The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Alkali-Activated Ground-Granulated Blast Furnace Slag for Stabilization of Marine Soft Clay
Abstract
This paper investigated the stabilization efficacy of alkali-activated ground-granulated blast furnace slag (GGBS) for a marine soft clay, compared with that of portland cement (PC). The influence of activators, including NaOH, Na2CO3, carbide slag (CS), NaOH-CS, Na2CO3-CS, and Na2SO4-CS, on the stabilization efficacy was investigated. A range of tests were conducted to investigate the properties of stabilized clays, including unconfined compressive strength (UCS), X-ray diffraction (XRD), scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP). The results indicated that Na2CO3-GGBS had no stabilization efficacy for this marine soft clay. NaOH-GGBS-stabilized clay yielded the highest UCS at 7, 28, and 90 days; however, the UCS decreased from 90 to 180 days because of the microcracking. CS-GGBS-stabilized clay had higher 90-day and 180-day UCS than that of PC-stabilized clay, but significantly lower 7-day and 28-day UCS. NaOH, Na2CO3, and Na2SO4 could enhance the strength development rate of CS-GGBS-stabilized clay. However, the UCS of NaOH-CS-GGBS and Na2CO3-CS-GGBS-stabilized clays decreased from 90 to 180 days as well. Na2SO4-CS-GGBS was found to be the optimum binder for this marine soft clay, yielding at least twice higher UCS than that of PC stabilized clay at any age studied. Considerable ettringite was produced in the Na2SO4-CS-GGBS stabilized clay, which contributed to the enhanced strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Briefing: GGBS and sustainability
Higgins, D. (2007) · Proceedings of the Institution of Civil Engineers - Construction Materials · doi:10.1680/coma.2007.160.3.99 · Cited by 132
Cited by
Akhtar, A., & Sarmah, A. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.085 · Cited by 1,250
Clayey soil stabilization using geopolymer and Portland cement
Ghadir, P., & Ranjbar, N. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.207 · Cited by 429
Clayey soil stabilization using alkali-activated volcanic ash and slag
Miraki, H., Shariatmadari, N., Ghadir, P., Jahandari, S., Tao, Z., & Siddique, R. (2022) · Journal of Rock Mechanics and Geotechnical Engineering · doi:10.1016/j.jrmge.2021.08.012 · Cited by 276
Strength and durability characteristic of alkali activated GGBS stabilized red mud as geo-material
Alam, S., Das, S. K., & Rao, B. H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.261 · Cited by 214
Investigation on Soil–Geopolymer with Slag, Fly Ash and Their Blending
Singhi, B., Laskar, A. I., & Ahmed, M. A. (2016) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-015-1677-y · Cited by 159
Metadata
- Authors
- Yi, Y., Li, C., & Liu, S.
- Venue
- Journal of Materials in Civil Engineering
- Published
- 2015-04
- Volume
- 27
- Issue
- 4
- ISSN
- 0899-1561 (ISSN-L)
- 1943-5533
- OpenAlex
- W2016076434
- Cited by
- 189
- References
- 2
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Alkali-Activated Ground-Granulated Blast Furnace Slag for Stabilization of Marine Soft Clay. https://app.cochat.ai/papers/10.1061/(asce)mt.1943-5533.0001100
- The paper
- Yi, Y., Li, C., & Liu, S. (2015). Alkali-Activated Ground-Granulated Blast Furnace Slag for Stabilization of Marine Soft Clay. Journal of Materials in Civil Engineering. https://doi.org/10.1061/(asce)mt.1943-5533.0001100
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.