The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Electrospinning jets and nanofibrous structures
Open accessAbstract
Electrospinning is a process that creates nanofibers through an electrically charged jet of polymer solution or melt. This technique is applicable to virtually every soluble or fusible polymer and is capable of spinning fibers in a variety of shapes and sizes with a wide range of properties to be used in a broad range of biomedical and industrial applications. Electrospinning requires a very simple and economical setup but is an intricate process that depends on several molecular, processing, and technical parameters. This article reviews information on the three stages of the electrospinning process (i.e., jet initiation, elongation, and solidification). Some of the unique properties of the electrospun structures have also been highlighted. This article also illustrates some recent innovations to modify the electrospinning process. The use of electrospun scaffolds in the field of tissue engineering and regenerative medicine has also been described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vaz, C. M., van Tuijl, S., Bouten, C. V. C., & Baaijens, F. P. T. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.06.006 · Cited by 459
Electrospinning polydioxanone for biomedical applications
Boland, E. D., Coleman, B. D., Barnes, C. P., Simpson, D. G., Wnek, G. E., & Bowlin, G. L. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2004.09.003 · Cited by 302
Self-citationAngiogenic potential of human macrophages on electrospun bioresorbable vascular grafts
Garg, K., Sell, S. A., Madurantakam, P., & Bowlin, G. L. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/3/031001 · Cited by 48
Self-citation
Cited by
Electrospinning for tissue engineering applications
Rahmati, M., Mills, D. K., Urbanska, A. M., Saeb, M. R., Venugopal, J. R., Ramakrishna, S., & Mozafari, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100721 · Cited by 816
Electrospinning versus fibre production methods: from specifics to technological convergence
Luo, C. J., Stoyanov, S. D., Stride, E., Pelan, E., & Edirisinghe, M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35083a · Cited by 691
Developments of Advanced Electrospinning Techniques: A Critical Review
Li, Y., Zhu, J., Cheng, H., Li, G., Cho, H., Jiang, M., Gao, Q., & Zhang, X. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100410 · Cited by 578
The History of Electrospinning: Past, Present, and Future Developments
Keirouz, A., Wang, Z., Reddy, V. S., Nagy, Z. K., Vass, P., Buzgo, M., Ramakrishna, S., & Radacsi, N. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201723 · Cited by 457
Electrospinning: Processes, Structures, and Materials
Ahmadi Bonakdar, M., & Rodrigue, D. (2024) · Macromol · doi:10.3390/macromol4010004 · Cited by 380
Metadata
- Authors
- Garg, K., & Bowlin, G. L.
- Venue
- Biomicrofluidics
- Publisher
- AIP Publishing
- Published
- 2011-03-01
- Volume
- 5
- Issue
- 1
- Pages
- 13403-13403
- ISSN
- 1932-1058 (ISSN-L)
- OpenAlex
- W2018860941
- Cited by
- 474
- References
- 3
- FWCI
- 6.30
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrospinning jets and nanofibrous structures. https://app.cochat.ai/papers/10.1063/1.3567097
- The paper
- Garg, K., & Bowlin, G. L. (2011). Electrospinning jets and nanofibrous structures. Biomicrofluidics. https://doi.org/10.1063/1.3567097
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.