The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Model Updating of Railway Bridge Using In Situ Dynamic Displacement Measurement under Trainloads
Abstract
To address the need for monitoring aging railway bridges, this paper presents a finite-element (FE) model updating approach using time-domain optimization based on in situ measurement of the bridge’s dynamic displacement histories under trainloads. Field tests are performed on a short-span plate girder railway bridge to measure its displacement response to freight trainloads with different speeds using a low-cost remote vision sensor recently developed by the authors’ group. A FE model of the bridge is developed considering train–track–bridge dynamic interactions. Sensitivity analysis is carried out to investigate the intrinsic effects of parameters of the train, track, and bridge subsystems on the dynamic response of the bridge. It is found that the bridge displacement response is primarily sensitive to the stiffness of the bridge, whereas the acceleration response is affected by many other parameters. This justifies that the bridge dynamic displacement is more suited than acceleration for updating the railway bridge stiffness. Consequently, a model updating approach is proposed using the measurement of bridge displacement response to trainloads. This approach is applied to the short-span bridge to first identify the train speed, followed by the bridge stiffness by minimizing the error between the measured and computed displacement time histories. Furthermore, this paper investigates the frequency characteristics from both the measured and computed displacements. The analysis shows that the trainload does not excite the bridge’s natural modes of vibration because the frequency is much lower than the bridge’s natural frequencies. Therefore, it is difficult to use the modal identification-based FE model updating methods based on the dynamic response measurement. This is commonly the case for short-span railway bridges, which tend to have high natural frequencies. The proposed periodic displacement measurement and time-domain FE model updating can be developed into an effective tool for long-term structural health monitoring of short-span railway bridges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vehicle-bridge interaction dynamics and potential applications
Yang, Y. B., & Lin, C. W. (2005) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.06.032 · Cited by 419
Cited by
Feng, D., & Feng, M. Q. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2017.11.018 · Cited by 782
Self-citationTrain–track–bridge dynamic interaction: a state-of-the-art review
Zhai, W., Han, Z., Chen, Z., Ling, L., & Zhu, S. (2019) · Vehicle System Dynamics · doi:10.1080/00423114.2019.1605085 · Cited by 485
Review of finite element model updating methods for structural applications
Ereiz, S., Duvnjak, I., & Fernando Jiménez-Alonso, J. (2022) · Structures · doi:10.1016/j.istruc.2022.05.041 · Cited by 371
Review of machine-vision based methodologies for displacement measurement in civil structures
Xu, Y., & Brownjohn, J. M. W. (2018) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-017-0261-4 · Cited by 357
Experimental validation of cost-effective vision-based structural health monitoring
Feng, D., & Feng, M. Q. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.11.021 · Cited by 355
Self-citation
Metadata
- Authors
- Feng, D., & Feng, M. Q.
- Venue
- Journal of Bridge Engineering
- Published
- 2015-12
- Volume
- 20
- Issue
- 12
- ISSN
- 1084-0702 (ISSN-L)
- 1943-5592
- OpenAlex
- W1998672769
- Cited by
- 163
- References
- 1
- FWCI
- 18.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Model Updating of Railway Bridge Using In Situ Dynamic Displacement Measurement under Trainloads. https://app.cochat.ai/papers/10.1061/(asce)be.1943-5592.0000765
- The paper
- Feng, D., & Feng, M. Q. (2015). Model Updating of Railway Bridge Using In Situ Dynamic Displacement Measurement under Trainloads. Journal of Bridge Engineering. https://doi.org/10.1061/(asce)be.1943-5592.0000765
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.