The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Carbon nanoadditives to enhance latent energy storage of phase change materials
Abstract
Latent energy storage capacity was analyzed for a system consisting of carbon nanoparticles doped phase change materials (PCMs). Three types of samples were prepared by doping shell wax with single wall carbon nanotubes (SWCNTs), multiwall CNTs, and carbon nanofibers. Differential scanning calorimetry was used to measure the latent heat of fusion. The measured values of latent heat for all the samples showed a good enhancement over the latent heat of pure wax. A maximum enhancement of approximately 13% was observed for the wax/SWCNT composite corresponding to 1% loading of SWCNT. The change in latent heat was modeled by using an approximation for the intermolecular attraction based on the Lennard-Jones potential. A theoretical model was formulated to estimate the overall latent energy of the samples with the variation in volume fraction of the nanoparticles. The predicted values of latent energy from the model showed good agreement with the experimental results. It was concluded that the higher molecular density of the SWCNT and its large surface area were the reasons behind the greater intermolecular attraction in the wax/SWCNT composite, which resulted in its enhanced latent energy. The novel approach used to predict the latent heat of fusion of the wax/nanoparticle composites has a particular significance for investigating the latent heat of PCM with different types of nanoparticle additives.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Intermolecular and Surface Forces
(2011) · Intermolecular and Surface Forces · doi:10.1016/b978-0-12-391927-4.10024-6 · Cited by 16,923
Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material
Py, X., Olives, R., & Mauran, S. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00309-4 · Cited by 618
Characterization of Alkanes and Paraffin Waxes for Application as Phase Change Energy Storage Medium
HIMRAN, S., SUWONO, A., & MANSOORI, G. A. (1994) · Energy Sources · doi:10.1080/00908319408909065 · Cited by 437
Effect of carbon nanofiber additives on thermal behavior of phase change materials
Elgafy, A., & Lafdi, K. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.042 · Cited by 430
Self-citationThermal conductivity enhancement of energy storage media using carbon fibers
Fukai, J., Kanou, M., Kodama, Y., & Miyatake, O. (2000) · Energy Conversion and Management · doi:10.1016/s0196-8904(99)00166-1 · Cited by 395
Thermal performance of palmitic acid as a phase change energy storage material
Sari, A., & Kaygusuz, K. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(01)00071-1 · Cited by 195
Heat and mass transfer in consolidated reacting beds for thermochemical systems
Mauran, S., Prades, P., & L'Haridon, F. (1993) · Heat Recovery Systems and CHP · doi:10.1016/0890-4332(93)90055-z · Cited by 189
Carbon foam matrices saturated with PCM for thermal protection purposes
Mesalhy, O., Lafdi, K., & Elgafy, A. (2006) · Carbon · doi:10.1016/j.carbon.2005.12.019 · Cited by 179
Self-citationBaran, G., & Sarı, A. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00104-3 · Cited by 132
Wang, J., Ouyang, Y., & Chen, G. (2001) · International Journal of Energy Research · doi:10.1002/er.695 · Cited by 120
Cited by
Organic phase change materials and their textile applications: An overview
Sarier, N., & Onder, E. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.04.013 · Cited by 681
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Review on thermal properties of nanofluids: Recent developments
Angayarkanni, S. A., & Philip, J. (2015) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.08.014 · Cited by 492
Eanest Jebasingh, B., & Valan Arasu, A. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.031 · Cited by 477
Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
Electro- and Photodriven Phase Change Composites Based on Wax-Infiltrated Carbon Nanotube Sponges
Chen, L., Zou, R., Xia, W., Liu, Z., Shang, Y., Zhu, J., Wang, Y., Lin, J., Xia, D., & Cao, A. (2012) · ACS Nano · doi:10.1021/nn304310n · Cited by 445
Cui, Y., Liu, C., Hu, S., & Yu, X. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.021 · Cited by 423
