Cited by 228Sensorless Control of Electric MotorsFault Detection and Control SystemsMachine Fault Diagnosis Techniques

The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.

Fault-tolerant control in variable speed drives: a survey

Campos-Delgado, D.U., Espinoza-Trejo, D.R., Palacios, E.·2008·IET Electric Power Applications

DOI 10.1049/iet-epa:20070203

Open this paper in CoChat — free account

Abstract

A survey on fault-tolerant control is presented for variable speed drives (VSD), mainly addressing DC and induction motors. Thus, fault diagnosis, accommodation and hardware reconfiguration are reviewed with application to VSD. First, the most common fault scenarios in these electrical machines are described. These conditions are analysed, and their implications and mathematical modelling are discussed. Next, the fault diagnosis strategies based on signal processing, model-based techniques and artificial intelligence are reviewed. Moreover, the diverse hardware reconfiguration schemes of power actuators with semiconductor failures are detailed. A key piece in any VSD is the control algorithm, which can be severely affected in a fault condition. Finally, the fault accommodation schemes suggested so far in the literature are illustrated.

Integrity signals

Registry

Crossref · 10.1049/iet-epa:20070203

Cites

81 of 81 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Robust Model-Based Fault Diagnosis for Dynamic Systems
Chen, J., & Patton, R. J. (1999) · The Kluwer international series on Asian studies in computer and information science · doi:10.1007/978-1-4615-5149-2 · Cited by 4,280
Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy
Frank, P. M. (1990) · Automatica · doi:10.1016/0005-1098(90)90018-d · Cited by 3,545
Diagnosis and Fault-Tolerant Control
Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. (2003) · Springer eBooks · doi:10.1007/978-3-662-05344-7 · Cited by 2,789
Analysis of Electric Machinery and Drive Systems
Krause, P. C., Wasynczuk, O., Sudhoff, S. D., Pekarek, S. D., & Institute of Electrical and Electronics Engineers (2013) · Wiley eBooks · doi:10.1002/9781118524336 · Cited by 2,683
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,392
Analysis of Electric Machinery and Drive Systems
Krause, P. C., Wasynczuk, O., & Sudhoff, S. D. (2002) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470544167 · Cited by 2,313
Multiphase induction motor drives – a technology status review
LEVI, E., Bojoi, R. I., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,620
A review of induction motors signature analysis as a medium for faults detection
Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,610
Electric Motor Drives: Modeling, Analysis, and Control
Krishnan, R. (2001) · Cited by 1,340
Trends in the application of model-based fault detection and diagnosis of technical processes
Isermann, R., & Ballé, P. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00053-1 · Cited by 1,186

Flagged first, then by citations

Show all 81 references

Research works printed but not linked: 14

Glukhov, 2003, Modern Techniques and Technologies. Proc. 9th Int. Scientific and Practical Conference, 128
Gopalarathnam, 2000, Proc. IEEE-IAS Annual Metting
Levi, 2007, 1, 489
Claudio, 2004, lnt. Conf. Electrical and Electronics Engineering
Tallam, 2003, SDEMPED
Thomson, 2003, Proc. 32nd Turbomachinery Symp., 145
Haji, 2001, Annual Conf. IEEE Industrial Electronics Society
De Miguel, 2005, 18, 423
Espinoza-Trejo, 2006, 2006 Int. Conf. Dynamics, Instrumention, and Control
Chan, 2004, Control 2004
Kwak, 2002, Industrial Electronics Society, 2002, IECON 02, 28th Annual Conf. IEEE, 886
Wang, 2002, Applied Power Electronics Conf., 2005, APEC 05, 20th Annual Conf. IEEE, 886
Tahami, 2006, Int. Symp. Power Electonics, Electrical Drives, Automation and Motion, 66
Monmasson, Proc. IEEE Int. Symp. Industrial Electronics ISIE 2002, 3, 828

