Cited by 2,911High Entropy Alloys StudiesIntermetallics and Advanced Alloy PropertiesMetallic Glasses and Amorphous Alloys

The DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

Guo, Sheng, Ng, Chun, Lu, Jian, Liu, C. T.·2011·Journal of Applied Physics

DOI 10.1063/1.3587228

Open this paper in CoChat — free account

Abstract

Phase stability is an important topic for high entropy alloys (HEAs), but the understanding to it is very limited. The capability to predict phase stability from fundamental properties of constituent elements would benefit the alloy design greatly. The relationship between phase stability and physicochemical/thermodynamic properties of alloying components in HEAs was studied systematically. The mixing enthalpy is found to be the key factor controlling the formation of solid solutions or compounds. The stability of fcc and bcc solid solutions is well delineated by the valance electron concentration (VEC). The revealing of the effect of the VEC on the phase stability is vitally important for alloy design and for controlling the mechanical behavior of HEAs.

Integrity signals

Registry

Crossref · 10.1063/1.3587228

Cites

27 of 27 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,215
Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element
Takeuchi, A., & Inoue, A. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.2817 · Cited by 4,976
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,255
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,971
Recent progress in high-entropy alloys
Yeh, J. (2006) · European Journal of Control · doi:10.3166/acsm.31.633-648 · Cited by 2,144
Microstructure characterization of Alx CoCrCuFeNi high-entropy alloy system with multiprincipal elements
Tong, C. H., Chen, Y., Yeh, J., Lin, S.-J., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0283-0 · Cited by 1,242
Calculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys
Takeuchi, A., & Inoue, A. (2000) · Materials Transactions JIM · doi:10.2320/matertrans1989.41.1372 · Cited by 888
Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys
Wang, X. F., Zhang, Y., Qiao, Y., & Chen, G. L. (2006) · Intermetallics · doi:10.1016/j.intermet.2006.08.005 · Cited by 721
On the elemental effect of AlCoCrCuFeNi high-entropy alloy system
Tung, C.-C., Yeh, J., Shun, T.-T., Chen, S.-K., Huang, Y.-S., & Chen, H.-C. (2006) · Materials Letters · doi:10.1016/j.matlet.2006.03.140 · Cited by 630
Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys
Senkov, O. N., & Miracle, D. B. (2001) · Materials Research Bulletin · doi:10.1016/s0025-5408(01)00715-2 · Cited by 583

Flagged first, then by citations

Show all 28 references

1 of the 28 references couldn’t be matched to a known paper.

Research works printed but not linked: 3

2008, Adv. Eng. Mater., 10, 534, 10.1002/adem.v10:6 · DOI
1996, Physical Metallurgy
1984, Inter. Met. Rev., 29, 168

