. M. (1990) · Automatica · doi:10.1016/0005-1098(90)90018-d · Cited by 3,545
Diagnosis and Fault-Tolerant Control
Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. (2003) · Springer eBooks · doi:10.1007/978-3-662-05344-7 · Cited by 2,789
Analysis of Electric Machinery and Drive Systems
Krause, P. C., Wasynczuk, O., Sudhoff, S. D., Pekarek, S. D., & Institute of Electrical and Electronics Engineers (2013) · Wiley eBooks · doi:10.1002/9781118524336 · Cited by 2,683
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,392
Analysis of Electric Machinery and Drive Systems
Krause, P. C., Wasynczuk, O., & Sudhoff, S. D. (2002) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470544167 · Cited by 2,313
Multiphase induction motor drives – a technology status review
LEVI, E., Bojoi, R. I., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,620
A review of induction motors signature analysis as a medium for faults detection
Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,610
Electric Motor Drives: Modeling, Analysis, and Control
Krishnan, R. (2001) · Cited by 1,340
Trends in the application of model-based fault detection and diagnosis of technical processes
Isermann, R., & Ballé, P. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00053-1 · Cited by 1,186
Flagged first, then by citations
Research works printed but not linked: 14
- Glukhov, 2003, Modern Techniques and Technologies. Proc. 9th Int. Scientific and Practical Conference, 128
- Gopalarathnam, 2000, Proc. IEEE-IAS Annual Metting
- Levi, 2007, 1, 489
- Claudio, 2004, lnt. Conf. Electrical and Electronics Engineering
- Tallam, 2003, SDEMPED
- Thomson, 2003, Proc. 32nd Turbomachinery Symp., 145
- Haji, 2001, Annual Conf. IEEE Industrial Electronics Society
- De Miguel, 2005, 18, 423
- Espinoza-Trejo, 2006, 2006 Int. Conf. Dynamics, Instrumention, and Control
- Chan, 2004, Control 2004
- Kwak, 2002, Industrial Electronics Society, 2002, IECON 02, 28th Annual Conf. IEEE, 886
- Wang, 2002, Applied Power Electronics Conf., 2005, APEC 05, 20th Annual Conf. IEEE, 886
- Tahami, 2006, Int. Symp. Power Electonics, Electrical Drives, Automation and Motion, 66
- Monmasson, Proc. IEEE Int. Symp. Industrial Electronics ISIE 2002, 3, 828
Cited by
Sorted by citations
Items 201–228 of 228
AN INTEGRATED TECHNIQUE TO MAXIMIZE THE EFFICIENCY AND POWER FACTOR OF INDUCTION MOTOR
Anbalagan, N., & Pandian, S. C. (2013)
Układ napędowy o zwiększonym stopniu bezpieczeństwa z adaptacyjnym regulatorem neuronowo-rozmytym
Dybkowski, M. (2014) · Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Dybkowski, M. (2014) · Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Układ napędowy o zwiększonym stopniu bezpieczeństwa z kompensatorem neuronowo-rozmytym
Dybkowski, M., & Klimkowski, K. (2015) · Poznan University of Technology Academic Journals Electrical Engineering
Modelowanie zwarć międzyzwojowych w uzwojeniu stojana silnika indukcyjnego klatkowego
Radecki, A. (2016) · PRZEGLĄD ELEKTROTECHNICZNY · doi:10.15199/48.2016.06.08
Fault Detection and Isolation of Nonlinear Systems with Generalized Hamiltonian Representation
Alfaro, L. H. R., García, E. A., Posadas–Castillo, C., & Diaz-Romero, D. A. (2017) · InTech eBooks · doi:10.5772/68084
Predictive Torque Control Scheme for Three-Phase Four-Switch Inverter -Fed Induction Motor Drive
Aparna, M. M., & Tejaswani, K. N. (2017)
Fadil, H., Elhafyani, M. L., & Zouggar, S. (2018) · International Journal of Power Electronics and Drive Systems (IJPEDS) · doi:10.11591/ijpeds.v9.i2.pp559-570
Układ sterowania wektorowego silnikiem indukcyjnym odporny na uszkodzenia przetwornika prądu stojana
