The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Hydrodynamics of oscillating atomic force microscopy cantilevers in viscous fluids
Abstract
We present a study of thermal noise of commercially available atomic force microscopy (AFM) cantilevers in air and in water. The purpose of this work is to investigate the oscillation behavior of a clamped AFM microlever in liquids. Up to eight vibration modes are recorded. The experimental results are compared to theoretical predictions from the hydrodynamic functions corresponding to rigid transverse oscillations of an infinitely long rectangular beam. Except for the low-frequency modes, the known hydrodynamic functions cannot describe the amount of dissipated energy due to the liquid motion induced by the cantilever oscillation. The observed variation of the damping coefficient is smaller than the one predicted. The difference at higher modes between the mentioned theoretical description and experimental results is discussed with the help of numerical solutions of the three-dimensional Navier–Stokes equation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Calculation of thermal noise in atomic force microscopy
Butt, H. J., & Jaschke, M. (1995) · Nanotechnology · doi:10.1088/0957-4484/6/1/001 · Cited by 1,589
Sader, J. E. (1998) · Journal of Applied Physics · doi:10.1063/1.368002 · Cited by 1,410
Vibrations of free and surface-coupled atomic force microscope cantilevers: Theory and experiment
Rabe, U., Janser, K., & Arnold, W. (1996) · Review of Scientific Instruments · doi:10.1063/1.1147409 · Cited by 683
Short cantilevers for atomic force microscopy
Walters, D. A., Cleveland, J. P., Thomson, N. H., Hansma, P. K., Wendman, M. A., Gurley, G., & Elings, V. (1996) · Review of Scientific Instruments · doi:10.1063/1.1147177 · Cited by 494
Small cantilevers for force spectroscopy of single molecules
Viani, M. B., Schäffer, T. E., Chand, A., Rief, M., Gaub, H. E., & Hansma, P. K. (1999) · Journal of Applied Physics · doi:10.1063/1.371039 · Cited by 386
Schäffer, T. E., & Hansma, P. K. (1998) · Journal of Applied Physics · doi:10.1063/1.368707 · Cited by 81
Metadata
- Authors
- Maali, A., Hurth, C., Boisgard, R., Jai, C., Cohen-Bouhacina, T., & Aimé, J.-P.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2005-03-29
- Volume
- 97
- Issue
- 7
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2037838910
- Cited by
- 270
- References
- 6
- FWCI
- 7.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.