Sorted by citations

A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 9,065
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z. Y., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,238
High-Entropy Alloys: A Critical Review
Tsai, M., & Yeh, J. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,508
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lü, J., Liu, C. T., & Yang, Y. G. (2015) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,064
Self-citation
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
Guo, S. L., & Liu, C. T. (2011) · Progress in Natural Science Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,547
Self-citation
Alloy Design Strategies and Future Trends in High-Entropy Alloys
Yeh, J. (2013) · JOM · doi:10.1007/s11837-013-0761-6 · Cited by 1,801
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Lu, Y., Dong, Y., Guo, S. L., Jiang, L., Kang, H., Wang, T., Wen, B., Wang, Z., Jie, J., Cao, Z., et al. (2014) · Scientific Reports · doi:10.1038/srep06200 · Cited by 1,756
Self-citation
Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system
He, J., Liu, W. H., Wang, H., Wu, Y., Liu, X., Nieh, T. G., & Lü, Z. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,538
Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys
Wang, W.-R., Wang, W., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,524
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,351
Science and technology in high-entropy alloys
Zhang, W., Liaw, P. K., & Zhang, Y. (2018) · Science China Materials · doi:10.1007/s40843-017-9195-8 · Cited by 1,142
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L. J., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,120
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,071
Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys
Wu, Z., Bei, H., Otto, F., Pharr, G. M., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.10.024 · Cited by 913
Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 869
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C., Chuang, A. C., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 815
More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
Guo, S. L., Hu, Q., Ng, C., & Liu, C. T. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.05.002 · Cited by 805
Self-citation
Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system
Salishchev, G. A., Tikhonovsky, М. А., Shaysultanov, D. G., Stepanov, N., Kuznetsov, A. V., Kolodiy, I. V., Tortika, A. S., & Senkov, O. N. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.12.210 · Cited by 704
High-entropy Alloys with High Saturation Magnetization, Electrical Resistivity and Malleability
Zhang, Y., Zuo, T., Cheng, Y. Q., & Liaw, P. K. (2013) · Scientific Reports · doi:10.1038/srep01455 · Cited by 693
Colossal dielectric constant in high entropy oxides
Bérardan, D., Franger, S., Dragoé, D., Meena, A. K., & Dragoe, N. (2016) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201600043 · Cited by 696
A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 650
A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties
Wu, Y., Cai, Y., Wang, T., Si, J., Zhu, J. T., Wang, Y., & Hui, X. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.134 · Cited by 613
Recent progress of high-entropy materials for energy storage and conversion
Amiri, A., & Shahbazian‐Yassar, R. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta09578h · Cited by 604
Microstructures and properties of high-entropy alloy films and coatings: a review
Li, W., Liu, P., & Liaw, P. K. (2018) · Materials Research Letters · doi:10.1080/21663831.2018.1434248 · Cited by 587
High-entropy alloys in electrocatalysis: from fundamentals to applications
Ren, J.-T., Chen, L., Wang, H.-Y., & Yuan, Z.-Y. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00557g · Cited by 551
High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures
Li, D., Li, C., Feng, T., Zhang, Y., Sha, G., Lewandowski, J. J., Liaw, P. K., & Zhang, Y. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.10.038 · Cited by 533
Mechanical properties of refractory high-entropy alloys: Experiments and modeling
Yao, H., Qiao, J., Hawk, J. A., Zhou, H. F., Chen, M. W., & Gao, M. C. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.188 · Cited by 530
Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys
Han, Z., Chen, N., Zhao, S., Fan, L. W., Yang, G., Shao, Y., & Yao, K. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.01.007 · Cited by 532
High-entropy alloys: emerging materials for advanced functional applications
Wang, X., Guo, W., & Fu, Y. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta09601f · Cited by 536
Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys
Liu, W. H., He, J., Huang, H., Wang, H., Lü, Z., & Liu, C. T. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.01.004 · Cited by 514
Self-citation
Alloy design for intrinsically ductile refractory high-entropy alloys
Sheikh, S., Shafeie, S., Hu, Q., Ahlström, J., Persson, C., Veselý, J., Zýka, J., Klement, U., & Guo, S. L. (2016) · Journal of Applied Physics · doi:10.1063/1.4966659 · Cited by 512
Self-citation
Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy
Fu, Z., Chen, W., Wen, H., Zhang, D., Chen, Z., Zheng, B., Zhou, Y., & Lavernia, E. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.050 · Cited by 504
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
Poletti, M. G., & Battezzati, L. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.033 · Cited by 503
High-entropy alloys by mechanical alloying: A review
Vaidya, M., Muralikrishna, G. M., & Murty, B. S. (2019) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2019.37 · Cited by 497
Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy
Stepanov, N., Shaysultanov, D. G., Salishchev, G. A., & Tikhonovsky, М. А. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.11.162 · Cited by 498
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 492
Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties
Stein, F., & Leineweber, A. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05509-2 · Cited by 477
Oxidation behavior of arc melted AlCoCrFeNi multi-component high-entropy alloys
Butler, T. M., & Weaver, M. L. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.02.257 · Cited by 475
Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility
Chen, R., Qin, G., Zheng, H., Wang, L., Su, Y., Chiu, Y., Ding, H., Guo, J., & Fu, H. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.058 · Cited by 472
Phase Engineering of High‐Entropy Alloys
Chang, X., Zeng, M., Liu, K., & Fu, L. (2020) · Advanced Materials · doi:10.1002/adma.201907226 · Cited by 461