Khodadadi, J. M., Fan, L., & Babaei, H. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.031 · Cited by 422
Leong, K. Y., Abdul Rahman, M. R., & Gurunathan, B. A. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.008 · Cited by 405
Nanoparticles enhanced phase change materials (NePCMs)-A recent review
Tariq, S. L., Ali, H. M., Akram, M. A., Janjua, M. M., & Ahmadlouydarab, M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115305 · Cited by 405
Xia, L., Zhang, P., & Wang, R. Z. (2010) · Carbon · doi:10.1016/j.carbon.2010.03.030 · Cited by 397
Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2010) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395
Gao, H., Wang, J., Chen, X., Wang, G., Huang, X., Li, A., & Dong, W. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.007 · Cited by 391
Thermal properties of paraffin based composites containing multi-walled carbon nanotubes
Wang, J., Xie, H., & Xin, Z. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.01.022 · Cited by 373
Supercooling of phase-change materials and the techniques used to mitigate the phenomenon
Zahir, M. H., Mohamed, S. A., Saidur, R., & Al-Sulaiman, F. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.045 · Cited by 348
Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: A review
Mahdi, J. M., Lohrasbi, S., & Nsofor, E. C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.03.111 · Cited by 337
A review on thermophysical properties of nanoparticle dispersed phase change materials
Kibria, M. A., Anisur, M. R., Mahfuz, M. H., Saidur, R., & Metselaar, I. H. S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.02.028 · Cited by 317
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Improving thermal conductivity phase change materials—A study of paraffin nanomagnetite composites
Şahan, N., Fois, M., & Paksoy, H. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.01.027 · Cited by 292
Reddy, K. S., Mudgal, V., & Mallick, T. K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2017.11.005 · Cited by 290
Nano-PCMs for enhanced energy storage and passive cooling applications
Colla, L., Fedele, L., Mancin, S., Danza, L., & Manca, O. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.03.161 · Cited by 283
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Kalapala, L., & Devanuri, J. K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.10.024 · Cited by 269
Li, M., & Mu, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.085 · Cited by 265
Malik, M., Dincer, I., & Rosen, M. A. (2016) · International Journal of Energy Research · doi:10.1002/er.3496 · Cited by 257
Hosseinzadeh, K., Erfani Moghaddam, M. A., Asadi, A., Mogharrebi, A. R., Jafari, B., Hasani, M. R., & Ganji, D. D. (2021) · Alexandria Engineering Journal · doi:10.1016/j.aej.2020.12.001 · Cited by 171
Li, A., Wang, J., Dong, C., Dong, W., Atinafu, D. G., Chen, X., Gao, H., & Wang, G. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.106 · Cited by 122
Chen, X., Tang, Z., Gao, H., Chen, S., & Wang, G. (2020) · iScience · doi:10.1016/j.isci.2020.101208 · Cited by 98
Comprehensive evaluation of Paraffin-HDPE shape stabilized PCM with hybrid carbon nano-additives
Qu, Y., Wang, S., Tian, Y., & Zhou, D. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114404 · Cited by 88
“conductive additives to the PCM, such as carbon nano-additives (CNs) [5]-[7] and metal nano-particles [8]-[9], in which, CNs are considered as the most promising additives.”
BackgroundJavadi, H., Urchueguia, J. F., Mousavi Ajarostaghi, S. S., & Badenes, B. (2020) · Energies · doi:10.3390/en13195156 · Cited by 54
Preparation and characterization of composite phase change materials containing nanoparticles
College of Aerospace and Civil Engineering, H. E. U., Yu, J., Yu, Z., College of Aerospace and Civil Engineering, H. E. U., Tang, C., College of Aerospace and Civil Engineering, H. E. U., Chen, X., College of Aerospace and Civil Engineering, H. E. U., Song, Q., College of Aerospace and Civil Engineering, H. E. U., et al. (2016) · Kemija u industriji · doi:10.15255/kui.2016.015 · Cited by 2
Metadata
- Authors
- Shaikh, S., Lafdi, K., & Hallinan, K.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2008-05-01
- Volume
- 103
- Issue
- 9
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2034531759
- Cited by
- 256
- References
- 10
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.