Sorted by citations

A Survey of Fault Diagnosis and Fault-Tolerant Techniques—Part I: Fault Diagnosis With Model-Based and Signal-Based Approaches
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Survey on Fault-Tolerant Techniques for Power Electronic Converters
Zhang, W., Xu, D., Enjeti, P. N., Li, H., Hawke, J. T., & Krishnamoorthy, H. S. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2304561 · Cited by 590
A Robust Observer-Based Sensor Fault-Tolerant Control for PMSM in Electric Vehicles
Kommuri, S. K., Defoort, M., Karimi, H. R., & Veluvolu, K. C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2590993 · Cited by 408
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“The main problem for model-based techniques is their robustness to system parameter changes and the threshold choice for the particular failure types in a given system [275].”
Background
A Robust Observer-Based Method for IGBTs and Current Sensors Fault Diagnosis in Voltage-Source Inverters of PMSM Drives
Jlassi, I., Estima, J. O., El Khil, S. K., Bellaaj, N. M., & Cardoso, A. J. M. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2616398 · Cited by 284
An Observer-Based Diagnosis Scheme for Single and Simultaneous Open-Switch Faults in Induction Motor Drives
Campos-Delgado, D. U., & Espinoza-Trejo, D. R. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2047829 · Cited by 224
Self-citation
A Survey on Active Fault-Tolerant Control Systems
Abbaspour, A., Mokhtari, S., Sargolzaei, A., & Yen, K. K. (2020) · Electronics · doi:10.3390/electronics9091513 · Cited by 221
A Generalized Fault-Tolerant Control Strategy for Five-Phase PM Motor Drives Considering Star, Pentagon, and Pentacle Connections of Stator Windings
Mohammadpour, A., Sadeghi, S., & Parsa, L. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2247011 · Cited by 210
Speed and Current Sensor Fault Detection and Isolation Technique for Induction Motor Drive Using Axes Transformation
Chakraborty, C., & Verma, V. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345337 · Cited by 209
Design of a Fault-Tolerant Controller Based on Observers for a PMSM Drive
Akrad, A., Hilairet, M., & Diallo, D. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2050756 · Cited by 155
Predictive Torque Control Scheme for Three-Phase Four-Switch Inverter-Fed Induction Motor Drives With DC-Link Voltages Offset Suppression
Zhou, D., Zhao, J., & Liu, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2338395 · Cited by 140
Current Sensor Fault-Tolerant Control for Direct Torque Control of Induction Motor Drive Using Flux-Linkage Observer
Manohar, M., & Das, S. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2714675 · Cited by 136
FPGA-Based Reconfigurable Control for Fault-Tolerant Back-to-Back Converter Without Redundancy
Shahbazi, M., Poure, P., Saadate, S., & Zolghadri, M. R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2200214 · Cited by 125
A Comprehensive Investigation of Four-Switch Three-Phase Voltage Source Inverter Based on Double Fourier Integral Analysis
Wang, R., Zhao, J., & Liu, Y. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2119381 · Cited by 120
Detection and Discrimination of Open Phase Fault in Permanent Magnet Synchronous Motor Drive System
Hang, J., Zhang, J., & Cheng, M. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2479399 · Cited by 115
Performance Comparison of Fault-Tolerant Three-Phase Induction Motor Drives Considering Current and Voltage Limits
Tousizadeh, M., Seng, H., Selvaraj, J. A.-L., Rahim, N. A., & Ooi, B. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2850006 · Cited by 114
Virtual-Sensor-Based Maximum-Likelihood Voting Approach for Fault-Tolerant Control of Electric Vehicle Powertrains
Tabbache, B., Benbouzid, M., Kheloui, A., & Bourgeot, J. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2230200 · Cited by 102
Fault tolerant steer-by-wire systems: An overview
Huang, C., Naghdy, F., Du, H., & Huang, H. (2019) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2019.04.001 · Cited by 99
Diagnosis of open‐switch faults in variable speed drives by stator current analysis and pattern recognition
Campos-Delgado, D. U., Pecina-Sánchez, J. Á., Espinoza-Trejo, D. R., & Arce-Santana, E. (2013) · IET Electric Power Applications · doi:10.1049/iet-epa.2013.0015 · Cited by 95
Self-citation
Simple Fault Diagnosis Based on Operating Characteristic of Brushless Direct-Current Motor Drives
Park, B.-G., Lee, K., Kim, R.-Y., Kim, T., Ryu, J.-S., & Hyun, D.-S. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072895 · Cited by 93
Design and evaluation of voltage measurement-based sectoral diagnosis method for inverter open switch faults of permanent magnet synchronous motor drives