Phase prediction in high entropy alloys with a rational selection of materials descriptors and machine learning models
Zhang, Y., Wen, C., Wang, C., Antonov, S., Xue, D., Bai, Y., & Su, Y. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.11.067 · Cited by 473
A hexagonal close-packed high-entropy alloy: The effect of entropy
Zhao, Y. J., Qiao, J. W., Ma, S. G., Gao, M. C., Yang, H. J., Chen, M. W., & Zhang, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.149 · Cited by 446
Review and outlook on high-entropy alloys for hydrogen storage
Marques, F., Balcerzak, M., Winkelmann, F., Zepon, G., & Felderhoff, M. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01543e · Cited by 448
Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys
Stepanov, N., Shaysultanov, D. G., Salishchev, G. A., Tikhonovsky, М. А., Oleynik, E. E., Tortika, A. S., & Senkov, O. N. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.12.157 · Cited by 441
Mapping the world of complex concentrated alloys
Gorsse, S., Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.027 · Cited by 437
Criterion for Sigma Phase Formation in Cr- and V-Containing High-Entropy Alloys
Tsai, M., Tsai, K.-Y., Tsai, C., Lee, C., Juan, C.-C., & Yeh, J. (2013) · Materials Research Letters · doi:10.1080/21663831.2013.831382 · Cited by 430
Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
Guo, N. N., Wang, L., Luo, L., Li, X. Z., Su, Y., Guo, J., & Fu, H. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.05.019 · Cited by 427
Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions
Ma, Y., Wang, Q., Jiang, B., Li, C. L., Hao, J., Li, X., Dong, C., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.050 · Cited by 416
Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys
Troparevsky, M. C., Morris, J. R., Kent, P. R. C., Lupini, A. R., & Stocks, G. M. (2015) · Physical Review X · doi:10.1103/physrevx.5.011041 · Cited by 414
Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing
Wani, I. S., Bhattacharjee, T., Sheikh, S., Bhattacharjee, P. P., Guo, S. L., & Tsuji, N. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.08.048 · Cited by 411
Self-citation
TiZrNbTaMo high-entropy alloy designed for orthopedic implants: As-cast microstructure and mechanical properties
Wang, S., & Xu, J. Z. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.12.057 · Cited by 407
A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy
Lu, Y., Huang, H., Gao, X., Ren, C., Gao, J., Zhang, H., Zheng, S., Jin, Q., Zhao, Y., Lu, C., et al. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.09.034 · Cited by 407
Guidelines in predicting phase formation of high-entropy alloys
Zhang, Y., Lü, Z., G., S., Liaw, P. K., Tang, Z., Cheng, Y. Q., & Gao, M. C. (2014) · MRS Communications · doi:10.1557/mrc.2014.11 · Cited by 405
Microstructures and mechanical properties of Ti NbMoTaW refractory high-entropy alloys
Han, Z., Luan, H., Liu, X., Chen, N., Li, X., Shao, Y., & Yao, K. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.12.004 · Cited by 402
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S.-L., Zhu, J. H., Cao, W., & Kattner, U. R. (2013) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 400
Computational Thermodynamics Aided High-Entropy Alloy Design
Zhang, C., Zhang, F., Chen, S., & Cao, W. (2012) · JOM · doi:10.1007/s11837-012-0365-6 · Cited by 382
Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties
Li, Z., & Raabe, D. (2017) · JOM · doi:10.1007/s11837-017-2540-2 · Cited by 378
Phase selection rules for cast high entropy alloys: An overview
Guo, S. L. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000018 · Cited by 375
Self-citation
High-Entropy Alloys with a Hexagonal Close-Packed Structure Designed by Equi-Atomic Alloy Strategy and Binary Phase Diagrams
Takeuchi, A., Amiya, K., Wada, T., Yubuta, K., & Zhang, W. (2014) · JOM · doi:10.1007/s11837-014-1085-x · Cited by 368
NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
Yao, H., Qiao, J., Gao, M. C., Hawk, J. A., Ma, S. G., Zhou, H., & Zhang, Y. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.07.102 · Cited by 365
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
Laurent‐Brocq, M., Фагимовна, А. А., Perrière, L., Chebini, S., Sauvage, X., Leroy, É., & Champion, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.068 · Cited by 363
Searching for Next Single-Phase High-Entropy Alloy Compositions
Gao, M. C., & Alman, D. E. (2013) · Entropy · doi:10.3390/e15104504 · Cited by 348
Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted Al x CoCrFeNi high entropy alloys
Joseph, J., Jarvis, T., Wu, X., Stanford, N. E., Hodgson, P. D., & Fabijanic, D. M. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.02.072 · Cited by 346
Demystifying the sluggish diffusion effect in high entropy alloys
Dąbrowa, J., Zajusz, M., Kucza, W., Cieślak, G., Berent, K., Czeppe, T., Kulik, T., & Danielewski, M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.12.300 · Cited by 343
A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties
Jin, X., Bi, J., Zhang, L., Zhou, Y., Du, X., Liang, Y., & Li, B. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.176 · Cited by 342
Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy
Ng, C., Guo, S. L., Luan, J., Shi, S., & Liu, C. T. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.07.001 · Cited by 340
Self-citation
Effects of Al and Si addition on the structure and properties of CoFeNi equal atomic ratio alloy
Zuo, T., Li, R., Ren, X., & Zhang, Y. (2014) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2014.07.023 · Cited by 340
A machine learning-based alloy design system to facilitate the rational design of high entropy alloys with enhanced hardness
Chen, Y., Ren, C., Jia, Y., Wang, G., Li, M., & Lu, W. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117431 · Cited by 339
Effects of electro-negativity on the stability of topologically close-packed phase in high entropy alloys
Dong, Y., Lu, Y., Jiang, L., Wang, T., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.04.001 · Cited by 332
Machine learning guided appraisal and exploration of phase design for high entropy alloys
Zhou, Z., Zhou, Y., He, Q., Ding, Z., Li, F., & Yang, Y. G. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0265-1 · Cited by 328
Design of D022 superlattice with superior strengthening effect in high entropy alloys
He, F., Chen, D., Han, B., Wu, Q., Wang, Z., Wei, S., Wei, D., Wang, J., Liu, C. T., & Kai, J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.048 · Cited by 326
Self-citation
