The DOI matches its Crossref record.
Pollutant Concentrations in Road Runoff: Southeast Queensland Case Study
Abstract
This paper discusses the results of research into the pollutants in runoff from road pavement surfaces following natural rainfall events. Road runoff water quality was monitored at 21 sites centering around Brisbane, in southeast Queensland, Australia. The sites were selected according to traffic volumes, surrounding land use, pavement surface type, ease of access, and commercial vehicle percentage. Bridge sites were chosen for convenience of sample collection and minimized infrastructure modification. “First flush” grab samplers were permanently installed at each site to collect the first 20 L of runoff from one of the bridge drainage scuppers. The runoff samples were tested for a number of heavy metals, hydrocarbons, pesticides, and other physical characteristics. The observed results fall within the ranges of concentrations reported internationally and nationally but do not typically follow the “30,000 average annual daily traffic” results reported in the United States. Traffic volumes have not been found to be the best indicator of road runoff pollutant concentrations. Interevent duration has been found to be a statistically significant factor for pollutant concentrations. Sites incorporating exit lanes have recorded higher concentrations of acid-extractable copper and zinc, tending to support the hypothesis that brake pad and tire wear caused by rapid deceleration contributes to the concentrations of these metals in road runoff. Laser particle sizing has shown that a significant proportion of the sediment found in the runoff is <100 μm. However, these particulates do settle in water within 24 h, under laboratory conditions. This may be due to the presence of heavy metals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Storm water runoff concentration matrix for urban areas
Göbel, P., Dierkes, C., & Coldewey, W. G. (2007) · Journal of Contaminant Hydrology · doi:10.1016/j.jconhyd.2006.08.008 · Cited by 667
Huber, M., Welker, A., & Helmreich, B. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2015.09.033 · Cited by 389
Metals Removal from Stormwater by Commercial and Non‐Commercial Granular Activated Carbons
van Lienden, C., Shan, L., Rao, S., Ranieri, E., & Young, T. M. (2010) · Water Environment Research · doi:10.2175/106143009x12487095236874 · Cited by 37
Nie, F.-H., Li, T., Yao, H.-F., Feng, M., & Zhang, G.-K. (2008) · Journal of Zhejiang University-SCIENCE A · doi:10.1631/jzus.a0820271 · Cited by 30
Highway runoff quality models for the protection of environmentally sensitive areas
Trenouth, W. R., & Gharabaghi, B. (2016) · Journal of Hydrology · doi:10.1016/j.jhydrol.2016.08.058 · Cited by 26
Metadata
- Authors
- Drapper, D., Tomlinson, R., & Williams, P.
- Venue
- Journal of Environmental Engineering
- Published
- 2000-04
- Volume
- 126
- Issue
- 4
- Pages
- 313-320
- ISSN
- 0733-9372 (ISSN-L)
- 1943-7870
- DOI
- 10.1061/(asce)0733-9372(2000)126:4(313
- OpenAlex
- W2103115463
- Cited by
- 186
- References
- 0
- FWCI
- 5.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pollutant Concentrations in Road Runoff: Southeast Queensland Case Study. https://app.cochat.ai/papers/10.1061/(asce)0733-9372(2000)126:4(313
- The paper
- Drapper, D., Tomlinson, R., & Williams, P. (2000). Pollutant Concentrations in Road Runoff: Southeast Queensland Case Study. Journal of Environmental Engineering. https://doi.org/10.1061/(asce)0733-9372(2000)126%3A4(313
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.