Laser ablation of solid substrates in water and ambient air
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
Laser ablation of solid substrates in ambient air and under water is investigated. It is found that the laser ablation rate is highly enhanced by the water film. A wide-band microphone is used to detect the audible acoustic wave generated during laser ablation. Peak-to-peak amplitude of the acoustic wave recorded in water confinement regime (WCR) is greater than that recorded in ambient. It is assumed that the plasma generated in WCR induces a much stronger pressure. This high-pressure, high-temperature plasma results in a much higher ablation rate. Theoretical calculation is also carried out to verify this assumption. By proper calibration, acoustic wave detection can be used as a real-time monitoring of the laser ablation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“By recirculating the liquid flow, the concentration of NP colloid can be increased until the desired value.”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [168]
Citations
Cites
Laser Processing and Chemistry
Bäuerle, D. (1996) · Springer eBooks · doi:10.1007/978-3-662-03253-4 · Cited by 2,196
Physical study of laser-produced plasma in confined geometry
Fabbro, R., Fournier, J., Ballard, P., Devaux, D., & Virmont, J. (1990) · Journal of Applied Physics · doi:10.1063/1.346783 · Cited by 1,524
The Bohm criterion and sheath formation
Riemann, K. U. (1991) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/24/4/001 · Cited by 1,046
Shock waves from a water-confined laser-generated plasma
Berthe, L., Fabbro, R., Peyre, P., Tollier, L., & Bartnicki, E. (1997) · Journal of Applied Physics · doi:10.1063/1.366113 · Cited by 533
Generation of shock waves by laser-induced plasma in confined geometry
Devaux, D., Fabbro, R., Tollier, L., & Bartnicki, E. (1993) · Journal of Applied Physics · doi:10.1063/1.354710 · Cited by 250
A study of thermal and mechanical effects on materials induced by pulsed laser drilling
Luft, A., Franz, U., Emsermann, L., & Kaspar, J. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567635 · Cited by 179
Laser ablation at solid–liquid interfaces: An approach from optical emission spectra
Sakka, T., Iwanaga, S., Ogata, Y. H., Matsunawa, A., & Takemoto, T. (2000) · The Journal of Chemical Physics · doi:10.1063/1.481465 · Cited by 178
Isselin, J.-C., Alloncle, A., & Autric, M. L. (1998) · Journal of Applied Physics · doi:10.1063/1.368841 · Cited by 151
Laser-induced plasma formation during pulsed laser deposition
Aden, M., Kreutz, E. W., & Voss, A. (1993) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/26/10/002 · Cited by 70
Laser marking of thin organic films
Bartholomeusz, B. J., & Gupta, M. C. (1992) · Applied Optics · doi:10.1364/ao.31.004829 · Cited by 43
Cited by
Items 101–195 of 195
High‐Quality Femtosecond Laser Surface Micro/Nano‐Structuring Assisted by A Thin Frost Layer
Gao, W., Zheng, K., Liao, Y., Du, H., Liu, C., Ye, C., Liu, K., Xie, S., Chen, C., Chen, J., et al. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202201924 · Cited by 15
Dowding, C., & Lawrence, J. (2010) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1869 · Cited by 15
Du, Z. R., Palina, N., Chen, J., Aberle, A. G., Hoex, B., & Hong, M. (2012) · Optics Express · doi:10.1364/oe.20.00a984 · Cited by 15
Self-citationStudy on ablation threshold of fused silica by liquid-assisted femtosecond laser processing
Sun, X., Yu, J., Hu, Y., Cui, D., Chen, G., Chu, D., & Duan, J. (2019) · Applied Optics · doi:10.1364/ao.58.009027 · Cited by 15
Laser-induced backside wet cleaning technique for glass substrates
Weng, T.-S., & Tsai, C.-H. (2013) · Applied Physics A · doi:10.1007/s00339-013-8182-5 · Cited by 15
Kim, B., Iida, R., Doan, H. D., & Fushinobu, K. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.06.009 · Cited by 15
Mozaffari, H., & Mahdieh, M. H. (2020) · Optics & Laser Technology · doi:10.1016/j.optlastec.2020.106083 · Cited by 14
Park, C., & Park, D.-J. (2021) · Biosensors · doi:10.3390/bios11050150 · Cited by 14
“According to previous research of LP–PLA [30,31], the initial stage of the interaction between the pulsed laser beam and the target surface generates a hot-plasma plume over the laser spot on the ceramic target (Figure 3 ).”
MethodButkus, S., Gaižauskas, E., Mačernytė, L., Jukna, V., Paipulas, D., & Sirutkaitis, V. (2019) · Applied Sciences · doi:10.3390/app9122405 · Cited by 14
“Explanations for these improvements include better cleaning of the micromachined crater due to a lower pressure zone that appears above the micromachined channel as the material expands after the laser pulse hits the surface [34], poor adhesion of the ablated particles to the surface and the walls of the crater which…”
BackgroundLabusch, M., Cunha, A. P. A., Wirtz, S. F., Reichenberger, S., Cleve, E., Söffker, D., & Barcikowski, S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.02.080 · Cited by 13
Cutroneo, M., Havránek, V., Torrisi, L., Silipigni, L., Kováčik, Ľ., Malinský, P., Slepička, P., Fajstavr, D., Janoušková, O., Zbořilová, D., et al. (2022) · Vacuum · doi:10.1016/j.vacuum.2022.110951 · Cited by 13
Shrestha, R. G., Ando, T., Sakamoto, Y., & Kawakita, J. (2019) · Sensors · doi:10.3390/s19204500 · Cited by 13
“Similarly, others require extra power supply for the operating components in order to detect output response [11,12].”
BackgroundUltrasonic characterization of dry and wet nanosecond laser ablation of solids
Kudryashov, S. I., Samokhvalov, A. A., Игоревич, А. Э., Petrov, A. A., & Veiko, V. P. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.104 · Cited by 12
Surface and morphological features of laser-irradiated silicon under vacuum, nitrogen and ethanol
Hayat, A., Bashir, S., Akram, M., Mahmood, K., & Iqbal, M. H. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.10.008 · Cited by 12
Dowding, C., & Lawrence, J. (2009) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1479 · Cited by 14
Liu, Q. X., Wang, C. X., & Yang, G. (2004) · The European Physical Journal B · doi:10.1140/epjb/e2004-00341-4 · Cited by 12
Wang, J., Wang, B., Yuan, C., Yu, A., Zhang, W., & Sheng, L. (2023) · Micromachines · doi:10.3390/mi14030641 · Cited by 12
“[12] found that laser ablation of solid media in water can significantly increase the ablation rate.”
BackgroundMethodMahdieh, M. H., & Jafarabadi, M. A. (2013) · Applied Physics A · doi:10.1007/s00339-013-8212-3 · Cited by 11
Detection of trace substances adhered to a metal surface by laser-induced breakdown spectroscopy
Kawaguchi, Y., Ohmura, H., & Sato, T. (2017) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c7ja00006e · Cited by 11
Femtosecond laser ablation of thin silver films in air and water under tight focusing
Данилов, П. А., Ионин, А. А., Kudryashov, S. I., Rudenko, A. A., Smirnov, N., Porfirev, A. P., Kuchmizhak, A. A., Vitrik, O. B., Kovalev, M. S., & Krasin, G. K. (2020) · Optical Materials Express · doi:10.1364/ome.406054 · Cited by 11
Dowding, C., & Lawrence, J. (2009) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2009.06.009 · Cited by 11
Al‐Mamun, S. A., & Ishigaki, T. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12856 · Cited by 14
Mozaffari, H., & Mahdieh, M. H. (2019) · Physics Letters A · doi:10.1016/j.physleta.2019.01.005 · Cited by 11
Top‐Down Synthesis of Hollow Graphene Nanostructures for Use in Resistive Switching Memory Devices
Anoop, G., Kim, T. Y., Lee, H. J., Panwar, V., Kwak, J. H., Heo, Y., Yang, J., Lee, J. H., & Jo, J. Y. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700264 · Cited by 10
Bump formation on a glass surface with a transparent coating using femtosecond laser processing
Kawamura, D., Takita, A., Hayasaki, Y., & Nishida, N. (2006) · Applied Physics A · doi:10.1007/s00339-006-3648-3 · Cited by 10
Rubbi, F., Zhang, X., Delzendehrooy, F., Mao, B., Nian, Q., Doumanidis, C. C., & Liao, Y. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.11.017 · Cited by 9
Bashir, S., Rafique, M. S., Nathala, C. S. R., ajami, A., & Husinsky, W. (2015) · Radiation effects and defects in solids · doi:10.1080/10420150.2015.1023202 · Cited by 9
Dowding, C., & Lawrence, J. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.01.009 · Cited by 9
“This is a result that agrees with the previous work of others [22-27], who collectively determined that the increased etching efficiency with respect to laser fluence is due to the action of plume etching.”
BackgroundResultInfluentialNanomaterials: Laser‐Based Processing in Liquid Media
Singh, S. C., Zeng, H., Yang, S., Cai, W., Hong, M., Chen, G., & Chong, T. C. (2012) · Wiley eBooks · doi:10.1002/9783527646821.ch6 · Cited by 11
Self-citationModeling of nanosecond pulsed laser processing of polymers in air and water
Marla, D., Zhang, Y., Hattel, J. H., & Spangenberg, J. (2018) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/1361-651x/aabea0 · Cited by 9
Magnetic field enhanced laser drilling of SiC substrates inside chemical solutions
Qi, Y., Yin, J., & Hong, M. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.06.084 · Cited by 8
Self-citationMekawy, M. M., Terada, E., Inoue, S., Sakamoto, Y., & Kawakita, J. (2021) · ACS Omega · doi:10.1021/acsomega.1c05161 · Cited by 7
Jafarabadi, M. A., & Mahdieh, M. H. (2013) · International Journal of Optics and Photonics · Cited by 7
Laser dicing of silicon and electronics substrates
Heng, H., Wang, X. C., & Wang, Z. K. (2010) · Elsevier eBooks · doi:10.1533/9781845699819.2.108 · Cited by 7
Marla, D., Zhang, Y., Jabbari, M., Sonne, M. R., Spangenberg, J., & Hattel, J. H. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.011 · Cited by 7
Impact of Liquid Medium on Laser Ablation Mechanism: Surface Heating and Cooling
Soliman, W., El-Ansary, S., & Badr, Y. A. (2018) · Lasers in Manufacturing and Materials Processing · doi:10.1007/s40516-018-0073-3 · Cited by 7
Ablation debris control by means of closed thick film filtered water immersion
Dowding, C., & Lawrence, J. (2009) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1711 · Cited by 7
Chen, Z., Shek, C. H., & Wu, C. L. (2015) · Nanoscale · doi:10.1039/c5nr04255k · Cited by 6
RetractedChaoyue, 燕. Y., Shengzhi, 孙. S., Xiaofeng, 刘. L., & Jianrong, 邱. Q. (2023) · Laser & Optoelectronics Progress · doi:10.3788/lop223126 · Cited by 7
Afshar, M., Walia, J., Berini, P., Variola, F., & Bhardwaj, V. R. (2025) · Applied Surface Science · doi:10.1016/j.apsusc.2025.163258 · Cited by 6
Laser Ablation on Isostatic Graphite—A New Way to Create Exfoliated Graphite
Sierra-Trillo, M. I., Thomann, R., Krossing, I., Hanselmann, R., Mülhaupt, R., & Thomann, Y. (2022) · Materials · doi:10.3390/ma15165474 · Cited by 6
“It was reported that a laser beam on a silicon surface covered with a water film can induce a “water hammer” or liquid jet with a pressure of up to sever l hundred MPa [26].”
BackgroundInfluentialPREPARATION OF TIN OXIDE NANOPARTICLES BY LASER ABLATION IN SOLUTION
Li, M., Lu, Q., & Wang, Z. (2006) · International Journal of Nanoscience · doi:10.1142/s0219581x06004334 · Cited by 7
Influence of water environment on holmium laser ablation performance for hard tissues
Lü, T., Xiao, Q., & Li, Z. (2012) · Applied Optics · doi:10.1364/ao.51.002505 · Cited by 6
Darwish, S. M., Ahmed, N., & Al-Ahmari, A. M. (2016) · Advanced structured materials · doi:10.1007/978-981-10-1082-8_17 · Cited by 6
Shabanlou, E., Jaleh, B., Imantalab, O., & Fattah‐alhosseini, A. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.06.004 · Cited by 5
New aspects of femtosecond laser ablation of Si in water: a material perspective
Kumar, K. R., Banerjee, D., Akkanaboina, M., Goud, R. S. P., Anjum, A., Prakash, A. P. G., Pathak, A. P., Rao, S. V., & Rao, S. V. S. N. (2024) · Journal of Physics Condensed Matter · doi:10.1088/1361-648x/ad2f55 · Cited by 5
Ringkai, H., Tamrin, K. F., Sing, N. N., Yassin, A., Husaini, A., & Musel, J. (2025) · Scientific Reports · doi:10.1038/s41598-025-11455-3 · Cited by 4
Qi, Y., & Hong, M. (2025) · Journal of Applied Physics · doi:10.1063/5.0292808 · Cited by 4
Self-citationvan der Linden, S., Hagmeijer, R., & Römer, G. R. B. E. (2023) · Applied Physics A · doi:10.1007/s00339-023-07050-w · Cited by 5
“Reasons for ablating under a liquid layer include: craters shot under water are reported to be deeper than their in air ablated counter parts [14], contain less redeposited material and are therefore “cleaner” [15, 16].”
BackgroundResultShrestha, R. G., Satoh, N., & Kawakita, J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abcc33 · Cited by 4
Akkanaboina, M., Banerjee, D., Kumar, K. R., Goud, R. S. P., Rao, S. V., & Rao, S. V. S. N. (2022) · Journal of Laser Applications · doi:10.2351/7.0000750 · Cited by 3
Laser Micromachining of Silicon Substrates
Saetang, V., & Wang, J. (2009) · Advanced materials research · doi:10.4028/www.scientific.net/amr.76-78.416 · Cited by 3
Simulation on Drilling with Water-Jet Guided Laser
Li, C. Q., Yan, L. J., & Wang, Y. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.151.7 · Cited by 3
“With the increase of temperature and elimination of material, vaporization and melt ejection take place on the radiation frond and heat-induced explosion is generated within the water jet near the erosion zone, the pressure of shock wave caused by heat-induced explosion is almost no quantitative in the previous litera…”
BackgroundDowding, C., & Lawrence, J. (2008) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5061313 · Cited by 3
Yufeng, 张. Z., Xiaohua, 朱. Z., Yang, 廖. L., Jijun, 冯. F., Wenhai, 高. G., Shaoming, 谢. X., Cong, 陈. C., Ke, 刘. L., Yujie, 彭. P., & Yuxin, 冷. L. (2025) · Chinese Journal of Lasers · doi:10.3788/cjl240806 · Cited by 2
Femtosecond Laser Refractive Surgery: Reshaping the Cornea With Technical Advances
Wang, Z., Zhang, X., Zhong, L., & Qiu, J. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202501307 · Cited by 2
Optical brake induced by laser shock waves
Kang, Q., Shen, D., Sun, J. L., Luo, X., Liu, W., Zhou, Z., Zhang, Y., & Wan, W. (2020) · Journal of Nonlinear Optical Physics & Materials · doi:10.1142/s0218863520500101 · Cited by 2
Yu, H., Liu, X., Gong, C., Sun, W., Liu, X., & liu, Y. (2024) · Optics & Laser Technology · doi:10.1016/j.optlastec.2024.110947 · Cited by 2
The Developments and Retrospect of Water–Laser Machining Technology
Pawar, P. A., Kumar, A., & Ballav, R. (2024) · Wiley eBooks · doi:10.1002/9781394214655.ch11 · Cited by 2
Enhanced coupling of optical energy during liquid-confined metal ablation
Kang, H. W., & Welch, A. J. (2015) · Journal of Applied Physics · doi:10.1063/1.4933345 · Cited by 2
Aneesh, P. M., & Jayaraj, M. K. (2020) · Materials horizons · doi:10.1007/978-981-15-3314-3_3 · Cited by 2
Monsa, Y., Lerner, N., Danon, A., & Bar, I. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c07028 · Cited by 2
Lasagni, A. F. (2011) · Surface Engineering · doi:10.1179/026708411x12995101102163 · Cited by 2
Singh, S. S., Joshi, S. N., & Khare, A. K. (2015) · Topics in mining, metallurgy and materials engineering · doi:10.1007/978-81-322-2352-8_11 · Cited by 2
Minami, K., Lawrence, J., Li, L., Edwards, R. E., & Gale, A. W. (2002) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5066207 · Cited by 2
Dowding, C., & Lawrence, J. (2009) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5061660 · Cited by 2
van der Linden, S., Hagmeijer, R., & Römer, G. R. B. E. (2023) · Applied Physics A · doi:10.1007/s00339-023-06843-3 · Cited by 1
Characterization of laser-induced shock waves in aluminum under a confined liquid medium
Raza, A., Rehman, Z. U., Murtaza, G., Iqbal, M., Qayyum, H., Irfan, M., Nasir, A., Ullah, S., Qayyum, A., & Mahmood, S. (2026) · Applied Optics · doi:10.1364/ao.580336 · Cited by 1
Campos-Cortez, E., Pérez-Gutiérrez, F. G., Oviedo-Tolentino, F., Padilla-Martínez, J. P., Romero‐Méndez, R., & Aguilar, G. (2012) · International Journal of Thermophysics · doi:10.1007/s10765-012-1302-1 · Cited by 1
Vibration Analysis of Different Micro-Beams with Laser Ablation
Xiong, L. C., Zhou, Q. S., & Chen, P. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.462-463.428 · Cited by 1
Smirnov, N., Kudryashov, S. I., Данилов, П. А., Nastulyavichus, A., Rudenko, A. A., & Ионин, А. А. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.03.100 · Cited by 1
Surface modification of silicon carbide
Yan, J., & Takayama, N. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816709-0.00009-4 · Cited by 1
Gentili, D., & Cavallini, M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816865-3.00003-2 · Cited by 1
Feasibility study on a short-pulsed IR wavelength for effective calculus fragmentation
Kang, H. W. (2015) · Journal of the Korean Physical Society · doi:10.3938/jkps.66.1623 · Cited by 1
Dowding, C., & Lawrence, J. (2010) · Lincoln Repository (University of Lincoln) · Cited by 1
Laser Surface Texturing of Multicrystalline Silicon to Reduce Solar Weighted Reflectance
Aghayan, M. (2015) · Spectrum Research Repository (Concordia University) · Cited by 1
Dowding, C., & Lawrence, J. (2010) · Lincoln Repository (University of Lincoln)
Monitoring of excimer laser ablation of multi-layer thin films by acoustic emissions
Liu, G., Toncich, D., Harvey, E. C., & Ng, C. K. (2002) · Swinburne figshare (Swinburne University of Technology)
Lü, T., & Xiao, Q. (2012) · Applied Physics B · doi:10.1007/s00340-012-5139-x
Laser Trepan Drilling of Silicon in Air and under Water
Wee, L. M., & Zheng, H. Y. (2008) · IEEE PhotonicsGlobal · doi:10.1109/ipgc.2008.4781515
“They reported that laser ablation rate is highly enhanced by the water film due to plasma generated in the water confinement region [6].”
BackgroundKURODA, T., Watanabe, T., & Matsusaka, S. (2005) · The Review of Laser Engineering · doi:10.2184/lsj.33.469
Study of femtosecond laser pulse drilling of silicon
Jiao, L. (2014) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/62050
Silicon nanoparticles with zincblende structure
Liu, P., Xiao, J., & Yang, G. (2017) · CRC Press eBooks · doi:10.4324/9781315153544-13
Micromachining of microstructures on sapphire
Yan, J., & Takayama, N. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816709-0.00006-9
정형균 (2020) · Seoul National University Open Repository (Seoul National University)
Characteristics of Laser-Induced Plasma Shock Wave in Metal Materials
Zhou, L., & He, W. (2021) · Springer series in materials science · doi:10.1007/978-981-16-1747-8_2
Nanotechnology and the Most Important Characterization Techniques for Nanomaterial's: A Review
Ulwali, R. A., Abbas, H. K., A., N. Y., & Alwally, H. A. (2021) · NeuroQuantology · doi:10.14704/nq.2021.19.8.nq21111
Silicon nanoparticles with zincblende structure
Liu, P., Xiao, J., & Yang, G. (2017) · Series in materials science and engineering · doi:10.1201/9781315153544-14
(2008) · Elsevier eBooks · doi:10.1016/b978-008044498-7.50010-8
Mise en place d’un microscope confocal achromatique
Mancini, C. (2010) · theses.fr (ABES) · doi:10.70675/27da071cz0789z4f2bz8f3ezb8d079369764
Synthèse de nanoparticules par ablation laser en liquide et étude de leurs propriétés optiques
Diouf, M. (2012) · theses.fr (ABES) · doi:10.70675/fb7b2c24ze585z4cbczb9c7z41b878da00ee · Cited by 2
Global dynamic laser-drilling model for multi-pulse femtosecond laser deep penetration
Liu, J., Longxiang, Q., Hong, L., Liu, L., & Li, Z. (2026) · Optics & Laser Technology · doi:10.1016/j.optlastec.2026.115978
Features of Femtosecond Laser Ablation of Porous Silicon Layers in an Aqueous Medium
Mavreshko, E. I., Fronya, A. A., Tikhonowski, G. V., Grigoryeva, M. S., & Zavestovskaya, I. N. (2026) · Bulletin of the Lebedev Physics Institute · doi:10.3103/s1068335626600476
Ahmed, N., & Alshammary, W. (2026) · Machines · doi:10.3390/machines14101156
Laser-produced aluminum-air plasma dynamics and chemistry: ReactingFoam modeling
Semaha, E. T., & Miloshevsky, G. V. (2026) · Journal of Laser Applications · doi:10.2351/7.0002090
Metadata
- Authors
- Zhu, S., Lu, Y. F., Hong, M. H., & Chen, X. Y.
- Affiliations
- Data Storage Institute (SG)
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2001-02-15
- Volume
- 89
- Issue
- 4
- Pages
- 2400-2403
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2002002551
- Cited by
- 193
- References
- 15
- Citations by year
- 2026: 4 · 2025: 7 · 2024: 3 · 2023: 9 · 2022: 5 · 2021: 7 · 2020: 12 · 2019: 16 · 2018: 10 · 2017: 6 · 2016: 7 · 2015: 14 · 2014: 4 · 2013: 10 · 2012: 10
- FWCI
- 9.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Physics (publishedVersion)
- National University of Singapore (submittedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Chemistry › Spectroscopy › Laser-induced spectroscopy and plasma
- Keywords
- laser ablation, water film, plasma pressure, acoustic wave detection, real-time monitoring, solid substrates, laser-plasma interaction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.