Microstructure and mechanical properties of multi-component AlCrFeNiMox high-entropy alloys
Dong, Y., Lu, Y., Kong, J., Zhang, J., & Li, T. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.03.253 · Cited by 323
A combinatorial assessment of AlxCrCuFeNi2 (0 < x < 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties
Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C. V., Yannetta, C. J., Chen, X., Ramanujan, R. V., Styles, M. J., Gibson, M. A., & Banerjee, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.025 · Cited by 323
Database on the mechanical properties of high entropy alloys and complex concentrated alloys
Gorsse, S., Nguyen, M. H., Senkov, O. N., & Miracle, D. B. (2018) · Data in Brief · doi:10.1016/j.dib.2018.11.111 · Cited by 322
The structure and properties of high-entropy alloys and nitride coatings based on them
Pogrebnjak, A. D., Bagdasaryan, A. A., Yakushchenko, I. V., & Beresnev, V. M. (2014) · Russian Chemical Reviews · doi:10.1070/rc2014v083n11abeh004407 · Cited by 321
Effect of Al addition on mechanical properties and microstructure of refractory AlxHfNbTaTiZr alloys
Lin, C.-M., Juan, C.-C., Chang, C., Tsai, C., & Yeh, J. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.064 · Cited by 319
Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication
Wang, R., Zhang, K., Davies, C. H. J., & Wu, X. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.138 · Cited by 307
Serration and noise behaviors in materials
Zhang, Y., Liu, J., Chen, S. Y., Xie, X., Liaw, P. K., Dahmen, K. A., Qiao, J. W., & Wang, Y. L. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.06.004 · Cited by 307
Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy
Park, J. M., Moon, J., Bae, J. W., Jang, M. J., Park, J., Lee, S., & Kim, H. S. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.02.031 · Cited by 296
Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy alloy
Ji, W., Fu, Z., Wang, W., Wang, H., Zhang, J., Wang, Y., & Zhang, F. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.11.146 · Cited by 294
Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process
Kang, B., Lee, J.-H., Ryu, H. J., & Hong, S. H. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.12.021 · Cited by 292
Engineering atomic-level complexity in high-entropy and complex concentrated alloys
Oh, H. S., Kim, S. J., Odbadrakh, K., Ryu, W. H., Yoon, K. N., Mu, S., Körmann, F., Ikeda, Y., Taşan, C. C., Raabe, D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10012-7 · Cited by 291
Design of Light-Weight High-Entropy Alloys
Feng, R., Gao, M. C., Lee, C., Mathes, M., Zuo, T., Chen, S.-Y., Hawk, J. A., Zhang, Y., & Liaw, P. K. (2016) · Entropy · doi:10.3390/e18090333 · Cited by 291
Single or Double: Which Is the Altar of Atomic Catalysts for Nitrogen Reduction Reaction?
Chen, Z., Yan, J., & Jiang, Q. (2018) · Small Methods · doi:10.1002/smtd.201800291 · Cited by 290
Microstructure and Compressive Properties of NbTiVTaAlx High Entropy Alloys
Yang, X. M., Zhang, Y., & Liaw, P. K. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.03.043 · Cited by 285
Valence electron concentration as an indicator for mechanical properties in rocksalt structure nitrides, carbides and carbonitrides
Balasubramanian, K., Khare, S. V., & Gall, D. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.04.033 · Cited by 282
Uncovering the eutectics design by machine learning in the Al–Co–Cr–Fe–Ni high entropy system
Wu, Q., Wang, Z., Hu, X., Zheng, T., Yang, Z., He, F., Li, J., & Wang, J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.10.043 · Cited by 280
Anomalous solidification microstructures in Co-free AlxCrCuFeNi2 high-entropy alloys
Guo, S. L., Ng, C., & Liu, C. T. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.01.007 · Cited by 280
Self-citation
Phase selection motifs in High Entropy Alloys revealed through combinatorial methods: Large atomic size difference favors BCC over FCC
Kube, S. A., Sohn, S., Uhl, D., Datye, A., Mehta, A., & Schroers, J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.023 · Cited by 272
High-entropy alloys fabricated via powder metallurgy. A critical review
Torralba, J. M., Alvaredo, P., & García‐Junceda, A. (2019) · Powder Metallurgy · doi:10.1080/00325899.2019.1584454 · Cited by 274
Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys
Xiao, D., Zhou, P., Wu, W. Q., Diao, H., Gao, M. C., Song, M. J., & Liaw, P. K. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.036 · Cited by 267
A novel Fe 20 Co 20 Ni 41 Al 19 eutectic high entropy alloy with excellent tensile properties
Jin, X., Zhou, Y., Zhang, L., Du, X., & Li, B. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.01.017 · Cited by 267
A new thermodynamic parameter to predict formation of solid solution or intermetallic phases in high entropy alloys
Senkov, O. N., & Miracle, D. B. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.10.279 · Cited by 263
Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys
Ma, D., Yao, M., Pradeep, K. G., Taşan, C. C., Springer, H., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.030 · Cited by 262
Formation, structure and properties of biocompatible TiZrHfNbTa high-entropy alloys
Yuan, Y., Wu, Y., Yang, Z. H., Xue, L., Lei, Z., Huang, H., Wang, H., Liu, X., An, K., Wu, W., et al. (2019) · Materials Research Letters · doi:10.1080/21663831.2019.1584592 · Cited by 260
Effect of Al addition on the microstructure, mechanical and wear properties of TiZrNbHf refractory high entropy alloys
Bhardwaj, V., Zhou, Q., Zhang, F., Han, W., Du, Y., Hua, K., & Wang, H. (2021) · Tribology International · doi:10.1016/j.triboint.2021.107031 · Cited by 260
(TiZrNbTa)-Mo high-entropy alloys: Dependence of microstructure and mechanical properties on Mo concentration and modeling of solid solution strengthening
Wang, S., & Xu, J. Z. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.01.017 · Cited by 259
Counting electrons - A new approach to tailor the hydrogen sorption properties of high-entropy alloys
Nygård, M. M., Ek, G., Karlsson, D., Sørby, M. H., Sahlberg, M., & Hauback, B. C. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.002 · Cited by 258
Modeling solid solution strengthening in high entropy alloys using machine learning
Wen, C., Wang, C., Zhang, Y., Antonov, S., Xue, D., Lookman, T., & Su, Y. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116917 · Cited by 259
Phase transformations of HfNbTaTiZr high-entropy alloy at intermediate temperatures
Chen, S. Y., Tong, Y., Tseng, K.-K., Yeh, J., Poplawsky, J. D., Wen, J., Gao, M. C., Kim, G., Chen, W., Ren, Y., et al. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.08.032 · Cited by 255

