The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Accuracy of Digital Surface Models and Orthophotos Derived from Unmanned Aerial Vehicle Photogrammetry
Abstract
This paper explores the influence of flight altitude, terrain morphology, and the number of ground control points (GCPs) on digital surface model (DSM) and orthoimage accuracies obtained with unmanned aerial vehicle (UAV) photogrammetry. For this study, 60 photogrammetric projects were carried out considering five terrain morphologies, four flight altitudes (i.e., 50, 80, 100, and 120 m), and three different numbers of GCPs (i.e., 3, 5, and 10). The UAV was a rotatory wing platform with eight motors, and the sensor was a nonmetric mirrorless reflex camera. The root-mean-square error (RMSE) was used to assess the accuracy of the DSM (Z component) and orthophotos (X, Y, and XY components RMSEX, RMSEY, and RMSEXY, respectively). The results show that RMSEX, RMSEY, and RMSEXY were not influenced by flight altitude or terrain morphology. For horizontal accuracy, differences between terrain morphologies were observed only when 5 or 10 GCPs were used, which were the best accuracies for the flattest morphologies. Nevertheless, the number of GCPs influenced the horizontal accuracy; as the number of GCPs increased, the accuracy improved. Vertical accuracy was not influenced by terrain morphology, but both flight altitude and the number of GCPs had significant influences on RMSEZ; as the number of GCPs increased, the accuracy improved. Regarding flight altitude, vertical accuracy decreased as flight altitude increased. The most accurate combination of flight altitude and number of GCPs was 50 m and 10 GCPs, respectively, which yielded RMSEX, RMSEY, RMSEXY, and RMSEZ values equal to 0.038, 0.035, 0.053, and 0.049 m, respectively. In view of these results, the map scale according to the legacy American Society for Photogrammetry and Remote Sensing map standard of 1990 will be approximately 1:150, and an equivalent contour interval of 0.150 m is sufficient for most civil engineering projects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Distinctive Image Features from Scale-Invariant Keypoints
Lowe, D. G. (2004) · International Journal of Computer Vision · doi:10.1023/b:visi.0000029664.99615.94 · Cited by 55,589
Multiple View Geometry in Computer Vision
Hartley, R., & Zisserman, A. (2004) · doi:10.1017/cbo9780511811685 · Cited by 21,070
Cited by
Review of the Current State of UAV Regulations
Stöcker, C., Bennett, R., Nex, F., Gerke, M., & Zevenbergen, J. (2017) · Remote Sensing · doi:10.3390/rs9050459 · Cited by 596
Agüera-Vega, F., Carvajal-Ramírez, F., & Martínez-Carricondo, P. (2017) · Measurement · doi:10.1016/j.measurement.2016.12.002 · Cited by 313
Self-citationAssessment of UAV-photogrammetric mapping accuracy based on variation of ground control points
Martínez-Carricondo, P., Agüera-Vega, F., Carvajal-Ramírez, F., Mesas-Carrascosa, F.-J., García-Ferrer, A., & Pérez-Porras, F.-J. (2018) · International Journal of Applied Earth Observation and Geoinformation · doi:10.1016/j.jag.2018.05.015 · Cited by 313
Self-citationApplications of UAVs in Civil Infrastructure
Greenwood, W. W., Lynch, J. P., & Zekkos, D. (2019) · Journal of Infrastructure Systems · doi:10.1061/(asce)is.1943-555x.0000464 · Cited by 266
Kattenborn, T., Lopatin, J., Förster, M., Braun, A. C., & Fassnacht, F. E. (2019) · Remote Sensing of Environment · doi:10.1016/j.rse.2019.03.025 · Cited by 258
Metadata
- Authors
- Agüera-Vega, F., Carvajal-Ramírez, F., & Martínez-Carricondo, P.
- Venue
- Journal of Surveying Engineering
- Published
- 2017-05
- Volume
- 143
- Issue
- 2
- ISSN
- 0733-9453 (ISSN-L)
- 1943-5428
- OpenAlex
- W2492593655
- Cited by
- 174
- References
- 2
- FWCI
- 25.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Accuracy of Digital Surface Models and Orthophotos Derived from Unmanned Aerial Vehicle Photogrammetry. https://app.cochat.ai/papers/10.1061/(asce)su.1943-5428.0000206
- The paper
- Agüera-Vega, F., Carvajal-Ramírez, F., & Martínez-Carricondo, P. (2017). Accuracy of Digital Surface Models and Orthophotos Derived from Unmanned Aerial Vehicle Photogrammetry. Journal of Surveying Engineering. https://doi.org/10.1061/(asce)su.1943-5428.0000206
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.