The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Novel high-efficiency step-up converter
Abstract
As a result of the equivalent series resistor of the boost inductor, conventional boost converters are not able to provide high voltage gain. A high-efficiency high step-up converter is proposed, with low voltage stress on power switch, power diodes and output capacitors. The circuit topology of the proposed converter consists of an energy clamp circuit and a voltage boost cell. The boost converter functions as an active clamp circuit to suppress the voltage spike on power switch during the turn-off transient period. The boost converter output terminal and flyback converter output terminal are serially connected to increase the output voltage gain with the coupled inductor. By serially connecting the secondary windings of the boost inductor, a high voltage gain is achieved with less voltage stress on the power devices, such as power MOSFETs and power diodes. The operational principle and steady-state analysis are described. A 35 W converter with simulation and experimental results is presented to demonstrate the performance. It shows that the efficiency of the proposed converter is very high (nearly 93%) with four times the voltage output.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2020) · Springer eBooks · doi:10.1007/978-3-030-43881-4 · Cited by 5,420
Rashid, R. (1988) · Cited by 2,641
A new improved boost converter with ripple free input current using coupled inductors
Cheng, D. K. W. (1998) · International Conference on Power Electronics and Variable Speed Drives (PEVD) · doi:10.1049/cp:19980592 · Cited by 40
Cited by
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
Self-citationHigh Step-Up Converter With Coupled-Inductor
Wai, R.-J., & Duan, R.-Y. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854023 · Cited by 611
Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0605 · Cited by 591
High-Performance Stand-Alone Photovoltaic Generation System
Wai, R.-J., Wang, W.-H., & Lin, C.-Y. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.896049 · Cited by 453
High-Efficiency DC-DC Converter With High Voltage Gain and Reduced Switch Stress
Wai, R.-J., Lin, C.-Y., Duan, R.-Y., & Chang, Y.-R. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888794 · Cited by 450
Boost Converter With Coupled Inductors and Buck–Boost Type of Active Clamp
Wu, T.-F., Lai, Y.-S., Hung, J.-C., & Chen, Y.-M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.903925 · Cited by 425
A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications
Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2090362 · Cited by 412
Self-citationA Family of Single-Switch PWM Converters With High Step-Up Conversion Ratio
Ismail, E. H., Al-Saffar, M. A., Sabzali, A. J., & Fardoun, A. A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916427 · Cited by 359
Novel High Step-Up DC–DC Converter With Coupled-Inductor and Switched-Capacitor Techniques
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2151828 · Cited by 326
Self-citationA High Step-Up Converter With a Voltage Multiplier Module for a Photovoltaic System
Tseng, K.-C., Huang, C.-C., & Shih, W.-Y. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2217157 · Cited by 272
Self-citationAnalysis of integrated boost-flyback step-up converter
Liang, T. J., & Tseng, K. C. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045003 · Cited by 263
Self-citation
Metadata
- Authors
- Tseng, K. C., & Liang, T. J.
- Venue
- IEE Proceedings - Electric Power Applications
- Published
- 2004-03-09
- Volume
- 151
- Issue
- 2
- Pages
- 182-190
- ISSN
- 1350-2352 (ISSN-L)
- 1359-7043
- OpenAlex
- W2049127576
- Cited by
- 435
- References
- 3
- FWCI
- 7.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.