The DOI matches its Crossref record.
Performance Test of Wireless Technologies for Personnel and Equipment Proximity Sensing in Work Zones
Abstract
The dynamic nature and limited work space of roadway work zones contribute to dangerous working environments for construction workers. This environment can result in hazardous proximity situations because pedestrian workers are required to operate in close proximity to heavy construction equipment. A total of 609 work zone personnel fatalities were reported in 2012. Previous analysis of work zone fatality data found that the majority of the pedestrian worker and mobile object struck-by fatalities resulted when pedestrian workers were struck by construction equipment. These statistics indicate that current safety practices for pedestrian workers and equipment operators are inadequate. The objective of this study was to create and evaluate a proximity detection and alert system using Bluetooth sensing technology. The scope included hazardous proximity situations between pedestrian workers and construction equipment in roadway work zones at grade. Evaluation metrics were implemented to assess the tested proximity sensing systems including the cost, time and ease of calibration, required hardware, system capabilities, and many others. Commercially available radio frequency identification (RFID) and magnetic field proximity sensing systems were also evaluated to provide a basis for comparison. Various interaction scenarios between pedestrian workers and construction equipment were used in the evaluation of the system. The performance evaluation based on the statistical results showed that all the tested systems were considered reliable with minimal false alarm rates. However, the magnetic system showed a significant drop in its coverage range, while still providing reliable coverage measures, with a set of tests that were more dynamic than other sets of tests. The created Bluetooth system provided the highest level of simplicity with its minimized infrastructure, ease of calibration, and ease of installation. In sum, experimental results demonstrate that the created proximity detection and alert system (1) requires minimal infrastructure; (2) provides adequate alerts to equipment operators and pedestrian workers; and (3) provides, through an alert, an additional layer of hazard avoidance in real time during hazardous-proximity situations in roadway work zones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Construction with digital twin information systems
Sacks, R., Brilakis, I., Pikas, E., Xie, H. S., & Girolami, M. (2020) · Data-Centric Engineering · doi:10.1017/dce.2020.16 · Cited by 609
Computer vision for behaviour-based safety in construction: A review and future directions
Fang, W., Love, P. E. D., Luo, H., & Ding, L. (2020) · Advanced Engineering Informatics · doi:10.1016/j.aei.2019.100980 · Cited by 346
Park, J., Kim, K., & Cho, Y. K. (2017) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0001223 · Cited by 300
Self-citationKanan, R., Elhassan, O., & Bensalem, R. (2018) · Automation in Construction · doi:10.1016/j.autcon.2017.12.033 · Cited by 288
Metadata
- Authors
- Park, J., Marks, E., Cho, Y. K., & Suryanto, W.
- Venue
- Journal of Construction Engineering and Management
- Published
- 2016-01
- Volume
- 142
- Issue
- 1
- ISSN
- 0733-9364 (ISSN-L)
- 1943-7862
- OpenAlex
- W1499199338
- Cited by
- 159
- References
- 0
- FWCI
- 20.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Performance Test of Wireless Technologies for Personnel and Equipment Proximity Sensing in Work Zones. https://app.cochat.ai/papers/10.1061/(asce)co.1943-7862.0001031
- The paper
- Park, J., Marks, E., Cho, Y. K., & Suryanto, W. (2016). Performance Test of Wireless Technologies for Personnel and Equipment Proximity Sensing in Work Zones. Journal of Construction Engineering and Management. https://doi.org/10.1061/(asce)co.1943-7862.0001031
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.