Choi, C., & Lee, W. (2012) · IET Electric Power Applications · doi:10.1049/iet-epa.2011.0315 · Cited by 91
Fault-Tolerant Control Performance Comparison of Three- and Five-Phase PMSG for Marine Current Turbine Applications
Mekri, F., Elghali, S. B., & Benbouzid, M. (2012) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2227126 · Cited by 85
DC–AC Converter-Fed Induction Motor Drive With Fault-Tolerant Capability Under Open- and Short-Circuit Switch Failures
Farhadi, M., Fard, M. T., Abapour, M., & Hagh, M. T. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2683534 · Cited by 84
A Single Method for Multiple IGBT, Current, and Speed Sensor Faults Diagnosis in Regenerative PMSM Drives
Jlassi, I., & Cardoso, A. J. M. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2918062 · Cited by 78
A Control Reconfiguration Strategy for Post-Sensor FTC in Induction Motor-Based EVs
Tabbache, B., Rizoug, N., Benbouzid, M., & Kheloui, A. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2232325 · Cited by 77
Application of intelligent tools to detect and classify broken rotor bars in three‐phase induction motors fed by an inverter
Godoy, W. F., da Silva, I. N., Goedtel, A., Palácios, R. H. C., & Lopes, T. D. (2016) · IET Electric Power Applications · doi:10.1049/iet-epa.2015.0469 · Cited by 74
Robust fault-tolerant control of networked control systems with stochastic actuator failure
Peng, C., Yang, T., & Tian, E. (2010) · IET Control Theory and Applications · doi:10.1049/iet-cta.2009.0427 · Cited by 73
Investigation of a Novel 24-Slot/14-Pole Six-Phase Fault-Tolerant Modular Permanent-Magnet In-Wheel Motor for Electric Vehicles
Zheng, P., Wu, F., Lei, Y., Sui, Y., & Yu, B. (2013) · Energies · doi:10.3390/en6104980 · Cited by 70
Speed Sensor Fault Tolerant PMSM Machines: From Position-Sensorless to Sensorless Control
Verrelli, C. M., Bifaretti, S., Carfagna, E., Lidozzi, A., Solero, L., Crescimbini, F., & Benedetto, M. D. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2908337 · Cited by 68
A Survey on Fault Diagnosis and Fault Tolerant Methodologies for Permanent Magnet Synchronous Machines
Bhuiyan, E. A., Akhand, M. M. A., Das, S. K., Ali, M. F., Tasneem, Z., Islam, M. R., Saha, D. K., Badal, F. R., Ahamed, M. H., & Moyeen, S. I. (2020) · International Journal of Automation and Computing · doi:10.1007/s11633-020-1250-3 · Cited by 68
Robust fault diagnosis scheme for open-circuit faults in voltage source inverters feeding induction motors by using non-linear proportional-integral observers
Espinoza-Trejo, D. R., Campos-Delgado, D. U., Bárcenas, E., & Martínez-López, F. J. (2012) · IET Power Electronics · doi:10.1049/iet-pel.2011.0309 · Cited by 67
Self-citation
Multiple-fault diagnosis in induction motors through support vector machine classification at variable operating conditions
Martínez-Morales, J. D., Palacios-Hernandez, E. R., & Campos-Delgado, D. U. (2016) · Electrical Engineering · doi:10.1007/s00202-016-0487-x · Cited by 66
Self-citation
Wavelet fault diagnosis and tolerant of induction motor: A review
Gaeid, K. S., & Ping, H. W. (2011) · International Journal of the Physical Sciences · doi:10.5897/ijps10.632 · Cited by 65
Research on Vector Control Strategy of Surface-mounted Permanent Magnet Synchronous Machine Drive System with High-Resistance Connection
Hang, J., Xia, M., Ding, S., Li, Y., Sun, L., & Wang, Q. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2918683 · Cited by 64
Integration of Interturn Fault Diagnosis and Torque Ripple Minimization Control for Direct-Torque-Controlled SPMSM Drive System
Hang, J., Ding, S., Ren, X., Hu, Q., Huang, Y., Hua, W., & Wang, Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3073774 · Cited by 59
A new method for modeling and vector control of unbalanced induction motors
Jannati, M., Idris, N. R. N., & Salam, Z. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342483 · Cited by 59
Smooth Fault-Tolerant Control of Induction Motor Drives With Sensor Failures
Liu, Y., Stettenbenz, M., & Bazzi, A. M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2848964 · Cited by 57
An improved fault-tolerant control scheme for PWM inverter-fed induction motor-based EVs
Tabbache, B., Benbouzid, M., Kheloui, A., Bourgeot, J., & Mamoune, A. (2013) · ISA Transactions · doi:10.1016/j.isatra.2013.07.004 · Cited by 56
Integration of Interturn Fault Diagnosis and Fault-Tolerant Control for PMSM Drive System
Hang, J., Sun, W., Hu, Q., Ren, X., & Ding, S. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3134821 · Cited by 55
Fault-Tolerant Five-Leg Converter Topology With FPGA-Based Reconfigurable Control
Shahbazi, M., Poure, P., Saadate, S., & Zolghadri, M. R. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2191754 · Cited by 54
