The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
The maximum possible conversion efficiency of silicon-germanium thermoelectric generators
Abstract
The thermoelectric properties of N-type and P-type Si-Ge alloys have been reviewed and detailed calculations for the efficiency of a thermoelectric generator made from a 70% Si-30% Ge alloy have been made over the temperature range from 300 to 1300 K. A model employing one valence band and two conduction bands has been used. A generator of standard material, optimally doped, and infinitely segmented will have an efficiency of 12.1% operating over this range. If the lattice thermal conductivity can be reduced to its minimum value without upsetting the electrical properties, then the efficiency can be raised to an ultimate maximum of 23.3%. A more modest increase in efficiency to 14.7% could be obtained by a 2.4 volume percent of finely dispersed second-phase precipitates which would act as phonon scatterers. The utility/futility of GaP additions and grain-boundary scattering as methods to increase the efficiency is discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Temperature dependence of the energy gap in semiconductors
Varshni, Y. P. (1967) · Physica · doi:10.1016/0031-8914(67)90062-6 · Cited by 5,469
Ziman, J. M., & Levy, P. W. (1961) · Physics Today · doi:10.1063/1.3057244 · Cited by 3,368
A First Course in Numerical Analysis
Maisel, H., & Ralston, A. (1966) · Technometrics · doi:10.1080/00401706.1966.10490393 · Cited by 2,560
Thermal Conductivity of Silicon and Germanium from 3°K to the Melting Point
Glassbrenner, C. J., & Slack, G. A. (1964) · Physical Review · doi:10.1103/physrev.134.a1058 · Cited by 1,652
Self-citationLattice Thermal Conductivity of Disordered Semiconductor Alloys at High Temperatures
Abeles, B. (1963) · Physical Review · doi:10.1103/physrev.131.1906 · Cited by 1,148
Electrical Properties of Silicon Containing Arsenic and Boron
Morin, F. J., & Maita, J. P. (1954) · Physical Review · doi:10.1103/physrev.96.28 · Cited by 1,007
Note on the conduction of heat in crystals
Casimir, H. B. G. (1938) · Physica · doi:10.1016/s0031-8914(38)80162-2 · Cited by 879
Determination of Optical Constants and Carrier Effective Mass of Semiconductors
Spitzer, W. G., & Fan, H. Y. (1957) · Physical Review · doi:10.1103/physrev.106.882 · Cited by 760
Energy band structure in p-type germanium and silicon
Kane, E. O. (1956) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(56)90014-2 · Cited by 710
Thurmond, C. D. (1975) · Journal of The Electrochemical Society · doi:10.1149/1.2134410 · Cited by 688
Cited by
Enhanced Thermoelectric Figure-of-Merit in Nanostructured p-type Silicon Germanium Bulk Alloys
Joshi, G., Lee, H., Lan, Y., Wang, X., Zhu, G., Wang, D., Gould, R. W., Cuff, D. C., Tang, M. Y., Dresselhaus, M. S., et al. (2008) · Nano Letters · doi:10.1021/nl8026795 · Cited by 1,119
Semiconducting Ge clathrates: Promising candidates for thermoelectric applications
Nolas, G. S., Cohn, J. L., Slack, G. A., & Schujman, S. B. (1998) · Applied Physics Letters · doi:10.1063/1.121747 · Cited by 962
Self-citationEnhancement of Thermoelectric Figure‐of‐Merit by a Bulk Nanostructuring Approach
Lan, Y., Minnich, A. J., Chen, G., & Ren, Z. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901512 · Cited by 903
Enhanced thermoelectric figure of merit in nanostructured n-type silicon germanium bulk alloy
Wang, X. W., Lee, H., Lan, Y. C., Zhu, G. H., Joshi, G., Wang, D. Z., Yang, J., Muto, A. J., Tang, M. Y., Klatsky, J., et al. (2008) · Applied Physics Letters · doi:10.1063/1.3027060 · Cited by 755
When thermoelectrics reached the nanoscale
Heremans, J. P., Dresselhaus, M. S., Bell, L. E., & Morelli, D. T. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.129 · Cited by 628
Some properties of semiconducting IrSb3
Slack, G. A., & Tsoukala, V. G. (1994) · Journal of Applied Physics · doi:10.1063/1.357750 · Cited by 554
Self-citationMAHAN, G. D. (1998) · Solid State Physics · doi:10.1016/s0081-1947(08)60190-3 · Cited by 541
Recent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
New Materials and Performance Limits for Thermoelectric Cooling
Slack, G. (1995) · CRC Handbook of Thermoelectrics · doi:10.1201/9781420049718.ch34 · Cited by 423
Self-citation“Nanoparticle-in-Alloy” Approach to Efficient Thermoelectrics: Silicides in SiGe
Mingo, N., Hauser, D., Kobayashi, N. P., Plissonnier, M., & Shakouri, A. (2009) · Nano Letters · doi:10.1021/nl8031982 · Cited by 405
Enhancement of the thermoelectric properties in nanoscale and nanostructured materials
Szczech, J. R., Higgins, J. M., & Jin, S. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02755c · Cited by 405
Thermoelectrical properties of A-site substituted Ca1−xRexMnO3 system
Flahaut, D., Mihara, T., Funahashi, R., Nabeshima, N., Lee, K., Ohta, H., & Koumoto, K. (2006) · Journal of Applied Physics · doi:10.1063/1.2362922 · Cited by 260
Thermal Transport in Graphene Oxide – From Ballistic Extreme to Amorphous Limit
Mu, X., Wu, X., Zhang, T., Go, D. B., & Luo, T. (2014) · Scientific Reports · doi:10.1038/srep03909 · Cited by 255
Determining the Kapitza resistance and the thermal conductivity of polycrystals: A simple model
Nan, C.-W., & Birringer, R. (1998) · Physical Review B · doi:10.1103/physrevb.57.8264 · Cited by 235
Cheaito, R., Duda, J. C., Beechem, T. E., Hattar, K., Ihlefeld, J. F., Medlin, D. L., Rodriguez, M. A., Campion, M. J., Piekos, E. S., & Hopkins, P. E. (2012) · Physical Review Letters · doi:10.1103/physrevlett.109.195901 · Cited by 175
Metadata
- Authors
- Slack, G. A., & Hussain, M. A.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1991-09-01
- Volume
- 70
- Issue
- 5
- Pages
- 2694-2718
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1987012362
- Cited by
- 382
- References
- 37
- FWCI
- 4.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.