Klimkowski, K. (2018) · PRZEGLĄD ELEKTROTECHNICZNY · doi:10.15199/48.2018.05.15
Design of predictive controllers for fault‐tolerant surface‐mounted PMSM drive systems
Liu, T., & Tu, Y. (2019) · The Journal of Engineering · doi:10.1049/joe.2019.0005
An Inverter with Large Fault-tolerant Space for Battery Storage in Islanded Microgrid
Li, Y., Peng, X., & Yang, Z. R. (2019) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2019.8926618
Yelamarthi, B. S. S. G., & Sandepudi, S. R. (2019) · 2019 International Conference on Power Electronics, Control and Automation (ICPECA) · doi:10.1109/icpeca47973.2019.8975479
Saleh, K., & Sumner, M. (2020) · International Journal of Electronics · doi:10.1080/00207217.2020.1793415
Modeling and control design of an electric vehicle powertrain
Maraine, D. L. C. (2020) · KTH Publication Database DiVA (KTH Royal Institute of Technology)
Tousizadeh, M., Seng, H., & Rahim, N. A. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1127/1/012029
An adaptive, observer-based switching method for B4 inverters feeding three-phase induction motors
Holagh, H. V., Najafabadi, T. A., & Safamehr, H. (2021) · International Journal of Emerging Electric Power Systems · doi:10.1515/ijeeps-2021-0061
Mahanta, U., Panda, A. K., & Panigrahi, B. P. (2022) · Journal of The Institution of Engineers (India) Series B · doi:10.1007/s40031-022-00742-6
Dhayanandh, S., Immanuel, A., Suryanarayanareddy, V., & Ramakrishnan, K. C. (2022) · International Conference on Computing Methodologies and Communication (ICCMC) · doi:10.1109/iccmc53470.2022.9753952
IBEMOB·22. Proceedings of 1º Iberoamerican Workshop on Electromobility
Triviño, A., & Casaucao, I. (2022) · UMA Editorial eBooks · doi:10.24310/mumaedmumaed.74
Control motor speed through variable frequency drive by using Arduino
Khan, S. U., Din, S. U., Din, S. U., Khan, S. N., Khan, S. N., Hussein, Z. H., & Qadir, T. O. (2023) · AIP conference proceedings · doi:10.1063/5.0124533
Exploring key safety terminology through simulation: Definitions and practical insights
Badrnoebashar, H., Klose, A., Lorenz, J., & Urbas, L. (2024) · Process Safety Progress · doi:10.1002/prs.12660
Teler, K., Skowron, M., & Orłowska-Kowalska, T. (2025) · International Conference on Electrical Drives and Power Electronics (EDPE) · doi:10.1109/edpe66853.2025.11224255
Torque Ripple Reduction Control of a 12-Phase PMSM under Unbalanced Short-Circuit-Induced Back-EMF
Kim, T., Lee, K., Choi, J., & Suh, Y. (2026) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-nagasaki2026-ec64663.2026.11597232
Falownikowy układ sterowania napędem indukcyjnym w stanach awaryjnych: możliwości i ograniczenia
Radecki, A. (2013) · Napędy i Sterowanie
Metadata
- Authors
- Campos-Delgado, D. U., Espinoza-Trejo, D. R., & Palacios, E.
- Affiliations
- Autonomous University of San Luis Potosí (MX)
- Venue
- IET Electric Power Applications
- Published
- 2008-03
- Volume
- 2
- Issue
- 2
- Pages
- 121-134
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W2154152725
- Cited by
- 228
- References
- 81
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 5 · 2023: 7 · 2022: 10 · 2021: 15 · 2020: 18 · 2019: 23 · 2018: 14 · 2017: 15 · 2016: 24 · 2015: 10 · 2014: 12 · 2013: 18 · 2012: 19
- FWCI
- 10.18
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IET Electric Power Applications (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Keywords
- fault-tolerant control, variable frequency drive, DC motor, induction motor, fault diagnosis, fault accommodation, hardware reconfiguration, model-based fault diagnosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
