Wavelet-based switching faults detection in direct torque control induction motor drives
The DOI matches its Crossref record.
Abstract
This study describes a method of detection and identification of IGBT-based drive open-circuit faults in direct torque control (DTC) induction motor drives. The detection mechanism is based on wavelet decomposition. The Symlet2 wavelet was selected as the wavelet base to perform stator current analysis during transients. In this method, the stator currents will be used as an input to the system. The MATLAB program was used to process discreet wavelet transform (DWT) of the signals. The stator current was used for the detection of the fault. When an open-circuit fault appears in an inverter IGBT, the signal fault information is included in each frequency region. There are spikes in the sixth level detail for incipient faults. The time of the spikes in the DWT is correlated with the time of fault. As a result of time domain studies, a faulty system can be easily discriminated from a healthy one. In this study the analysis of electrical transients arising during switch open-circuit faults in a three-phase power inverter feeding DTC induction motor drives was decomposed using the wavelet transform. The results demonstrate that the proposed fault detection and diagnosis system has very good capabilities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377
“The localization of the faulty switch can also be performed by the analysis of the current space vector trajectory diameter [14]-[15].”
MethodAli, M. Z., Shabbir, M. N. S. K., Liang, X., Zhang, Y., & Hu, T. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2895797 · Cited by 349
Jlassi, I., Estima, J. O., El Khil, S. K., Bellaaj, N. M., & Cardoso, A. J. M. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2616398 · Cited by 284
“Artificial-intelligence-based approaches like neural network [16], fuzzy network [17], [12], and wavelet based methods [18]– [20] allow smart diagnosis with no need of a system model.”
BackgroundJlassi, I., Estima, J. O., Khojet El Khil, S., Mrabet Bellaaj, N., & Marques Cardoso, A. J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2342506 · Cited by 212
“The analysis of the second-order harmonic component in the q-axis or the discrete wavelet transform can also be effectively used for voltage source inverter open-circuit faults diagnosis [29], [30].”
Method
Metadata
- Authors
- Aktas, M., & Turkmenoglu, V.
- Venue
- IET Science, Measurement & Technology
- Published
- 2010-11-03
- Volume
- 4
- Issue
- 6
- Pages
- 303-310
- ISSN
- 1751-8822 (ISSN-L)
- 1751-8830
- OpenAlex
- W1998408918
- Cited by
- 77
- References
- 0
- FWCI
- 9.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Wavelet-based switching faults detection in direct torque control induction motor drives. https://app.cochat.ai/papers/10.1049/iet-smt.2009.0121
- The paper
- Aktas, M., & Turkmenoglu, V. (2010). Wavelet-based switching faults detection in direct torque control induction motor drives. IET Science, Measurement & Technology. https://doi.org/10.1049/iet-smt.2009.0121
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.