Using the Thermal Work Limit as an Environmental Determinant of Heat Stress for Construction Workers
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Construction workers are vulnerable to heat stress in summer as evidenced by deaths and injuries caused by heat stroke. Over the past centuries, many heat-stress indices have been developed to assist with the management of these problems. To address this pressing need of the industry, an enhanced model based on a multi-dimensional environmental indicator, the thermal work limit (TWL) index, is developed. Field studies were conducted between July and September 2010 in Hong Kong on ten apparently healthy and experienced construction rebar workers. Based upon 281 sets of synchronized meteorological and physiological data collected from four different construction sites, physiological, work-related, environmental, and personal parameters were measured to construct the heat-stress model. Multiple linear regression showed that a total of ten determining factors are able to predict the workers’ subjective rating of perceived exertion (RPE) (adjusted R2=0.79, p<0.05). The accuracy of the TWL heat-stress model was found to be statistically acceptable (mean absolute percentage error = 4.3%, Theil’s U inequality coefficient = 0.003). Alcohol-drinking habits, age, and work duration are the three most important predictors to determine the physiological responses of construction workers. The model reported in this paper provides a scientific prediction of the reality, which may benefit the construction industry to produce solid guidelines for workers working in hot weather.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Psychophysical scaling with applications in physical work and the perception of exertion
Borg, G. (1990) · Scandinavian Journal of Work, Environment & Health · doi:10.5271/sjweh.1815 · Cited by 1,817 · cited 1×
“Perceived exertion was assessed with Borg CR10 Scale, a 10-point single-item scale with anchors ranging from 1 ‘very very easy’ to 10 ‘maximal exertion’ (Borg 1990).”
Thermal Comfort and the Heat Stress Indices
EPSTEIN, Y., & MORAN, D. S. (2006) · Industrial Health · doi:10.2486/indhealth.44.388 · Cited by 920 · cited 1×
“Many previous research studies have estimated the stress inflicted by a wide range of work conditions and climate, and estimated the corresponding physiological strain and to combine them into a single heat stress index (Epstein and Moran 2006).”
Wet-bulb globe temperature (WBGT)—its history and its limitations
Budd, G. M. (2008) · Journal of Science and Medicine in Sport · doi:10.1016/j.jsams.2007.07.003 · Cited by 783
Jackson, A., Stanforth, P., Gagnon, J., Rankinen, T., Leon, A., Rao, D., Skinner, J., Bouchard, C., & Wilmore, J. (2002) · International Journal of Obesity · doi:10.1038/sj.ijo.0802006 · Cited by 694
Individualized model of human thermoregulation for the simulation of heat stress response
Havenith, G. (2001) · Journal of Applied Physiology · doi:10.1152/jappl.2001.90.5.1943 · Cited by 299 · cited 2×
“With an adjusted R2 value of .79 and a MAPE of 4.3%, the TWL-heat stress model which incorporates the individual’s personal characteristics and other meteorological and physiological parameters, the prediction performance of the enhanced model is considered as reliable and accurate (Havenith 2001).”
InfluentialHavenith, G., & van Middendorp, H. (1990) · European Journal of Applied Physiology and Occupational Physiology · doi:10.1007/bf00236062 · Cited by 198 · cited 3×
“No t C op ye dit ed finding reinforces the findings of Haymes et al. (1974) where they found that in the warmest environment (32.”
Influential(2007) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/mem035 · Cited by 126
Hot environment and health problems of outdoor workers at a construction site
MORIOKA, I., MIYAI, N., & MIYASHITA, K. (2006) · Industrial Health · doi:10.2486/indhealth.44.474 · Cited by 94 · cited 1×
“However, unlike most developed countries (Morioka et al. 2006; Townsend et al. 2011), there is no legal recommendation concerning the human work limit under hot weather in Hong Kong (Hu et al.”
Developing a heat stress model for construction workers
Chan, A. P. C., Yam, M. C. H., Chung, J. W. Y., & Yi, W. (2012) · Journal of Facilities Management · doi:10.1108/14725961211200405 · Cited by 89
Self-citation
Cited by
Assessing Heat Stress and Health among Construction Workers in a Changing Climate: A Review
Acharya, P., Boggess, B., & Zhang, K. (2018) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph15020247 · Cited by 237
“2013 [38] Hong Kong July–September 2010 Rebar workers aged 20–60 years (N = 10) Prospective study Participants in the study Thermal Work Limit (TWL) Ratings of perceived exertion (RPE) Environmental factors causing increase in RPE include duration of work, air pollution; personal factors include age, alcohol and smoki…”
BackgroundRowlinson, S., YunyanJia, A., Li, B., & ChuanjingJu, C. (2014) · Accident Analysis & Prevention · doi:10.1016/j.aap.2013.08.011 · Cited by 176
Al-Bouwarthan, M., Quinn, M. M., Kriebel, D., & Wegman, D. H. (2019) · Annals of Work Exposures and Health · doi:10.1093/annweh/wxz033 · Cited by 158
Optimizing work–rest schedule for construction rebar workers in hot and humid environment
Yi, W., & Chan, A. P. C. (2013) · Building and Environment · doi:10.1016/j.buildenv.2012.12.012 · Cited by 107
Self-citationYi, W., & Chan, A. P. C. (2015) · Journal of Management in Engineering · doi:10.1061/(asce)me.1943-5479.0000284 · Cited by 35
Self-citation
Metadata
- Authors
- Chan, A. P. C., Yi, W., Chan, D. W. M., & Wong, D. P.
- Venue
- Journal of Management in Engineering
- Published
- 2013-10
- Volume
- 29
- Issue
- 4
- Pages
- 414-423
- ISSN
- 0742-597X (ISSN-L)
- 1943-5479
- OpenAlex
- W2071204119
- Cited by
- 69
- References
- 9
- FWCI
- 1.89
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Using the Thermal Work Limit as an Environmental Determinant of Heat Stress for Construction Workers. https://app.cochat.ai/papers/10.1061/(asce)me.1943-5479.0000162
- The paper
- Chan, A. P. C., Yi, W., Chan, D. W. M., & Wong, D. P. (2013). Using the Thermal Work Limit as an Environmental Determinant of Heat Stress for Construction Workers. Journal of Management in Engineering. https://doi.org/10.1061/(asce)me.1943-5479.0000162
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.