Observer-Based Phase-Shift Fault Detection Using Adaptive Threshold for Rotor Position Sensor of Permanent-Magnet Synchronous Machine Drives in Electromechanical Brake
Choi, C., Lee, K., & Lee, W. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350453 · Cited by 53
Active Common-Mode Voltage-Based Open-Switch Fault Diagnosis of Inverters in IM-Drive Systems
Cheng, Y., Sun, Y., Li, X., Dan, H., Lin, J., & Su, M. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2965430 · Cited by 53
Single-Phase to Three-Phase Drive System Using Two Parallel Single-Phase Rectifiers
Jacobina, C. B., dos Santos, E. C., Rocha, N., & Fabrício, E. L. L. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2037420 · Cited by 52
Online Diagnosis and Localization of High-Resistance Connection in PMSM With Improved Fault Indicator
Zhang, J., Hang, J., Ding, S., & Cheng, M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2587670 · Cited by 49
Control and operation of fault-tolerant flux-switching permanent-magnet motor drive with second harmonic current injection
Zhao, W., Cheng, M., Chau, K. T., & Chan, C. C. (2012) · IET Electric Power Applications · doi:10.1049/iet-epa.2011.0144 · Cited by 48
Fault diagnosis in grid‐connected PV NPC inverters by a model‐based and data processing combined approach
Pecina-Sánchez, J. Á., Campos-Delgado, D. U., Espinoza-Trejo, D. R., Fernández, A., & Angelo, C. H. D. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2018.5237 · Cited by 47
Self-citation
Fault-Tolerant Control of Position Signals for Switched Reluctance Motor Drives
Shao, J., Deng, Z., & Gu, Y. X. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2669190 · Cited by 46
Online fault-detecting scheme of an inverter-fed permanent magnet synchronous motor under stator winding shorted turn and inverter switch open
Kim, K., Gu, B.-G., & Jung, I.-S. (2011) · IET Electric Power Applications · doi:10.1049/iet-epa.2010.0272 · Cited by 45
Sensor fault detection and isolation in doubly-fed induction generators accounting for parameter variations
Gálvez-Carrillo, M., & Kinnaert, M. (2010) · Renewable Energy · doi:10.1016/j.renene.2010.10.021 · Cited by 44
Fault-tolerant cruise control of electric vehicles with induction motors
Marino, R., Scalzi, S., Tomei, P., & Verrelli, C. M. (2013) · Control Engineering Practice · doi:10.1016/j.conengprac.2013.02.011 · Cited by 44
Speed sensor fault tolerant controller design for induction motor drive in EV
Aouaouda, S., Chadli, M., & Boukhnifer, M. (2016) · Neurocomputing · doi:10.1016/j.neucom.2016.06.001 · Cited by 43
Online Voltage Sensorless High-Resistance Connection Diagnosis in Induction Motor Drives
de la Barrera, P. M., Bossio, G. R., & Leidhold, R. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2385038 · Cited by 38
DSPACE‐based implementation for observer backstepping power control of DFIG wind turbine
Bossoufi, B., Karim, M., Taoussi, M., Aroussi, H. A., Bouderbala, M., Motahhir, S., & Camara, M. B. (2020) · IET Electric Power Applications · doi:10.1049/iet-epa.2020.0364 · Cited by 38
Sensor fault detection and isolation in three-phase systems using a signal-based approach
Gálvez-Carrillo, M., & Kinnaert, M. (2010) · IET Control Theory and Applications · doi:10.1049/iet-cta.2009.0536 · Cited by 37
Open-Phase Fault Detection in Delta-Connected PMSM Drive Systems
Hang, J., Ding, S., Zhang, J., Cheng, M., & Wang, Q. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2772793 · Cited by 35
Current sensors fault detection and tolerant control strategy for three-phase induction motor drives
Azzoug, Y., Sahraoui, M., Pusca, R., Ameid, T., Romary, R., & Cardoso, A. J. M. (2020) · Electrical Engineering · doi:10.1007/s00202-020-01120-5 · Cited by 35
Alternating Current Drives in the Steel Industry
Chattopadhyay, A. K. (2010) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2010.938719 · Cited by 33
Two current sensor fault detection and isolation schemes for induction motor drives using algebraic estimation approach
Rkhissi-Kammoun, Y., Ghommam, J., Boukhnifer, M., & Mnif, F. (2018) · Mathematics and Computers in Simulation · doi:10.1016/j.matcom.2018.09.010 · Cited by 33
Open-circuit switch fault tolerant wind energy conversion system based on six/five-leg reconfigurable converter
Shahbazi, M., Saadate, S., Poure, P., & Zolghadri, M. R. (2016) · Electric Power Systems Research · doi:10.1016/j.epsr.2016.04.004 · Cited by 32
Fast fault detection, isolation and reconfiguration in fault-tolerant permanent magnet synchronous motor drives
Estima, J. O., & Cardoso, A. J. M. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342310 · Cited by 31
