The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High Frequency Recording with Electrostatically Deflected Ink Jets
Abstract
A high speed oscillograph, using ordinary ink and paper, has been developed that provides a new approach to the old problem of producing instantly visible, high frequency records with inexpensive writing materials. A high speed jet of ordinary fountain-pen ink is divided into a uniform procession of drops, each of which is independently charged in proportion to an input-signal voltage. After projection through a constant transverse-deflecting field, the charged drops are collected on a moving chart to form an instantly visible, permanent record of the input signal. Drops are typically formed at a rate of 100 000/sec; each has an independent trajectory and makes an individual mark representing an independent sample of the input waveform. The ink stream may be switched on or off at high speed by providing, between the drop-launching point and the record surface, a collector that intercepts drops having a specific trajectory. Besides oscillography, which is discussed in detail, the technique has applications in other fields requiring marking at high speed or marking without pressure or physical contact.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, B. M., Pierce, J. R., & Shannon, C. E. (1948) · Proceedings of the IRE · doi:10.1109/jrproc.1948.231941 · Cited by 273
Cited by
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
A microfabricated fluorescence-activated cell sorter
Fu, A. Y., Spence, C., Scherer, A., Arnold, F. H., & Quake, S. R. (1999) · Nature Biotechnology · doi:10.1038/15095 · Cited by 878
Fluorescence Activated Cell Sorting
Bonner, W. A., Hulett, H. R., Sweet, R. G., & Herzenberg, L. A. (1972) · Review of Scientific Instruments · doi:10.1063/1.1685647 · Cited by 777
Self-citationInkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Convery, N., & Gadegaard, N. (2019) · Micro and Nano Engineering · doi:10.1016/j.mne.2019.01.003 · Cited by 602
The dynamics of the piezo inkjet printhead operation☆
Wijshoff, H. (2010) · Physics Reports · doi:10.1016/j.physrep.2010.03.003 · Cited by 593
Inkjet printing of conductive materials: a review
Cummins, G., & Desmulliez, M. P. Y. (2012) · Circuit World · doi:10.1108/03056121211280413 · Cited by 504
Small‐scale free surface flows with breakup: Drop formation and emerging applications
Basaran, O. A. (2002) · AIChE Journal · doi:10.1002/aic.690480902 · Cited by 478
Fabrication of novel three-dimensional microstructures by the anisotropic etching of
Bassous, E. (1978) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1978.19249 · Cited by 309
Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications
Zub, K., Hoeppener, S., & Schubert, U. S. (2022) · Advanced Materials · doi:10.1002/adma.202105015 · Cited by 287
Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performance
Guo, Y., Patanwala, H. S., Bognet, B., & Ma, A. W. K. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0076 · Cited by 258
Metadata
- Authors
- Sweet, R. G.
- Venue
- Review of Scientific Instruments
- Publisher
- AIP Publishing
- Published
- 1965-02-01
- Volume
- 36
- Issue
- 2
- Pages
- 131-136
- ISSN
- 0034-6748 (ISSN-L)
- 1089-7623
- OpenAlex
- W2064569468
- Cited by
- 243
- References
- 1
- FWCI
- 2.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.