Authors: Guo, S., Ng, C., Lu, J., & Liu, C. T.
Affiliations: Hong Kong Polytechnic University (HK)
City University of Hong Kong 2 College of Science and Engineering, , Kowloon, Hong Kong
ORCID: Guo, Sheng
Liu, C. T.
Venue: Journal of Applied Physics
Publisher: AIP Publishing
Published: 2011-05-15
Volume: 109
Issue: 10
ISSN: 0021-8979 (ISSN-L)
1089-7550
DOI: 10.1063/1.3587228
OpenAlex: W1991258650
Cited by: 2,911
References: 28
Citations by year: 2026: 347 · 2025: 423 · 2024: 406 · 2023: 346 · 2022: 335 · 2021: 254 · 2020: 182 · 2019: 173 · 2018: 138 · 2017: 83 · 2016: 76 · 2015: 67 · 2014: 39 · 2013: 31 · 2012: 10
FWCI: 45.92
Type: journal article
Language: en
Open access: closed
Locations: Journal of Applied Physics (publishedVersion)
PolyU Institutional Research Archive (Hong Kong Polytechnic University) (submittedVersion)
Chalmers Research (Chalmers University of Technology) (submittedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
Keywords: high-entropy alloys, phase stability, valence electron concentration, FCC solid solution, BCC solid solution, excess enthalpy, solid solution formation, alloy design, thermodynamic properties

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks