Workability Loss and Compressive Strength Development of Cementless Mortars Activated by Combination of Sodium Silicate and Sodium Hydroxide
The DOI matches its Crossref record.
Abstract
To explore the significance and shortcomings of an environment-friendly binder using powder typed activators, 16 alkali-activated (AA) cementless mortars and a control ordinary Portland cement (OPC) mortar were mixed, cured under room temperature, and tested. Both fly ash (FA) and ground granulated blast-furnace slag (GGBS) as the source material were activated by a combination of sodium silicate and sodium hydroxide powders. The main variables examined were the mixing ratio of sodium oxide (Na2O) of the activators to source material by weight, and the Blain fineness of the GGBS. The flow loss and compressive strength development of the mortars tested were examined according to the alkali quality coefficient explaining the silicon oxide-to-sodium oxide ratio (SiO2∕Na2O) in an alkaline activator, and the silicon oxide-to-aluminum oxide (SiO2∕Al2O3) ratio and calcium content in the source material. The hydration products and microstructural characteristics of the AA pastes sampled from AA mortars were also investigated to evaluate the effect of the type and fineness of source material on the compressive strength of the AA mortar. The measured compressive strength development of the AA mortars was compared with an empirical equation for OPC concrete specified in ACI 209. The test results show that the flow loss and compressive strength development of the AA mortars are significantly dependent on the alkali quality coefficient and the fineness of the source material. Although no meaningful compressive strength develops in the FA-based AA mortars, the 28day compressive strength of the GGBS-based AA mortars having an alkali quality coefficient of 0.023 is comparable to that of the control OPC mortar, showing that the higher the fineness of GGBS, the higher the compressive strength of AA mortars. Scanning electron microscope image and x-ray diffraction clearly shows that the surface density of the calcium silicate hydrates gel in the GGBS-based AA pastes increased with the increase of fineness of the GGBS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Drying shrinkage in alkali-activated binders – A critical review
Mastali, M., Kinnunen, P., Dalvand, A., Mohammadi Firouz, R., & Illikainen, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.125 · Cited by 468
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2015) · Ceramics International · doi:10.1016/j.ceramint.2014.12.154 · Cited by 426
Metadata
- Authors
- Yang, K.-H., & Song, J.-K.
- Venue
- Journal of Materials in Civil Engineering
- Published
- 2009-03
- Volume
- 21
- Issue
- 3
- Pages
- 119-127
- ISSN
- 0899-1561 (ISSN-L)
- 1943-5533
- DOI
- 10.1061/(asce)0899-1561(2009)21:3(119
- OpenAlex
- W2018712103
- Cited by
- 157
- References
- 0
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Workability Loss and Compressive Strength Development of Cementless Mortars Activated by Combination of Sodium Silicate and Sodium Hydroxide. https://app.cochat.ai/papers/10.1061/(asce)0899-1561(2009)21:3(119
- The paper
- Yang, K.-H., & Song, J.-K. (2009). Workability Loss and Compressive Strength Development of Cementless Mortars Activated by Combination of Sodium Silicate and Sodium Hydroxide. Journal of Materials in Civil Engineering. https://doi.org/10.1061/(asce)0899-1561(2009)21%3A3(119
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.