Fault Modeling, Estimation, and Fault-Tolerant Steering Logic Design for Single-Gimbal Control Moment Gyro
Shen, Q., Yue, C., Yu, X. Y., & Goh, C.-H. (2020) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2020.2971959 · Cited by 29
Common Predictive Model for PMSM Drives With Interturn Fault Considering Torque Ripple Suppression
Li, W., Hang, J., Ding, S., & Wang, Q. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3232820 · Cited by 28
Sensorless fault tolerant control for induction motors
Djeghali, N., Ghanes, M., Djennoune, S., & Barbot, J. (2013) · International Journal of Control Automation and Systems · doi:10.1007/s12555-012-9224-z · Cited by 27
A Review on the Development of High-Reliability Motor System for Safety-Critical Applications—From Redundancy Design Prospective
Sun, P., Jia, S., Liang, D., & Qu, R. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3340750 · Cited by 26
New fault-tolerant flux-mnemonic doubly-salient permanent-magnet motor drive
Yu, C., & Chau, K. T. (2011) · IET Electric Power Applications · doi:10.1049/iet-epa.2009.0300 · Cited by 26
Reversible AC Drive Systems Based on Parallel AC–AC DC-Link Converters
Jacobina, C. B., dos Santos, E. C., Rocha, N., Gouveia, B. D. S., & da Silva, E. R. C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049724 · Cited by 26
Augmented-State-Observer-Based Diagnostics of Open-Circuit and Sensor Faults in DFIG Wind Turbines
Yahiaoui, M.-A., Kinnaert, M., & Gyselinck, J. J. C. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3309737 · Cited by 25
Wavelet Entropy-Based Traction Inverter Open Switch Fault Diagnosis in High-Speed Railways
Hu, K., Liu, Z., & Lin, S. (2016) · Entropy · doi:10.3390/e18030078 · Cited by 25
SENSOR FAULTS DETECTION AND ESTIMATION FOR A DFIG EQUIPPED WIND TURBINE
Abdelmalek, S., Rezazi, S., & Azar, A. T. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.11.164 · Cited by 25
Open-transistor Fault Detection and Diagnosis Based on Current Trajectory in a Two-level Voltage Source Inverter
Raj, N., Mathew, J., Jagadanand, G., & George, S. (2016) · Procedia Technology · doi:10.1016/j.protcy.2016.08.159 · Cited by 24
Dynamic Modeling of a Five-Phase Induction Machine With a Combined Star/Pentagon Stator Winding Connection
Abdel-Khalik, A. S., Ahmed, S., & Massoud, A. M. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2016.2565819 · Cited by 22
Research on fault analysis and fault-tolerant control of EV/HEV powertrain
Tabbache, B., Kheloui, A., Benbouzid, M., Mamoune, A., & Diallo, D. (2014) · International Conference on Green Energy (ICGE) · doi:10.1109/icge.2014.6835436 · Cited by 19
Detection and isolation of open-switch and current sensor faults in PMSM drives, through stator current analysis
Khil, S. K. E., Jlassi, I., Estima, J. O., Bellaaj, N. M., & Cardoso, A. J. M. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062382 · Cited by 19
Influence of direct‐connected inverter with one power switch open circuit fault on electromagnetic field and temperature field of permanent magnet synchronous motor
Li, W., Lin, L., Gao, H., Li, D., Zhang, X., & Fan, Y. (2018) · IET Electric Power Applications · doi:10.1049/iet-epa.2017.0631 · Cited by 19
Adjusted electrical equivalent circuit model of induction motor with broken rotor bars and eccentricity faults
Petrov, A., Владимирович, П. И., Rassõlkin, A., Vaimann, T., Kallaste, A., & Belahcen, A. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062334 · Cited by 18
Control of Three-Phase Induction Machine Drives During Open-Circuit Fault: A Review
Tabasian, R., Ghanbari, M., Esmaeli, A., & Jannati, M. (2020) · IETE Journal of Research · doi:10.1080/03772063.2020.1724833 · Cited by 18
Quantitative Fault Severity Estimation for High-Resistance Connection in PMSM Drive System
Hang, J., Yan, D., Xia, M., Ding, S., & Wang, Q. (2019) · IEEE Access · doi:10.1109/access.2019.2901121 · Cited by 18
Steady-state speed sensor fault detection in induction motors with uncertain parameters: A matter of algebraic equations
Verrelli, C. M., Lorenzani, E., Fornari, R., Mengoni, M., & Zarri, L. (2018) · Control Engineering Practice · doi:10.1016/j.conengprac.2018.08.016 · Cited by 17
A Comprehensive Review of Universal Fast-Charging Techniques for 400-V and 800-V Electric Vehicles
Sadi, M. H., Sadeghi, Z., & Bauman, J. (2025) · IEEE Access · doi:10.1109/access.2025.3603845 · Cited by 21
PWM inverter-fed induction motor-based electrical vehicles fault-tolerant control
Tabbache, B., Benbouzid, M., Kheloui, A., Bourgeot, J., & Mamoune, A. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700506 · Cited by 16
Hybrid Electric Vehicle Fault Tolerant Control
Meyer, R. T., Johnson, S. C., DeCarlo, R. A., Pekarek, S., & Sudhoff, S. D. (2017) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.4037270 · Cited by 16
