The DOI matches its Crossref record.
Measurement of Strains at Si-SiO2 Interface
Abstract
When Si is thermally oxidized, the SiO2 resulting is in a state of compression on the surface. This paper reports an experimental determination of the magnitude of this stress and its dependence on the temperature of oxidation. Samples of (111)- and (100)-oriented Si were oxidized at several temperatures between 875°–1200°C to thicknesses of 2000 Å-20 000 Å. Stress determination was made by two techniques: (a) the thin Si sample was used as a beam, and the amount of bowing under the strain exerted by oxide left on one surface was measured; (b) the unsupported SiO2 window was used as a balloon, and strain was measured as a function of air pressure inflating the balloon. Results of these measurements are in agreement with the stress expected from thermal mismatch of Si and SiO2. For an oxidation carried out at 1200°C the measured stress is 3.1×109 dyn/cm2. The data from the SiO2 balloons showed that the strain grown in the oxide was greater than 10−3. In addition, determination was made of Young's modulus from the stress-strain curves of the unsupported films. The value of 6.6×1011 dyn/cm2 obtained compares favorably with the value 7±1.5 1011 dyn/cm2 found for silicate glasses. Some implications of this stress are briefly discussed. Dislocation generation at borders of holes cut into oxide, bowing and slip processes of slices, impurity segregation, and precipitation are all possible results of this mismatch between the two materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electronic properties of two-dimensional systems
Ando, T., Fowler, A. B., & Stern, F. (1982) · Reviews of Modern Physics · doi:10.1103/revmodphys.54.437 · Cited by 7,455
Calculated elastic constants for stress problems associated with semiconductor devices
Brantley, W. A. (1973) · Journal of Applied Physics · doi:10.1063/1.1661935 · Cited by 1,203
Cantilever-like micromechanical sensors
Boisen, A., Dohn, S., Keller, S. S., Schmid, S., & Tenje, M. (2011) · Reports on Progress in Physics · doi:10.1088/0034-4885/74/3/036101 · Cited by 566
Infrared spectroscopic analysis of the Si/SiO2 interface structure of thermally oxidized silicon
Queeney, K. T., Weldon, M. K., Chang, J. P., Chabal, Y. J., Gurevich, A. B., Sapjeta, J., & Opila, R. L. (2000) · Journal of Applied Physics · doi:10.1063/1.372017 · Cited by 259
Metadata
- Authors
- Jaccodine, R. J., & Schlegel, W. A.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1966-05-01
- Volume
- 37
- Issue
- 6
- Pages
- 2429-2434
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1986180969
- Cited by
- 406
- References
- 0
- FWCI
- 8.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Measurement of Strains at Si-SiO2 Interface. https://app.cochat.ai/papers/10.1063/1.1708831
- The paper
- Jaccodine, R. J., & Schlegel, W. A. (1966). Measurement of Strains at Si-SiO2 Interface. Journal of Applied Physics. https://doi.org/10.1063/1.1708831
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.