The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting
Abstract
The analysis of the mechanics of orthogonal cutting with a type 2 chip as presented in the first paper of this series can be extended by introducing those physical properties of the work material which control its plastic behavior. One evident plasticity condition is the equality of the shear stress on the plane of shear to the shear strength of the metal. If it is also assumed that the shear strength of the work material is a constant and is the only quantity controlling its plastic behavior, then a very simple additional plasticity condition is obtained by application of the principle of minimum energy. This condition is 2φ+τ−α=90°, where φ is the shear angle, τ the friction angle, and α the rake angle. This condition, however, is found by experiment to be a poor approximation in the case of polycrystalline metals. A very good approximation is obtained, though, if use is made of the fact that the shear strength of the polycrystalline metal is actually a function of the compressive stress on the shear plane. The resulting plasticity condition is cot (2φ+τ−α)=k, where k is the slope of the linear curve relating shear strength and compressive stress, and is thus a constant of the work material. Such a plasticity condition establishes a relationship between the force system and the geometry of chip formation, so that, if k and the shear strength be known for a given material, all forces involved in cutting it can be calculated with reasonably good accuracy directly from measurements of chip geometry only, without use of a tool dynamometer. This is of importance in the analysis of practical machining operations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Barrett, C. S. (2007) · Cited by 2,354
Cited by
Mechanics of Saw-Tooth Chip Formation in Metal Cutting
Vyas, A., & Shaw, M. C. (1999) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2831200 · Cited by 301
Atkins, A. G. (2003) · International Journal of Mechanical Sciences · doi:10.1016/s0020-7403(03)00040-7 · Cited by 283
The assessment of plastic deformation in metal cutting
Astakhov, V. P., & Shvets, S. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.10.015 · Cited by 163
Nouari, M., & Makich, H. (2013) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2013.04.011 · Cited by 117
Microwedge Machining for the Manufacture of Directional Dry Adhesives
Day, P., Eason, E. V., Esparza, N., Christensen, D., & Cutkosky, M. (2013) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4023161 · Cited by 112
“…resemblance to two classical problems from plane-strain plasticity theory: oblique wedge indenting [29,30], in which a rigid wedge-shaped tool penetrates the work surface, and orthogonal machining [31–33], in which the tool removes a thin strip of material by moving parallel to the work surface.”
BackgroundResult
Metadata
- Authors
- Merchant, M. E.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1945-06-01
- Volume
- 16
- Issue
- 6
- Pages
- 318-324
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1969720648
- Cited by
- 768
- References
- 1
- FWCI
- 9.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.