Induction motor windings faults detection using flux-error based MRAS estimators
Bednarz, S. A., & Dybkowski, M. (2019) · Diagnostyka · doi:10.29354/diag/109092 · Cited by 16
Neural network approach for stator current sensor fault detection and isolation for vector controlled induction motor drive
Klimkowski, K., & Dybkowski, M. (2016) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2016.7752143 · Cited by 16
Moving Integration Filter-Based Open-Switch Fault-Diagnosis Method for Three-Phase Induction Motor Drive Systems
Shi, S., Sun, Y., Li, X., Dan, H., & Su, M. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.2999692 · Cited by 15
Optimized OP-FTC for SPMSM Considering Copper Loss Minimization
Ding, S., Ma, K., Fan, J., Hang, J., & Tan, H. (2022) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2022.3162647 · Cited by 14
DSP-based sensor fault-tolerant control of electric vehicle powertrains
Tabbache, B., Benbouzid, M., Kheloui, A., & Bourgeot, J. (2011) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2011.5984482 · Cited by 14
Speed and Current Sensor Fault-Tolerant-Control of the Induction Motor Drive
Dybkowski, M., Klimkowski, K., & Orłowska-Kowalska, T. (2016) · Studies in systems, decision and control · doi:10.1007/978-3-319-45735-2_7 · Cited by 14
Cost-Efficient Fault-Tolerant Scheme for Three-Phase Surface-Mounted Permanent Magnet Synchronous Machines Fed by Multifunctional Converter System Under Open-Phase Faults
Zhang, X., Gauthier, J.-Y., & Lin-Shi, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3094478 · Cited by 14
DSP-Based Sensor Fault Detection and Post Fault-Tolerant Control of an Induction Motor-Based Electric Vehicle
Tabbache, B., Benbouzid, M., Kheloui, A., & Bourgeot, J. (2012) · International Journal of Vehicular Technology · doi:10.1155/2012/608381 · Cited by 14
Wind energy conversion system based on DFIG with open switch fault tolerant six-legs AC-DC-AC converter
Shahbazi, M., Zolghadri, M. R., Poure, P., & Saadate, S. (2013) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2013.6505922 · Cited by 14
Design and analysis of a dual‐mode flux‐switching doubly salient DC‐field magnetless machine for wind power harvesting
Lee, C. H. T., Chau, K. T., & Liu, C. (2015) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2014.0414 · Cited by 14
Neural Network Based Fault Diagnosis of Three Phase Inverter Fed Vector Control Induction Motor
Chérif, B. D. E., Bendiabdellah, A., Bendjebbar, M., & Tamer, A. (2019) · Periodica Polytechnica Electrical Engineering and Computer Science · doi:10.3311/ppee.14315 · Cited by 14
Detection and Diagnosis of Stator and Rotor Electrical Faults for Three-Phase Induction Motor via Wavelet Energy Approach
Hussein, A. M., Obed, A. A., Zubo, R. H. A., Al‐Yasir, Y. I. A., Saleh, A. L., Fadhel, H., Sheikh-Akbari, A., Mokryani, G., & Abd‐Alhameed, R. A. (2022) · Electronics · doi:10.3390/electronics11081253 · Cited by 14
Mitigation of high-resistance connection in surface-mounted PMSM drive system based on model predictive current control
Chen, F., Fan, J., Li, W., Fang, J., & Ding, S. (2022) · Results in Engineering · doi:10.1016/j.rineng.2022.100590 · Cited by 13
Modulation Effects in an Inverter Fed Nine-Phase Induction Motor Drive
Bastos, R. R., de Souza, T. S., & Filho, B. J. C. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2938739 · Cited by 13
Behavior of electric vehicles and traction drives during sensor faults
Aguilera, F., de la Barrera, P. M., & Angelo, C. H. D. (2012) · IEEE International Conference on Industry Applications · doi:10.1109/induscon.2012.6453764 · Cited by 13
Survey on Fault-Tolerant Diagnosis and Control Systems Applied to Multi-motor Electric Vehicles
da Silveira, A. M. M., Araújo, R. E., & de Castro, R. P. (2011) · IFIP International Federation for Information Processing/IFIP · doi:10.1007/978-3-642-19170-1_39 · Cited by 12
Efficiency evaluation of fault-tolerant operating strategies applied to three-phase permanent magnet synchronous motor drives
Estima, J. O., & Cardoso, A. J. M. (2012) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2012.6350221 · Cited by 12
Single-Observer Based Current Sensor Fault Tolerant Control for IM Traction Drives
Venghi, L. E., Aguilera, F., de la Barrera, P. M., & Angelo, C. H. D. (2021) · IEEE Latin America Transactions · doi:10.1109/tla.2021.9480151 · Cited by 12
Detection and isolation of actuator faults for a class of non-linear systems with application to electric motors drives
Espinoza-Trejo, D. R., & Campos-Delgado, D. U. (2009) · IET Control Theory and Applications · doi:10.1049/iet-cta.2008.0377 · Cited by 12
Self-citation

