Laser ablation of solid substrates in water and ambient air
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
Laser ablation of solid substrates in ambient air and under water is investigated. It is found that the laser ablation rate is highly enhanced by the water film. A wide-band microphone is used to detect the audible acoustic wave generated during laser ablation. Peak-to-peak amplitude of the acoustic wave recorded in water confinement regime (WCR) is greater than that recorded in ambient. It is assumed that the plasma generated in WCR induces a much stronger pressure. This high-pressure, high-temperature plasma results in a much higher ablation rate. Theoretical calculation is also carried out to verify this assumption. By proper calibration, acoustic wave detection can be used as a real-time monitoring of the laser ablation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“By recirculating the liquid flow, the concentration of NP colloid can be increased until the desired value.”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [168]
Citations
Cites
Laser Processing and Chemistry
Bäuerle, D. (1996) · Springer eBooks · doi:10.1007/978-3-662-03253-4 · Cited by 2,196
Physical study of laser-produced plasma in confined geometry
Fabbro, R., Fournier, J., Ballard, P., Devaux, D., & Virmont, J. (1990) · Journal of Applied Physics · doi:10.1063/1.346783 · Cited by 1,524
The Bohm criterion and sheath formation
Riemann, K. U. (1991) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/24/4/001 · Cited by 1,046
Shock waves from a water-confined laser-generated plasma
Berthe, L., Fabbro, R., Peyre, P., Tollier, L., & Bartnicki, E. (1997) · Journal of Applied Physics · doi:10.1063/1.366113 · Cited by 533
Generation of shock waves by laser-induced plasma in confined geometry
Devaux, D., Fabbro, R., Tollier, L., & Bartnicki, E. (1993) · Journal of Applied Physics · doi:10.1063/1.354710 · Cited by 250
A study of thermal and mechanical effects on materials induced by pulsed laser drilling
Luft, A., Franz, U., Emsermann, L., & Kaspar, J. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567635 · Cited by 179
Laser ablation at solid–liquid interfaces: An approach from optical emission spectra
Sakka, T., Iwanaga, S., Ogata, Y. H., Matsunawa, A., & Takemoto, T. (2000) · The Journal of Chemical Physics · doi:10.1063/1.481465 · Cited by 178
Isselin, J.-C., Alloncle, A., & Autric, M. L. (1998) · Journal of Applied Physics · doi:10.1063/1.368841 · Cited by 151
Laser-induced plasma formation during pulsed laser deposition
Aden, M., Kreutz, E. W., & Voss, A. (1993) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/26/10/002 · Cited by 70
Laser marking of thin organic films
Bartholomeusz, B. J., & Gupta, M. C. (1992) · Applied Optics · doi:10.1364/ao.31.004829 · Cited by 43
Cited by
Laser ablation in liquids: Applications in the synthesis of nanocrystals
Yang, G. W. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.10.016 · Cited by 1,055
Zeng, H., Cai, W., Li, Y., Hu, J., & Liu, P. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp052258n · Cited by 384
Underwater and water-assisted laser processing: Part 2—Etching, cutting and rarely used methods
Kruusing, A. (2004) · Optics and Lasers in Engineering · doi:10.1016/s0143-8166(02)00143-4 · Cited by 237
Preparation of nano-size particles of silver with femtosecond laser ablation in water
Tsuji, T., Kakita, T., & Tsuji, M. (2003) · Applied Surface Science · doi:10.1016/s0169-4332(02)01230-8 · Cited by 224
Laser precision engineering: from microfabrication to nanoprocessing
Chong, T. C., Hong, M. H., & Shi, L. P. (2010) · Laser & Photonics Reviews · doi:10.1002/lpor.200810057 · Cited by 224
Self-citationKanitz, A., Kalus, M.-R., Gurevich, E. L., Ostendorf, A., Barcikowski, S., & Amans, D. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab3dbe · Cited by 195
Recent Advances in Tin Dioxide Materials: Some Developments in Thin Films, Nanowires, and Nanorods
Chen, Z., Pan, D., Li, Z., Jiao, Z., Wu, M., Shek, C.-H., Wu, C. M. L., & Lai, J. K. L. (2014) · Chemical Reviews · doi:10.1021/cr4007335 · Cited by 175
Žemaitis, A., Gaidys, M., Brikas, M., Gečys, P., Račiukaitis, G., & Gedvilas, M. (2018) · Scientific Reports · doi:10.1038/s41598-018-35604-z · Cited by 166
Femtosecond laser interaction with silicon under water confinement
Daminelli, G., Krüger, J., & Kautek, W. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2004.04.043 · Cited by 164
Laser Ablation and Laser-Hybrid Ablation Processes: A Review
Ahmed, N., Darwish, S. M., & Al-Ahmari, A. M. (2015) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1048359 · Cited by 155
Liang, C., Shimizu, Y., Sasaki, T., & Koshizaki, N. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp0347466 · Cited by 133
Khairani, I. Y., Mínguez-Vega, G., Doñate-Buendía, C., & Gökce, B. (2023) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp01214j · Cited by 130
Laser ablation of solid substrates in a water-confined environment
Zhu, S., Lu, Y. F., & Hong, M. H. (2001) · Applied Physics Letters · doi:10.1063/1.1400086 · Cited by 126
Self-citationNanodiamond synthesis by pulsed laser ablation in liquids
Amans, D., Chenus, A.-C., Ledoux, G., Dujardin, C., Reynaud, C., Sublemontier, O., Masenelli‐Varlot, K., & Guillois, O. (2008) · Diamond and Related Materials · doi:10.1016/j.diamond.2008.10.035 · Cited by 126
Tsuji, T., Tsuboi, Y., Kitamura, N., & Tsuji, M. (2004) · Applied Surface Science · doi:10.1016/j.apsusc.2004.02.013 · Cited by 127
Underwater-laser drilling of aluminum
Krstulović, N., Shannon, S., Stefanuik, R., & Fanara, C. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5141-4 · Cited by 114
Periodical structures induced by femtosecond laser on metals in air and liquid environments
Albu, C., Dinescu, A. M., Filipescu, M., Ulmeanu, M., & Zamfirescu, M. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.11.075 · Cited by 106
Tribological performance of laser peened Ti–6Al–4V
Kumar, D., Akhtar, S. N., Patel, A. K., Ramkumar, J., & Balani, K. (2014) · Wear · doi:10.1016/j.wear.2014.11.016 · Cited by 107
Micromachining of silicon by short-pulse laser ablation in air and under water
Choo, K. L., Ogawa, Y., Kanbargi, G., Otra, V., Raff, L. M., & Komanduri, R. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2003.12.021 · Cited by 98
Status and demand of research to bring laser generation of nanoparticles in liquids to maturity
Amans, D., Cai, W., & Barcikowski, S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.05.117 · Cited by 91
Laser ablation of silicon in water with nanosecond and femtosecond pulses
Ren, J., Kelly, M. A., & Hesselink, L. (2005) · Optics Letters · doi:10.1364/ol.30.001740 · Cited by 95
Influence of liquid environments on femtosecond laser ablation of silicon
Liu, H., Chen, F., Wang, X., Yang, Q., Bian, H., Si, J., & Hou, X. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2010.04.043 · Cited by 104
An investigation of hybrid laser–waterjet ablation of silicon substrates
Tangwarodomnukun, V., Wang, J., Huang, C., & Zhu, H. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.01.002 · Cited by 91
Liang, C., Sasaki, T., Shimizu, Y., & Koshizaki, N. (2004) · Chemical Physics Letters · doi:10.1016/j.cplett.2004.03.056 · Cited by 91
Spectral profile of atomic emission lines and effects of pulse duration on laser ablation in liquid
Sakka, T., Masai, S., Fukami, K., & Ogata, Y. H. (2009) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2009.07.018 · Cited by 88
“The irradiation by 19-ns pulse gives the volume removal significantly larger in water than in air, as has been observed in previous studies [8,15], while for the longer pulses the volume removal in water is rather smaller than in air.”
BackgroundCoaxial waterjet-assisted laser drilling of film cooling holes in turbine blades
Liu, Y. Z. (2019) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2019.103510 · Cited by 88
Micro-machining of silicon wafer in air and under water
Wee, L. M., Ng, E. Y. K., Prathama, A. H., & Zheng, H. Y. (2010) · Optics & Laser Technology · doi:10.1016/j.optlastec.2010.05.005 · Cited by 91
Cubic-BN nanocrystals synthesis by pulsed laser induced liquid–solid interfacial reaction
Wang, J. B., Yang, G., Zhang, C. Y., Zhong, X. L., & Ren, Z. A. (2003) · Chemical Physics Letters · doi:10.1016/s0009-2614(02)01656-1 · Cited by 85
Saito, K., Takatani, K., Sakka, T., & Ogata, Y. H. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00303-3 · Cited by 82
Facile and rapid synthesis of highly luminescent nanoparticles via pulsed laser ablation in liquid
Ledoux, G., Amans, D., Dujardin, C., & Masenelli-Varlot, K. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/44/445605 · Cited by 76
“In the literature, direct measurements of the shockwave properties generated on a silicon substrate in water [14] and on an aluminum foil in water (5 GPa) [15] have been reported.”
BackgroundLaser ablation in a liquid-confined environment using a nanosecond laser pulse
Kang, H. W., Lee, H., & Welch, A. J. (2008) · Journal of Applied Physics · doi:10.1063/1.2905314 · Cited by 76
Saito, K., Sakka, T., & Ogata, Y. H. (2003) · Journal of Applied Physics · doi:10.1063/1.1614431 · Cited by 72
Effect of liquid thickness on laser ablation efficiency
Kang, H. W., & Welch, A. J. (2007) · Journal of Applied Physics · doi:10.1063/1.2715746 · Cited by 68
Cell patterning via laser micro/nano structured silicon surfaces
Yiannakou, C., Simitzi, C., Manousaki, A., Fotakis, C., Ranella, A., & Stratakis, E. I. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c6 · Cited by 73
Modeling of nanosecond laser ablation with vapor plasma formation
Wu, B., & Shin, Y. C. (2006) · Journal of Applied Physics · doi:10.1063/1.2190718 · Cited by 66
Effect of dry and wet ambient environment on the pulsed laser ablation of titanium
Ali, N., Bashir, S., Umm-i-Kalsoom, Akram, M., & Mahmood, K. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2012.12.049 · Cited by 66
Study on process and mechanism of laser drilling in water and air
Lv, J. H., Dong, X., Wang, K., Duan, W., Fan, Z., & Mei, X. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-8279-4 · Cited by 67
Insight on Fractal Assessment Strategies for Tin Dioxide Thin Films
Chen, Z., Pan, D., Zhao, B., Ding, G., Jiao, Z., Wu, M., Shek, C. H., Wu, C. L., & Lai, J. K. L. (2010) · ACS Nano · doi:10.1021/nn901635f · Cited by 66
“(iii) Subsequent expansion of the high-temperature and high-pressure tin dioxide plasma leading to cooling of the tin dioxide plumes.(26) 29 In our case, the interval between two successive pulses is much longer than the life of the plasma.”
BackgroundLazic, V., Laserna, J. J., & Jovićević, S. (2013) · Spectrochimica Acta Part B Atomic Spectroscopy · doi:10.1016/j.sab.2013.01.012 · Cited by 68
Sakka, T., Takatani, K., Ogata, Y. H., & Mabuchi, M. (2002) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/35/1/312 · Cited by 62
Zeng, H., Liu, P., Cai, W., Cao, X., & Yang, S. (2007) · Crystal Growth & Design · doi:10.1021/cg0607147 · Cited by 57
Investigations on laser hard tissue ablation under various environments
Kang, H. W., Oh, J., & Welch, A. J. (2008) · Physics in Medicine and Biology · doi:10.1088/0031-9155/53/12/021 · Cited by 52
“In addition, materialprocessing studies showed that lower damage threshold and enhanced ablation performance can be achieved with the application of a transparent water layer (Zhu et al 2001, Kim et al 2004).”
BackgroundEnhancement of Bovine Bone Ablation Assisted by a Transparent Liquid Layer on a Target Surface
Kang, H. W., Lee, H., Chen, S., & Welch, A. J. (2006) · IEEE Journal of Quantum Electronics · doi:10.1109/jqe.2006.875867 · Cited by 52
“It was reported that the laser-induced plasma could be confined in the liquid layer presenting on the target surface, consequently inducing higher pressure amplitude and longer shock wave duration than the dry condition in spite of the partial absorption of the incoming laser pulse by plasma screening [12], [13], [15]…”
BackgroundResultInfluentialNanosecond pulsed laser ablation of silicon in liquids
Karimzadeh, R., Anvari, J. Z., & Mansour, N. (2008) · Applied Physics A · doi:10.1007/s00339-008-4873-8 · Cited by 60
Femtosecond laser ablation of brass in air and liquid media
Shaheen, M. E., Gagnon, J. E., & Fryer, B. J. (2013) · Journal of Applied Physics · doi:10.1063/1.4808455 · Cited by 51
Sakka, T., Saito, K., & Ogata, Y. H. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00373-2 · Cited by 51
A Comparison of Dry and Underwater Laser Micromachining of Silicon Substrates
Saetang, V., Wang, J., & Mathew, P. (2010) · Key engineering materials · doi:10.4028/www.scientific.net/kem.443.693 · Cited by 50
Optimization of femtosecond laser processing in liquids
Hoppius, J. S., Maragkaki, S., Kanitz, A., Gregorčič, P., & Gurevich, E. L. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.121 · Cited by 42
Promoting the yield of nanoparticles from laser ablation in liquid
Jiang, Y., Liu, P., Liang, Y., Li, H. B., & Yang, G. W. (2011) · Applied Physics A · doi:10.1007/s00339-011-6557-z · Cited by 45
Zhang, H., Liu, Y., Li, B., Hua, M., & Dong, G. (2020) · Tribology International · doi:10.1016/j.triboint.2020.106353 · Cited by 44
Al‐Mamun, S. A., Nakajima, R., & Ishigaki, T. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.10.027 · Cited by 44
Radziejewska, J., Strzelec, M., Ostrowski, R., & Sarzyński, A. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.105913 · Cited by 43
Removal mechanism of liquid-assisted nanosecond pulsed laser cleaning TA15 titanium alloy oxide film
Li, Z., Chen, X., Yang, S., Zhang, D., Xu, J., Ma, R., Shan, D., & Guo, B. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.06.165 · Cited by 41
Self-citationLiu, Q. X., Wang, C. X., Zhang, W., & Wang, G. W. (2003) · Chemical Physics Letters · doi:10.1016/j.cplett.2003.10.004 · Cited by 41
Smirnov, N. A., Kudryashov, S. I., Rudenko, A. A., Zayarny, D. A., & Ionin, A. A. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.150243 · Cited by 40
Laser beam micro-machining under water immersion
Al-Ahmari, A. M., Ahmed, N., & Darwish, S. M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7699-5 · Cited by 40
Hu, H., Liu, T., & Zhai, H. (2015) · Optics Express · doi:10.1364/oe.23.000628 · Cited by 46
Laser backside etching of fused silica due to carbon layer ablation
Böhme, R., Zimmer, K., & Rauschenbach, B. (2005) · Applied Physics A · doi:10.1007/s00339-005-3387-x · Cited by 40
Sakka, T., Saito, K., & Ogata, Y. H. (2005) · Journal of Applied Physics · doi:10.1063/1.1828214 · Cited by 40
Lazic, V., Laserna, J. J., & Jovićević, S. (2013) · Spectrochimica Acta Part B Atomic Spectroscopy · doi:10.1016/j.sab.2013.01.009 · Cited by 45
Role of dielectric fluid and concentrator material in microwave drilling of borosilicate glass
Kumar, G., & Sharma, A. K. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.05.010 · Cited by 37
Dawood, M. S., Hamdan, A., & Margot, J. (2015) · AIP Advances · doi:10.1063/1.4935100 · Cited by 36
Dai, F., Wen, D. P., Zhang, Y. K., Lu, J., Ren, X., & Zhou, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.137 · Cited by 36
Liu, Q.-R., Yang, G., & Zhang, J. X. (2003) · Chemical Physics Letters · doi:10.1016/s0009-2614(03)00580-3 · Cited by 35
Baruah, P. K., Sharma, A. K., & Khare, A. K. (2019) · RSC Advances · doi:10.1039/c9ra00197b · Cited by 34
Laser ablated copper plasmas in liquid and gas ambient
Kumar, B., & Thareja, R. K. (2013) · Physics of Plasmas · doi:10.1063/1.4807041 · Cited by 32
An ultrahigh-accuracy Miniature Dew Point Sensor based on an Integrated Photonics Platform
Tao, J., Luo, Y., Wang, L., Cai, H. N., Sun, T., Song, J., Liu, H., & Gu, Y. (2016) · Scientific Reports · doi:10.1038/srep29672 · Cited by 32
Cavitation effect of holmium laser pulse applied to ablation of hard tissue underwater
Lü, T., Xiao, Q., Xia, D., Ruan, K., & Li, Z. (2010) · Journal of Biomedical Optics · doi:10.1117/1.3470092 · Cited by 31
Takayama, N., Asaka, S., & Yan, J. (2018) · Precision Engineering · doi:10.1016/j.precisioneng.2018.02.008 · Cited by 30
“The sound is known to correspond with the amount of particles emitted from the surface into the surrounding atmosphere [22].”
BackgroundMechanism of nanosecond laser drilling process of 4H-SiC for through substrate vias
Kim, B., Iida, R., Doan, D. H., & Fushinobu, K. (2017) · Applied Physics A · doi:10.1007/s00339-017-0986-2 · Cited by 29
Jiao, L. S., Ng, E. Y. K., Wee, L. M., & Zheng, H. Y. (2011) · Applied Physics A · doi:10.1007/s00339-011-6374-4 · Cited by 29
Tripathi, P., Ramkumar, J., & Balani, K. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.124919 · Cited by 27
Švrček, V., Sasaki, T., Katoh, R., Shimizu, Y., & Koshizaki, N. (2008) · Applied Physics B · doi:10.1007/s00340-008-3296-8 · Cited by 26
Silicon Ablation by Single Ultrashort Laser Pulses of Variable Width in Air and Water
Smirnov, N., Kudryashov, S. I., Данилов, П. А., Rudenko, A. A., Ионин, А. А., & Nastulyavichus, A. (2018) · Journal of Experimental and Theoretical Physics Letters · doi:10.1134/s002136401818011x · Cited by 26
Nucleation thermodynamics of cubic boron nitride in pulsed-laser ablation in liquid
Liu, Q. X., Wang, C. X., & Yang, G. (2005) · Physical Review B · doi:10.1103/physrevb.71.155422 · Cited by 25
State of the Art on Under Liquid Laser Beam Machining
Behera, R. R., & Sankar, M. R. (2015) · Materials Today Proceedings · doi:10.1016/j.matpr.2015.07.007 · Cited by 24
Jang, D., Park, J.-G., & Kim, D. (2011) · Journal of Applied Physics · doi:10.1063/1.3558989 · Cited by 24
Localized plasticity in silicon carbide ceramics induced by laser shock processing
Wang, F., Yan, X., Zhang, C., Deng, L., Lu, Y., Nastasi, M., & Cui, B. (2019) · Materialia · doi:10.1016/j.mtla.2019.100265 · Cited by 25
Self-citationMicro-channel fabrication on NiTi shape memory alloy substrate using Nd3+: YAG laser
Shukla, A. K., Jayachandran, S., Bhoyar, J. V., Akash, K., Prabu, S. S. M., Bhirodkar, S., Manikandan, M. S. K., Shiva, S., & Palani, I. A. (2020) · Materials and Manufacturing Processes · doi:10.1080/10426914.2020.1718703 · Cited by 23
“Micro channeling in dimethyl sulfoxide environment shown abrupt effect due to the melt expulsion and bursts due to superheated bubbles, however formation in an underwater environment was smooth and esthetic.([27]) Further, the acoustic wave of laser ablation was recorded using a microphone showed the higher amplitude…”
BackgroundDowding, C. (2010) · Elsevier eBooks · doi:10.1533/9781845699819.7.575 · Cited by 25
Laser Ablation of a Sample In Liquid—LASIL
Douglas, D. N., Crisp, J. L., Reid, H. J., & Sharp, B. L. (2011) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c0ja00144a · Cited by 23
Zhai, C., Tian, Y., Wang, L., Jia, Z., Li, Y., Lu, Y., Guo, J., Ye, W., & Zheng, R. (2023) · Journal of Analytical Atomic Spectrometry · doi:10.1039/d3ja00291h · Cited by 22
Self-citationGrowth of titanium nanoparticles in confined plasma
Kumar, B., & Thareja, R. K. (2012) · Physics of Plasmas · doi:10.1063/1.3697978 · Cited by 22
Effect of beam profile on nanosecond laser drilling of 4H-SIC
Kim, B., Iida, R., Kiyokawa, S., & Fushinobu, K. (2018) · Journal of Laser Applications · doi:10.2351/1.5040597 · Cited by 22
The effect of assist liquid on the hole taper improvement in femtosecond laser percussion drilling
Jiao, L. S., Ng, E. Y. K., Wee, L. M., & Zheng, H. Y. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.06.187 · Cited by 22
Wang, J., Zhong, X. L., Zhang, C. Y., Huang, B., & Yang, G. (2003) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2003.0387 · Cited by 21
Du, Z., Chen, L., Kao, T.-S., Wu, M., & Hong, M. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.122 · Cited by 20
Self-citationCharacterization of Ablated Bone and Muscle for Long-Pulsed Laser Ablation in Dry and Wet Conditions
Kenhagho, H. N., Shevchik, S. A., Saeidi, F., Faivre, N., Meylan, B., Rauter, G., Guzman, R. G., Cattin, P. C., Wasmer, K., & Zam, A. (2019) · Materials · doi:10.3390/ma12081338 · Cited by 19
“It has been argued that a high laser energy density improves the radiation ablation efficiency in wet conditions by confining the laser-generated plasma in the liquid layer, leading to a greater emission of acoustic and shock waves as compared to ambient air conditions [26,27].”
BackgroundŠvrček, V., Sasaki, T., Shimizu, Y., & Koshizaki, N. (2008) · Journal of Applied Physics · doi:10.1063/1.2830798 · Cited by 19
Stochastic features of rough surfaces: analysis of laser-induced silicon surface modification
Vahabi, M., Jafari, G., Mansour, N., Karimzadeh, R., & Zamiranvari, J. (2008) · Journal of Statistical Mechanics Theory and Experiment · doi:10.1088/1742-5468/2008/03/p03002 · Cited by 19
Pulsed-laser micropatterned quantum-dot array for white light source
Wang, S., Lin, H.-Y., Lin, C., Kao, T. S., Chen, K.-J., Han, H.-V., Li, J.-R., Lee, P.-T., Chen, H.-M., Hong, M., et al. (2016) · Scientific Reports · doi:10.1038/srep23563 · Cited by 19
Self-citationConfined geometry and laser energy affect laser plasma propulsion
Yu, H., Wu, X., Yuan, Y., Li, H., & Yang, J. (2019) · Optics Express · doi:10.1364/oe.27.009763 · Cited by 19
Wang, S., Dou, K., Zou, Y., Dong, Y., Li, J., Ju, D., & Zeng, H. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.08.072 · Cited by 18
Ye, Y., Wu, M., Ren, X., Zhou, J., & Li, L. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.08.117 · Cited by 18
Preparation of porous structures on copper microchannel surfaces by laser writing
Deng, D., Chen, X., Chen, L., Lian, Y., & Fu, T. (2019) · Science China Technological Sciences · doi:10.1007/s11431-018-9430-9 · Cited by 18
Self-citationPulsed laser ablation in a cooled liquid environment
Hong, M. H., Ng, K. Y., Xie, Q., Shi, L. P., & Chong, T. C. (2008) · Applied Physics A · doi:10.1007/s00339-008-4675-z · Cited by 17
Self-citationNagli, L., Prosnyakov, A. A., Gaft, M., & Raichlin, Y. (2021) · Spectrochimica Acta Part B Atomic Spectroscopy · doi:10.1016/j.sab.2021.106246 · Cited by 17
Hopman, S., Fell, A., Mayer, K. M., Mesec, M., Rodofili, A., & Kray, D. (2009) · Applied Physics A · doi:10.1007/s00339-009-5087-4 · Cited by 17
Mikami, K., Hasegawa, N., Kitamura, T., Okada, H., Kondo, S., & Nishikino, M. (2020) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ab9849 · Cited by 16
van der Linden, S., Hagmeijer, R., & Römer, G. R. B. E. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.148005 · Cited by 18
“A similar trend has been observed for nanosecond pulsed ablation of silicon [5,6] and aluminum [7].”
Background
Metadata
- Authors
- Zhu, S., Lu, Y. F., Hong, M. H., & Chen, X. Y.
- Affiliations
- Data Storage Institute (SG)
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2001-02-15
- Volume
- 89
- Issue
- 4
- Pages
- 2400-2403
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2002002551
- Cited by
- 193
- References
- 15
- Citations by year
- 2026: 4 · 2025: 7 · 2024: 3 · 2023: 9 · 2022: 5 · 2021: 7 · 2020: 12 · 2019: 16 · 2018: 10 · 2017: 6 · 2016: 7 · 2015: 14 · 2014: 4 · 2013: 10 · 2012: 10
- FWCI
- 9.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Physics (publishedVersion)
- National University of Singapore (submittedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Chemistry › Spectroscopy › Laser-induced spectroscopy and plasma
- Keywords
- laser ablation, water film, plasma pressure, acoustic wave detection, real-time monitoring, solid substrates, laser-plasma interaction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.