Potential fluctuations and energetic ion production in hollow cathode discharges
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Ions with energies significantly in excess of the applied discharge voltage have been reported for many years in hollow cathode discharges. Models of dc potential hills downstream of the cathode and instabilities in postulated double layers in the cathode orifice have been proposed to explain this, but have not been substantiated. Measurements of the dc and rf plasma density and potential profiles near the exit of hollow cathodes by miniature fast-scanning probes suggests that turbulent ion acoustic fluctuations and ionization instabilities in the cathode plume significantly increase the energy of the ions that flow from this region. Increases in the discharge current and/or decreases in the cathode gas flow enhance the amplitude of the fluctuations and increase the number and energy of the energetic ions, which increases the erosion rate of the cathode electrodes. The transition from the quiescent “spot mode” to the noisy “plume mode” characteristic of these discharges is found to be a gradual transition of increasing fluctuation amplitudes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Goebel, D. M., Jameson, K. K., Watkins, R. M., Katz, I., & Mikellides, I. G. (2005) · Journal of Applied Physics · doi:10.1063/1.2135417 · Cited by 129
Self-citationPlasma processes inside dispenser hollow cathodes
Mikellides, I. G., Katz, I., Goebel, D. M., Polk, J. E., & Jameson, K. K. (2006) · Physics of Plasmas · doi:10.1063/1.2208292 · Cited by 46
Self-citation
Cited by
An overview of discharge plasma modeling for Hall effect thrusters
Hara, K. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab0f70 · Cited by 120
Goebel, D. M., Becatti, G., Mikellides, I. G., & Lopez Ortega, A. (2021) · Journal of Applied Physics · doi:10.1063/5.0051228 · Cited by 95
Self-citationHollow cathode modeling: II. Physical analysis and parametric study
Sary, G., Garrigues, L., & Boeuf, J.-P. (2017) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/aa6210 · Cited by 57
“However, it is generally associated in the literature with an ionization instability of the plume rather than with a ion acoustic instability induced mode [2].”
BackgroundResultInfluentialNumerical Simulations of the Partially Ionized Gas in a 100-A LaB6 Hollow Cathode
Mikellides, I. G., Goebel, D. M., Jorns, B. A., Polk, J. E., & Guerrero, P. (2015) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2014.2320876 · Cited by 48
Self-citationHara, K., & Treece, C. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab18e4 · Cited by 36
Metadata
- Authors
- Goebel, D. M., Jameson, K. K., Katz, I., & Mikellides, I. G.
- Venue
- Physics of Plasmas
- Publisher
- AIP Publishing
- Published
- 2007-10-01
- Volume
- 14
- Issue
- 10
- ISSN
- 1070-664X (ISSN-L)
- 1089-7674
- OpenAlex
- W1966555283
- Cited by
- 151
- References
- 2
- FWCI
- 3.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.