Authors: Campos-Delgado, D. U., Espinoza-Trejo, D. R., & Palacios, E.
Affiliations: Autonomous University of San Luis Potosí (MX)
ORCID: Campos-Delgado, D.U.
Espinoza-Trejo, D.R.
Venue: IET Electric Power Applications
Publisher: Institution of Engineering and Technology (IET)
Published: 2008-03
Volume: 2
Issue: 2
Pages: 121-134
ISSN: 1751-8660 (ISSN-L)
1751-8679
DOI: 10.1049/iet-epa:20070203
OpenAlex: W2154152725
Cited by: 228
References: 81
Citations by year: 2026: 1 · 2025: 3 · 2024: 5 · 2023: 7 · 2022: 10 · 2021: 15 · 2020: 18 · 2019: 23 · 2018: 14 · 2017: 15 · 2016: 24 · 2015: 10 · 2014: 12 · 2013: 18 · 2012: 19
FWCI: 10.18
Type: journal article
Language: en
Open access: closed
Locations: IET Electric Power Applications (publishedVersion)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
Keywords: fault-tolerant control, variable frequency drive, DC motor, induction motor, fault diagnosis, fault accommodation, hardware reconfiguration, model-based fault diagnosis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Fault-tolerant control in variable speed drives: a survey

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks