The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Thermodynamic Properties of Air and Mixtures of Nitrogen, Argon, and Oxygen From 60 to 2000 K at Pressures to 2000 MPa
Abstract
A thermodynamic property formulation for standard dry air based upon available experimental p–ρ–T, heat capacity, speed of sound, and vapor–liquid equilibrium data is presented. This formulation is valid for liquid, vapor, and supercritical air at temperatures from the solidification point on the bubble-point curve (59.75 K) to 2000 K at pressures up to 2000 MPa. In the absence of reliable experimental data for air above 873 K and 70 MPa, air properties were predicted from nitrogen data in this region. These values were included in the determination of the formulation to extend the range of validity. Experimental shock tube measurements on air give an indication of the extrapolation behavior of the equation of state up to temperatures and pressures of 5000 K and 28 GPa. The available measurements of thermodynamic properties of air are summarized and analyzed. Separate ancillary equations for the calculation of dew and bubble-point pressures and densities of air are presented. In the range from the solidification point to 873 K at pressures to 70 MPa, the estimated uncertainty of density values calculated with the equation of state is 0.1%. The estimated uncertainty of calculated speed of sound values is 0.2% and that for calculated heat capacities is 1%. At temperatures above 873 K and 70 MPa, the estimated uncertainty of calculated density values is 0.5% increasing to 1.0% at 2000 K and 2000 MPa. In addition to the equation of state for standard air, a mixture model explicit in Helmholtz energy has been developed which is capable of calculating the thermodynamic properties of mixtures containing nitrogen, argon, and oxygen. This model is valid for temperatures from the solidification point on the bubble-point curve to 1000 K at pressures up to 100 MPa over all compositions. The Helmholtz energy of the mixture is the sum of the ideal gas contribution, the real gas contribution, and the contribution from mixing. The contribution from mixing is given by a single generalized equation which is applied to all mixtures used in this work. The independent variables are the reduced density and reduced temperature. The model may be used to calculate the thermodynamic properties of mixtures at various compositions including dew and bubble-point properties and critical points. It incorporates the most accurate published equation of state for each pure fluid. The mixture model may be used to calculate the properties of mixtures generally within the experimental accuracies of the available measured properties. The estimated uncertainty of calculated properties is 0.1% in density, 0.2% in the speed of sound, and 1% in heat capacities. Calculated dew and bubble-point pressures are generally accurate to within 1%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to chemical engineering thermodynamics
Smith, J. M. (1950) · Journal of Chemical Education · doi:10.1021/ed027p584.3 · Cited by 4,973
Span, R., Lemmon, E. W., Jacobsen, R. T., Wagner, W., & Yokozeki, A. (2000) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.1349047 · Cited by 861
Self-citationMultiparameter Equations of State
Span, R. (2000) · Springer eBooks · doi:10.1007/978-3-662-04092-8 · Cited by 204
Cited by
Kunz, O., & Wagner, W. (2012) · Journal of Chemical & Engineering Data · doi:10.1021/je300655b · Cited by 1,341
The NIST REFPROP Database for Highly Accurate Properties of Industrially Important Fluids
Huber, M. L., Lemmon, E. W., Bell, I. H., & McLinden, M. O. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01427 · Cited by 398
Self-citationPerformance evaluation of various cryogenic energy storage systems
Abdo, R. F., Pedro, H. T. C., Koury, R. N. N., Machado, L., Coimbra, C. F. M., & Porto, M. P. (2015) · Energy · doi:10.1016/j.energy.2015.08.008 · Cited by 87
Theoretical Model of Dynamic Bulk Modulus for Aerated Hydraulic Fluid
Yuan, X., Wang, W., Zhu, X., & Zhang, L. (2022) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-022-00794-1 · Cited by 40
Smith, J. P., Dykema, J. A., & Keith, D. W. (2018) · Earth and Space Science · doi:10.1002/2018ea000370 · Cited by 37
Metadata
- Authors
- Lemmon, E. W., Jacobsen, R. T., Penoncello, S. G., & Friend, D. G.
- Venue
- Journal of Physical and Chemical Reference Data
- Publisher
- AIP Publishing
- Published
- 2000-05-01
- Volume
- 29
- Issue
- 3
- Pages
- 331-385
- ISSN
- 0047-2689 (ISSN-L)
- 1529-7845
- OpenAlex
- W2151924475
- Cited by
- 592
- References
- 3
- FWCI
- 7.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermodynamic Properties of Air and Mixtures of Nitrogen, Argon, and Oxygen From 60 to 2000 K at Pressures to 2000 MPa. https://app.cochat.ai/papers/10.1063/1.1285884
- The paper
- Lemmon, E. W., Jacobsen, R. T., Penoncello, S. G., & Friend, D. G. (2000). Thermodynamic Properties of Air and Mixtures of Nitrogen, Argon, and Oxygen From 60 to 2000 K at Pressures to 2000 MPa. Journal of Physical and Chemical Reference Data. https://doi.org/10.1063/1.1285884
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.